| Message ID | 20200615161512.19150-2-amelie.delaunay@st.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/6] dt-bindings: connector: add power-opmode optional property to usb-connector | expand |
On Mon, Jun 15, 2020 at 06:15:07PM +0200, Amelie Delaunay wrote: > Power operation mode may depends on hardware design, so, add the optional > property power-opmode for usb-c connector to select the power operation > mode capability. > > Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> > --- > .../devicetree/bindings/connector/usb-connector.yaml | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml > index 9bd52e63c935..cd7feb2d4984 100644 > --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml > +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml > @@ -88,6 +88,17 @@ properties: > - device > - dual > > + power-opmode: > + description: Determines the power operation mode that the Type C connector > + will support. > + allOf: > + - $ref: /schemas/types.yaml#definitions/string > + enum: > + - default Wouldn't this just be no property? > + - 1.5A > + - 3.0A You'll need to explain these better. > + - usb_power_delivery I would have thought 'default' would be USB-PD. Though I thought Type-C was always USB-PD. > + > # The following are optional properties for "usb-c-connector" with power > # delivery support. > source-pdos: > -- > 2.17.1 >
Hi Rob, On 7/15/20 8:19 PM, Rob Herring wrote: > On Mon, Jun 15, 2020 at 06:15:07PM +0200, Amelie Delaunay wrote: >> Power operation mode may depends on hardware design, so, add the optional >> property power-opmode for usb-c connector to select the power operation >> mode capability. >> >> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> >> --- >> .../devicetree/bindings/connector/usb-connector.yaml | 11 +++++++++++ >> 1 file changed, 11 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml >> index 9bd52e63c935..cd7feb2d4984 100644 >> --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml >> +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml >> @@ -88,6 +88,17 @@ properties: >> - device >> - dual >> >> + power-opmode: >> + description: Determines the power operation mode that the Type C connector >> + will support. >> + allOf: >> + - $ref: /schemas/types.yaml#definitions/string >> + enum: >> + - default > > Wouldn't this just be no property? No because the aim of this optional property is to re-configure the Type-C controller power operation mode. So, when using power-opmode = "default", the use can re-configure it to the 'default' USB power operation mode - 500mA for USB2 or 900mA for USB3. > >> + - 1.5A >> + - 3.0A > > You'll need to explain these better. > Ok I'll add a description in V2. >> + - usb_power_delivery > > I would have thought 'default' would be USB-PD. Though I thought Type-C > was always USB-PD. > In fact, the DT property matches the typec_pwr_opmode enum and typec_pwr_opmodes strings tab: static const char * const typec_pwr_opmodes[] = { [TYPEC_PWR_MODE_USB] = "default", [TYPEC_PWR_MODE_1_5A] = "1.5A", [TYPEC_PWR_MODE_3_0A] = "3.0A", [TYPEC_PWR_MODE_PD] = "usb_power_delivery", }; The same is done for data-role and power-role properties. So, I would keep "default", "1.5A", "3.0A" and "usb_power_delivery", and I'll add a description for each. Is it OK for you ? Regards, Amelie >> + >> # The following are optional properties for "usb-c-connector" with power >> # delivery support. >> source-pdos: >> -- >> 2.17.1 >>
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 9bd52e63c935..cd7feb2d4984 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -88,6 +88,17 @@ properties: - device - dual + power-opmode: + description: Determines the power operation mode that the Type C connector + will support. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - default + - 1.5A + - 3.0A + - usb_power_delivery + # The following are optional properties for "usb-c-connector" with power # delivery support. source-pdos:
Power operation mode may depends on hardware design, so, add the optional property power-opmode for usb-c connector to select the power operation mode capability. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- .../devicetree/bindings/connector/usb-connector.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+)