diff mbox series

[v5,11/14] arm: dts: mt7629: add usb related nodes

Message ID 1586497552-12194-12-git-send-email-chunfeng.yun@mediatek.com
State Superseded
Headers show
Series Add support for MediaTek xHCI host controller | expand

Commit Message

Chunfeng Yun (云春峰) April 10, 2020, 5:45 a.m. UTC 
Add usb, phy and clock nodes

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v3~v5: no changes

v2:
    1. remove fixed clock clk20m
---
 arch/arm/dts/mt7629-rfb.dts |  8 ++++++++
 arch/arm/dts/mt7629.dtsi    | 41 +++++++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+)

Comments

Weijie Gao April 15, 2020, 7:17 a.m. UTC | #1 
On Fri, 2020-04-10 at 13:45 +0800, Chunfeng Yun wrote:
> Add usb, phy and clock nodes
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> ---
> v3~v5: no changes
> 
> v2:
>     1. remove fixed clock clk20m
> ---
>  arch/arm/dts/mt7629-rfb.dts |  8 ++++++++
>  arch/arm/dts/mt7629.dtsi    | 41 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 49 insertions(+)
> 

Reviewed-by: Weijie Gao <weijie.gao at mediatek.com>
diff mbox series

Patch

diff --git a/arch/arm/dts/mt7629-rfb.dts b/arch/arm/dts/mt7629-rfb.dts
index 687fe1c029..bf84f76344 100644
--- a/arch/arm/dts/mt7629-rfb.dts
+++ b/arch/arm/dts/mt7629-rfb.dts
@@ -82,6 +82,14 @@ 
 	status = "okay";
 };
 
+&xhci {
+	status = "okay";
+};
+
+&u3phy {
+	status = "okay";
+};
+
 &watchdog {
 	pinctrl-names = "default";
 	pinctrl-0 = <&watchdog_pins>;
diff --git a/arch/arm/dts/mt7629.dtsi b/arch/arm/dts/mt7629.dtsi
index a33a74a556..d1c99c5d6a 100644
--- a/arch/arm/dts/mt7629.dtsi
+++ b/arch/arm/dts/mt7629.dtsi
@@ -11,6 +11,7 @@ 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/mt7629-power.h>
 #include <dt-bindings/reset/mt7629-reset.h>
+#include <dt-bindings/phy/phy.h>
 #include "skeleton.dtsi"
 
 / {
@@ -222,6 +223,46 @@ 
 		#size-cells = <0>;
 	};
 
+	ssusbsys: ssusbsys at 1a000000 {
+		compatible = "mediatek,mt7629-ssusbsys", "syscon";
+		reg = <0x1a000000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	xhci: usb at 1a0c0000 {
+		compatible = "mediatek,mt7629-xhci", "mediatek,mtk-xhci";
+		reg = <0x1a0c0000 0x1000>, <0x1a0c3e00 0x0100>;
+		reg-names = "mac", "ippc";
+		power-domains = <&scpsys MT7629_POWER_DOMAIN_HIF1>;
+		clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+			 <&ssusbsys CLK_SSUSB_REF_EN>,
+			 <&ssusbsys CLK_SSUSB_MCU_EN>,
+			 <&ssusbsys CLK_SSUSB_DMA_EN>;
+		clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy: usb-phy at 1a0c4000 {
+		compatible = "mediatek,mt7629-tphy", "mediatek,generic-tphy-v2";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1a0c4000 0x1000>;
+		status = "disabled";
+
+		u2port0: usb-phy at 0 {
+			reg = <0x0 0x0700>;
+			#phy-cells = <1>;
+			clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+			clock-names = "ref";
+		};
+
+		u3port0: usb-phy at 700 {
+			reg = <0x0700 0x0700>;
+			#phy-cells = <1>;
+		};
+	};
+
 	ethsys: syscon at 1b000000 {
 		compatible = "mediatek,mt7629-ethsys", "syscon";
 		reg = <0x1b000000 0x1000>;