diff mbox series

mmc: sdio: Move SDIO IDs from rsi_sdio driver to common include file

Message ID 20200629072144.24351-1-pali@kernel.org
State New
Headers show
Series mmc: sdio: Move SDIO IDs from rsi_sdio driver to common include file | expand

Commit Message

Pali Rohár June 29, 2020, 7:21 a.m. UTC 
Define appropriate macro names for consistency with other macros.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
Hello Ulf! I forgot to include change for rsi driver into patch series:
"mmc: sdio: Move SDIO IDs from drivers to common include file"
https://lore.kernel.org/linux-mmc/20200522144412.19712-1-pali@kernel.org/
As patch series was already merged, I'm sending this patch separately.
---
 drivers/net/wireless/rsi/rsi_91x_sdio.c | 8 ++++----
 drivers/net/wireless/rsi/rsi_sdio.h     | 4 ----
 include/linux/mmc/sdio_ids.h            | 4 ++++
 3 files changed, 8 insertions(+), 8 deletions(-)

Comments

Kalle Valo July 13, 2020, 2:38 p.m. UTC | #1 
Ulf Hansson <ulf.hansson@linaro.org> writes:

> On Mon, 29 Jun 2020 at 09:22, Pali Rohár <pali@kernel.org> wrote:

>>

>> Define appropriate macro names for consistency with other macros.

>>

>> Signed-off-by: Pali Rohár <pali@kernel.org>

>

> Applied for next, thanks!

>

> If it turns out that it's a better idea to funnel this via Kale's

> wireless tree, then I can drop it - and you may consider this as an

> ack instead.


I'm not expecting any conflicts with this so going via mmc tree is fine
with me.

Acked-by: Kalle Valo <kvalo@codeaurora.org>


-- 
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
diff mbox series

Patch

diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 5d6143a55187..a04ff75c409f 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -1038,10 +1038,10 @@  static int rsi_probe(struct sdio_func *pfunction,
 		goto fail_free_adapter;
 	}
 
-	if (pfunction->device == RSI_SDIO_PID_9113) {
+	if (pfunction->device == SDIO_DEVICE_ID_RSI_9113) {
 		rsi_dbg(ERR_ZONE, "%s: 9113 module detected\n", __func__);
 		adapter->device_model = RSI_DEV_9113;
-	} else  if (pfunction->device == RSI_SDIO_PID_9116) {
+	} else  if (pfunction->device == SDIO_DEVICE_ID_RSI_9116) {
 		rsi_dbg(ERR_ZONE, "%s: 9116 module detected\n", __func__);
 		adapter->device_model = RSI_DEV_9116;
 	} else {
@@ -1526,8 +1526,8 @@  static const struct dev_pm_ops rsi_pm_ops = {
 #endif
 
 static const struct sdio_device_id rsi_dev_table[] =  {
-	{ SDIO_DEVICE(RSI_SDIO_VENDOR_ID, RSI_SDIO_PID_9113) },
-	{ SDIO_DEVICE(RSI_SDIO_VENDOR_ID, RSI_SDIO_PID_9116) },
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_RSI, SDIO_DEVICE_ID_RSI_9113) },
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_RSI, SDIO_DEVICE_ID_RSI_9116) },
 	{ /* Blank */},
 };
 
diff --git a/drivers/net/wireless/rsi/rsi_sdio.h b/drivers/net/wireless/rsi/rsi_sdio.h
index c5cfb6238f73..9afc1d0d2684 100644
--- a/drivers/net/wireless/rsi/rsi_sdio.h
+++ b/drivers/net/wireless/rsi/rsi_sdio.h
@@ -28,10 +28,6 @@ 
 #include <linux/mmc/sdio_ids.h>
 #include "rsi_main.h"
 
-#define RSI_SDIO_VENDOR_ID   0x041B
-#define RSI_SDIO_PID_9113    0x9330
-#define RSI_SDIO_PID_9116    0x9116
-
 enum sdio_interrupt_type {
 	BUFFER_FULL         = 0x0,
 	BUFFER_AVAILABLE    = 0x2,
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 15ed8ce9d394..ab41801c5f51 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -118,6 +118,10 @@ 
 #define SDIO_DEVICE_ID_SIANO_NOVA_A0		0x1100
 #define SDIO_DEVICE_ID_SIANO_STELLAR 		0x5347
 
+#define SDIO_VENDOR_ID_RSI			0x041b
+#define SDIO_DEVICE_ID_RSI_9113			0x9330
+#define SDIO_DEVICE_ID_RSI_9116			0x9116
+
 #define SDIO_VENDOR_ID_TI_WL1251		0x104c
 #define SDIO_DEVICE_ID_TI_WL1251		0x9066