@@ -30,6 +30,12 @@ config USB_XHCI_DWC3_OF_SIMPLE
Support USB2/3 functionality in simple SoC integrations with
USB controller based on the DesignWare USB3 IP Core.
+config USB_XHCI_MTK
+ bool "Support for MediaTek on-chip xHCI USB controller"
+ depends on ARCH_MEDIATEK
+ help
+ Enables support for the on-chip xHCI controller on MediaTek SoCs.
+
config USB_XHCI_MVEBU
bool "MVEBU USB 3.0 support"
default y
@@ -50,6 +50,7 @@ obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o
obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o
+obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o
obj-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o
obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
new file mode 100644
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 MediaTek, Inc.
+ * Authors: Chunfeng Yun <chunfeng.yun at mediatek.com>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <dm/devres.h>
+#include <generic-phy.h>
+#include <malloc.h>
+#include <usb.h>
+#include <linux/errno.h>
+#include <linux/compat.h>
+#include <power/regulator.h>
+#include <linux/iopoll.h>
+#include <usb/xhci.h>
+
+/* IPPC (IP Port Control) registers */
+#define IPPC_IP_PW_CTRL0 0x00
+#define CTRL0_IP_SW_RST BIT(0)
+
+#define IPPC_IP_PW_CTRL1 0x04
+#define CTRL1_IP_HOST_PDN BIT(0)
+
+#define IPPC_IP_PW_STS1 0x10
+#define STS1_IP_SLEEP_STS BIT(30)
+#define STS1_U3_MAC_RST BIT(16)
+#define STS1_XHCI_RST BIT(11)
+#define STS1_SYS125_RST BIT(10)
+#define STS1_REF_RST BIT(8)
+#define STS1_SYSPLL_STABLE BIT(0)
+
+#define IPPC_IP_XHCI_CAP 0x24
+#define CAP_U3_PORT_NUM(p) ((p) & 0xff)
+#define CAP_U2_PORT_NUM(p) (((p) >> 8) & 0xff)
+
+#define IPPC_U3_CTRL_0P 0x30
+#define CTRL_U3_PORT_HOST_SEL BIT(2)
+#define CTRL_U3_PORT_PDN BIT(1)
+#define CTRL_U3_PORT_DIS BIT(0)
+
+#define IPPC_U2_CTRL_0P 0x50
+#define CTRL_U2_PORT_HOST_SEL BIT(2)
+#define CTRL_U2_PORT_PDN BIT(1)
+#define CTRL_U2_PORT_DIS BIT(0)
+
+#define IPPC_U3_CTRL(p) (IPPC_U3_CTRL_0P + ((p) * 0x08))
+#define IPPC_U2_CTRL(p) (IPPC_U2_CTRL_0P + ((p) * 0x08))
+
+struct mtk_xhci {
+ struct xhci_ctrl ctrl; /* Needs to come first in this struct! */
+ struct xhci_hccr *hcd;
+ void __iomem *ippc;
+ struct udevice *dev;
+ struct udevice *vusb33_supply;
+ struct udevice *vbus_supply;
+ struct clk_bulk clks;
+ struct phy_bulk phys;
+ int num_u2ports;
+ int num_u3ports;
+};
+
+static int xhci_mtk_host_enable(struct mtk_xhci *mtk)
+{
+ u32 value;
+ u32 check_val;
+ int ret;
+ int i;
+
+ /* power on host ip */
+ clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
+
+ /* power on and enable all u3 ports */
+ for (i = 0; i < mtk->num_u3ports; i++) {
+ clrsetbits_le32(mtk->ippc + IPPC_U3_CTRL(i),
+ CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS,
+ CTRL_U3_PORT_HOST_SEL);
+ }
+
+ /* power on and enable all u2 ports */
+ for (i = 0; i < mtk->num_u2ports; i++) {
+ clrsetbits_le32(mtk->ippc + IPPC_U2_CTRL(i),
+ CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS,
+ CTRL_U2_PORT_HOST_SEL);
+ }
+
+ /*
+ * wait for clocks to be stable, and clock domains reset to
+ * be inactive after power on and enable ports
+ */
+ check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
+ STS1_SYS125_RST | STS1_XHCI_RST;
+
+ if (mtk->num_u3ports)
+ check_val |= STS1_U3_MAC_RST;
+
+ ret = readl_poll_timeout(mtk->ippc + IPPC_IP_PW_STS1, value,
+ (check_val == (value & check_val)), 20000);
+ if (ret)
+ dev_err(mtk->dev, "clocks are not stable 0x%x!\n", value);
+
+ return ret;
+}
+
+static int xhci_mtk_host_disable(struct mtk_xhci *mtk)
+{
+ int i;
+
+ /* power down all u3 ports */
+ for (i = 0; i < mtk->num_u3ports; i++)
+ setbits_le32(mtk->ippc + IPPC_U3_CTRL(i), CTRL_U3_PORT_PDN);
+
+ /* power down all u2 ports */
+ for (i = 0; i < mtk->num_u2ports; i++)
+ setbits_le32(mtk->ippc + IPPC_U2_CTRL(i), CTRL_U2_PORT_PDN);
+
+ /* power down host ip */
+ setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
+
+ return 0;
+}
+
+static int xhci_mtk_ssusb_init(struct mtk_xhci *mtk)
+{
+ u32 value;
+
+ /* reset whole ip */
+ setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST);
+ udelay(1);
+ clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST);
+
+ value = readl(mtk->ippc + IPPC_IP_XHCI_CAP);
+ mtk->num_u3ports = CAP_U3_PORT_NUM(value);
+ mtk->num_u2ports = CAP_U2_PORT_NUM(value);
+ dev_info(mtk->dev, "u2p:%d, u3p:%d\n",
+ mtk->num_u2ports, mtk->num_u3ports);
+
+ return xhci_mtk_host_enable(mtk);
+}
+
+static int xhci_mtk_ofdata_get(struct mtk_xhci *mtk)
+{
+ struct udevice *dev = mtk->dev;
+ int ret = 0;
+
+ mtk->hcd = devfdt_remap_addr_name(dev, "mac");
+ if (!mtk->hcd) {
+ dev_err(dev, "failed to get xHCI base address\n");
+ return -ENXIO;
+ }
+
+ mtk->ippc = devfdt_remap_addr_name(dev, "ippc");
+ if (!mtk->ippc) {
+ dev_err(dev, "failed to get IPPC base address\n");
+ return -ENXIO;
+ }
+
+ dev_info(dev, "hcd: 0x%p, ippc: 0x%p\n", mtk->hcd, mtk->ippc);
+
+ ret = clk_get_bulk(dev, &mtk->clks);
+ if (ret) {
+ dev_err(dev, "failed to get clocks %d!\n", ret);
+ return ret;
+ }
+
+ ret = device_get_supply_regulator(dev, "vusb33-supply",
+ &mtk->vusb33_supply);
+ if (ret)
+ debug("can't get vusb33 regulator %d!\n", ret);
+
+ ret = device_get_supply_regulator(dev, "vbus-supply",
+ &mtk->vbus_supply);
+ if (ret)
+ debug("can't get vbus regulator %d!\n", ret);
+
+ return 0;
+}
+
+static int xhci_mtk_ldos_enable(struct mtk_xhci *mtk)
+{
+ int ret;
+
+ ret = regulator_set_enable(mtk->vusb33_supply, true);
+ if (ret < 0 && ret != -ENOSYS) {
+ dev_err(mtk->dev, "failed to enable vusb33 %d!\n", ret);
+ return ret;
+ }
+
+ ret = regulator_set_enable(mtk->vbus_supply, true);
+ if (ret < 0 && ret != -ENOSYS) {
+ dev_err(mtk->dev, "failed to enable vbus %d!\n", ret);
+ regulator_set_enable(mtk->vusb33_supply, false);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void xhci_mtk_ldos_disable(struct mtk_xhci *mtk)
+{
+ regulator_set_enable(mtk->vbus_supply, false);
+ regulator_set_enable(mtk->vusb33_supply, false);
+}
+
+int xhci_mtk_phy_setup(struct mtk_xhci *mtk)
+{
+ struct udevice *dev = mtk->dev;
+ struct phy_bulk *phys = &mtk->phys;
+ int ret;
+
+ ret = generic_phy_get_bulk(dev, phys);
+ if (ret) {
+ dev_err(dev, "failed to get phys %d!\n", ret);
+ return ret;
+ }
+
+ return generic_phy_enable_bulk(phys);
+}
+
+void xhci_mtk_phy_shutdown(struct mtk_xhci *mtk)
+{
+ generic_phy_disable_bulk(&mtk->phys);
+}
+
+static int xhci_mtk_probe(struct udevice *dev)
+{
+ struct mtk_xhci *mtk = dev_get_priv(dev);
+ struct xhci_hcor *hcor;
+ int ret;
+
+ mtk->dev = dev;
+ ret = xhci_mtk_ofdata_get(mtk);
+ if (ret)
+ return ret;
+
+ ret = xhci_mtk_ldos_enable(mtk);
+ if (ret)
+ goto ldos_err;
+
+ ret = clk_enable_bulk(&mtk->clks);
+ if (ret)
+ goto clks_err;
+
+ ret = xhci_mtk_phy_setup(mtk);
+ if (ret)
+ goto phys_err;
+
+ ret = xhci_mtk_ssusb_init(mtk);
+ if (ret)
+ goto ssusb_init_err;
+
+ hcor = (struct xhci_hcor *)((uintptr_t)mtk->hcd +
+ HC_LENGTH(xhci_readl(&mtk->hcd->cr_capbase)));
+
+ return xhci_register(dev, mtk->hcd, hcor);
+
+ssusb_init_err:
+ xhci_mtk_phy_shutdown(mtk);
+phys_err:
+ clk_disable_bulk(&mtk->clks);
+clks_err:
+ xhci_mtk_ldos_disable(mtk);
+ldos_err:
+ return ret;
+}
+
+static int xhci_mtk_remove(struct udevice *dev)
+{
+ struct mtk_xhci *mtk = dev_get_priv(dev);
+
+ xhci_deregister(dev);
+ xhci_mtk_host_disable(mtk);
+ xhci_mtk_ldos_disable(mtk);
+ clk_disable_bulk(&mtk->clks);
+
+ return 0;
+}
+
+static const struct udevice_id xhci_mtk_ids[] = {
+ { .compatible = "mediatek,mtk-xhci" },
+ { }
+};
+
+U_BOOT_DRIVER(usb_xhci) = {
+ .name = "xhci-mtk",
+ .id = UCLASS_USB,
+ .of_match = xhci_mtk_ids,
+ .probe = xhci_mtk_probe,
+ .remove = xhci_mtk_remove,
+ .ops = &xhci_usb_ops,
+ .bind = dm_scan_fdt_dev,
+ .priv_auto_alloc_size = sizeof(struct mtk_xhci),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
@@ -610,6 +610,16 @@ static int xhci_set_configuration(struct usb_device *udev)
ep_ctx[ep_index]->tx_info =
cpu_to_le32(EP_MAX_ESIT_PAYLOAD_LO(max_esit_payload) |
EP_AVG_TRB_LENGTH(avg_trb_len));
+
+ /*
+ * The MediaTek xHCI defines some extra SW parameters which
+ * are put into reserved DWs in Slot and Endpoint Contexts
+ * for synchronous endpoints.
+ */
+ if (IS_ENABLED(CONFIG_USB_XHCI_MTK)) {
+ ep_ctx[ep_index]->reserved[0] =
+ cpu_to_le32(EP_BPKTS(1) | EP_BBM(1));
+ }
}
return xhci_configure_endpoints(udev, false);
@@ -670,6 +670,9 @@ struct xhci_ep_ctx {
/* deq bitmasks */
#define EP_CTX_CYCLE_MASK (1 << 0)
+/* reserved[0] bitmasks, MediaTek xHCI used */
+#define EP_BPKTS(p) (((p) & 0x7f) << 0)
+#define EP_BBM(p) (((p) & 0x1) << 11)
/**
* struct xhci_input_control_context
This patch is used to support the on-chip xHCI controller on MediaTek SoCs, currently control/bulk/interrupt transfers are supported. Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com> --- v5: 1. print error number suggested by Marek 2. support interrupt transfer v4: 1. use phy_bulk API v3: 1. use macro approach to access registers suggested by Marek v2: 1. use clk_bulk to get clocks suggested by Marek 2. use clrsetbits_le32() etc suggeseted by Marek --- drivers/usb/host/Kconfig | 6 + drivers/usb/host/Makefile | 1 + drivers/usb/host/xhci-mtk.c | 296 ++++++++++++++++++++++++++++++++++++ drivers/usb/host/xhci.c | 10 ++ include/usb/xhci.h | 3 + 5 files changed, 316 insertions(+) create mode 100644 drivers/usb/host/xhci-mtk.c