diff mbox series

[6/7] arm64: dts: qcom: pm8150: enable rtc device

Message ID 20200604004331.669936-6-dmitry.baryshkov@linaro.org
State New
Headers show
Series [1/7] arm64: dts: qcom: pm8009: Add base dts file | expand

Commit Message

Dmitry Baryshkov June 4, 2020, 12:43 a.m. UTC
Enable rtc device provided by the pmic.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

---
 arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 --
 1 file changed, 2 deletions(-)

-- 
2.26.2

Comments

Manivannan Sadhasivam June 4, 2020, 6:09 a.m. UTC | #1
On Thu, Jun 04, 2020 at 03:43:30AM +0300, Dmitry Baryshkov wrote:
> Enable rtc device provided by the pmic.

> 

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>


Thanks,
Mani

> ---

>  arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 --

>  1 file changed, 2 deletions(-)

> 

> diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi

> index fee2db42f4cb..762fb902db81 100644

> --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi

> +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi

> @@ -71,8 +71,6 @@ rtc@6000 {

>  			reg = <0x6000>;

>  			reg-names = "rtc", "alarm";

>  			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;

> -

> -			status = "disabled";

>  		};

>  

>  		pm8150_gpios: gpio@c000 {

> -- 

> 2.26.2

>
Vinod Koul June 4, 2020, 10:51 a.m. UTC | #2
On 04-06-20, 03:43, Dmitry Baryshkov wrote:
> Enable rtc device provided by the pmic.

> 

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---

>  arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 --

>  1 file changed, 2 deletions(-)

> 

> diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi

> index fee2db42f4cb..762fb902db81 100644

> --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi

> +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi

> @@ -71,8 +71,6 @@ rtc@6000 {

>  			reg = <0x6000>;

>  			reg-names = "rtc", "alarm";

>  			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;

> -

> -			status = "disabled";


Again, pls enable in your board dts...

Thanks

-- 
~Vinod
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index fee2db42f4cb..762fb902db81 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -71,8 +71,6 @@  rtc@6000 {
 			reg = <0x6000>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
-
-			status = "disabled";
 		};
 
 		pm8150_gpios: gpio@c000 {