[v2,1/3] mmc: sdhci: use phys2bus macro when dma address is accessed

Use phys2bus macro when dma address is accessed.
Some targets need to use pyhs2bus macro. (e.g, RPI4)
After applied it, SDMA mode can be used.

Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
---
Changelog on V2
- None

 drivers/mmc/sdhci.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

On 18/02/2020 10:25, Jaehoon Chung wrote:
> Use phys2bus macro when dma address is accessed.
> Some targets need to use pyhs2bus macro. (e.g, RPI4)
> After applied it, SDMA mode can be used.
> 
> Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
> Reviewed-by: Peng Fan <peng.fan at nxp.com>
> ---
> Changelog on V2
> - None
> 
>  drivers/mmc/sdhci.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> index 01fa5a9d4d..93c9049c5d 100644
> --- a/drivers/mmc/sdhci.c
> +++ b/drivers/mmc/sdhci.c
> @@ -15,6 +15,7 @@
>  #include <mmc.h>
>  #include <sdhci.h>
>  #include <dm.h>
> +#include <phys2bus.h>
>  
>  #if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
>  void *aligned_buffer = (void *)CONFIG_FIXED_SDHCI_ALIGNED_BUFFER;
> @@ -164,7 +165,8 @@ static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
>  		if (data->flags != MMC_DATA_READ)
>  			memcpy(aligned_buffer, data->src, trans_bytes);
>  #endif
> -		sdhci_writel(host, host->start_addr, SDHCI_DMA_ADDRESS);
> +		sdhci_writel(host, phys_to_bus((ulong)host->start_addr),
> +				SDHCI_DMA_ADDRESS);
>  
>  	} else if (host->flags & (USE_ADMA | USE_ADMA64)) {
>  		sdhci_prepare_adma_table(host, data);
> @@ -220,7 +222,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data)
>  				start_addr &=
>  				~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1);
>  				start_addr += SDHCI_DEFAULT_BOUNDARY_SIZE;
> -				sdhci_writel(host, start_addr,
> +				sdhci_writel(host, phys_to_bus((ulong)start_addr),
>  					     SDHCI_DMA_ADDRESS);
>  			}
>  		}
> 

Reviewed-by: Minkyu Kang <mk7.kang at samsung.com>

Thanks,
Minkyu Kang.