diff mbox series

dt-bindings: mtd: Convert Denali NAND controller to json-schema

Message ID 20200222141927.3868-1-yamada.masahiro@socionext.com
State New
Headers show
Series dt-bindings: mtd: Convert Denali NAND controller to json-schema | expand

Commit Message

Masahiro Yamada Feb. 22, 2020, 2:19 p.m. UTC
Convert the Denali NAND controller binding to DT schema format.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

 .../devicetree/bindings/mtd/denali,nand.yaml  | 149 ++++++++++++++++++
 .../devicetree/bindings/mtd/denali-nand.txt   |  61 -------
 2 files changed, 149 insertions(+), 61 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/denali,nand.yaml
 delete mode 100644 Documentation/devicetree/bindings/mtd/denali-nand.txt

-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Comments

Rob Herring (Arm) Feb. 26, 2020, 10:21 p.m. UTC | #1
On Sat, 22 Feb 2020 23:19:26 +0900, Masahiro Yamada wrote:
> Convert the Denali NAND controller binding to DT schema format.

> 

> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

> ---

> 

>  .../devicetree/bindings/mtd/denali,nand.yaml  | 149 ++++++++++++++++++

>  .../devicetree/bindings/mtd/denali-nand.txt   |  61 -------

>  2 files changed, 149 insertions(+), 61 deletions(-)

>  create mode 100644 Documentation/devicetree/bindings/mtd/denali,nand.yaml

>  delete mode 100644 Documentation/devicetree/bindings/mtd/denali-nand.txt

> 


Applied, thanks.

Rob

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Masahiro Yamada Feb. 27, 2020, 1:58 a.m. UTC | #2
Hi Rob,


This was applied, but I just noticed one stupid mistake.



On Sat, Feb 22, 2020 at 11:20 PM Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
>

> Convert the Denali NAND controller binding to DT schema format.

>

> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

> ---

>

>  .../devicetree/bindings/mtd/denali,nand.yaml  | 149 ++++++++++++++++++

>  .../devicetree/bindings/mtd/denali-nand.txt   |  61 -------

>  2 files changed, 149 insertions(+), 61 deletions(-)

>  create mode 100644 Documentation/devicetree/bindings/mtd/denali,nand.yaml

>  delete mode 100644 Documentation/devicetree/bindings/mtd/denali-nand.txt

>

> diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml

> new file mode 100644

> index 000000000000..b41b7e4bfe78

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml

> @@ -0,0 +1,149 @@

> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause

> +%YAML 1.2

> +---

> +$id: http://devicetree.org/schemas/mtd/denali,nand.yaml#

> +$schema: http://devicetree.org/meta-schemas/core.yaml#

> +

> +title: Denali NAND controller

> +

> +maintainers:

> +  - Masahiro Yamada <yamada.masahiro@socionext.com>

> +

> +properties:

> +  compatible:

> +    description: version 2.91, 3.1, 3.1.1, respectively



Please delete this description.

This is a copy-paste mistake, which
came from my other patch
"dt-bindings: mmc: Convert UniPhier SD controller to json-schema"




> +    enum:

> +      - altr,socfpga-denali-nand

> +      - socionext,uniphier-denali-nand-v5a

> +      - socionext,uniphier-denali-nand-v5b

> +





-- 
Best Regards
Masahiro Yamada

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Rob Herring Feb. 27, 2020, 1:44 p.m. UTC | #3
On Wed, Feb 26, 2020 at 7:59 PM Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
>

> Hi Rob,

>

>

> This was applied, but I just noticed one stupid mistake.

>

>

>

> On Sat, Feb 22, 2020 at 11:20 PM Masahiro Yamada

> <yamada.masahiro@socionext.com> wrote:

> >

> > Convert the Denali NAND controller binding to DT schema format.

> >

> > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

> > ---

> >

> >  .../devicetree/bindings/mtd/denali,nand.yaml  | 149 ++++++++++++++++++

> >  .../devicetree/bindings/mtd/denali-nand.txt   |  61 -------

> >  2 files changed, 149 insertions(+), 61 deletions(-)

> >  create mode 100644 Documentation/devicetree/bindings/mtd/denali,nand.yaml

> >  delete mode 100644 Documentation/devicetree/bindings/mtd/denali-nand.txt

> >

> > diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml

> > new file mode 100644

> > index 000000000000..b41b7e4bfe78

> > --- /dev/null

> > +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml

> > @@ -0,0 +1,149 @@

> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause

> > +%YAML 1.2

> > +---

> > +$id: http://devicetree.org/schemas/mtd/denali,nand.yaml#

> > +$schema: http://devicetree.org/meta-schemas/core.yaml#

> > +

> > +title: Denali NAND controller

> > +

> > +maintainers:

> > +  - Masahiro Yamada <yamada.masahiro@socionext.com>

> > +

> > +properties:

> > +  compatible:

> > +    description: version 2.91, 3.1, 3.1.1, respectively

>

>

> Please delete this description.

>

> This is a copy-paste mistake, which

> came from my other patch

> "dt-bindings: mmc: Convert UniPhier SD controller to json-schema"


Done.

Rob

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
new file mode 100644
index 000000000000..b41b7e4bfe78
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
@@ -0,0 +1,149 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/denali,nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Denali NAND controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    description: version 2.91, 3.1, 3.1.1, respectively
+    enum:
+      - altr,socfpga-denali-nand
+      - socionext,uniphier-denali-nand-v5a
+      - socionext,uniphier-denali-nand-v5b
+
+  reg-names:
+    description: |
+      There are two register regions:
+        nand_data:  host data/command interface
+        denali_reg: register interface
+    items:
+      - const: nand_data
+      - const: denali_reg
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    description: |
+      There are three clocks:
+        nand:   controller core clock
+        nand_x: bus interface clock
+        ecc:    ECC circuit clock
+    items:
+      - const: nand
+      - const: nand_x
+      - const: ecc
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  reset-names:
+    description: |
+      There are two optional resets:
+        nand: controller core reset
+        reg:  register reset
+    oneOf:
+      - items:
+        - const: nand
+        - const: reg
+      - const: nand
+      - const: reg
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+allOf:
+  - $ref: nand-controller.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: altr,socfpga-denali-nand
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 15
+            nand-ecc-step-size:
+              enum:
+                - 512
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-denali-nand-v5a
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 16
+                - 24
+            nand-ecc-step-size:
+              enum:
+                - 1024
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-denali-nand-v5b
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 16
+            nand-ecc-step-size:
+              enum:
+                - 1024
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+examples:
+  - |
+    nand-controller@ff900000 {
+        compatible = "altr,socfpga-denali-nand";
+        reg-names = "nand_data", "denali_reg";
+        reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
+        interrupts = <0 144 4>;
+        clock-names = "nand", "nand_x", "ecc";
+        clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+        reset-names = "nand", "reg";
+        resets = <&nand_rst>, <&nand_reg_rst>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+                reg = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
deleted file mode 100644
index 98916a84bbf6..000000000000
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ /dev/null
@@ -1,61 +0,0 @@ 
-* Denali NAND controller
-
-Required properties:
-  - compatible : should be one of the following:
-      "altr,socfpga-denali-nand"            - for Altera SOCFPGA
-      "socionext,uniphier-denali-nand-v5a"  - for Socionext UniPhier (v5a)
-      "socionext,uniphier-denali-nand-v5b"  - for Socionext UniPhier (v5b)
-  - reg : should contain registers location and length for data and reg.
-  - reg-names: Should contain the reg names "nand_data" and "denali_reg"
-  - #address-cells: should be 1. The cell encodes the chip select connection.
-  - #size-cells : should be 0.
-  - interrupts : The interrupt number.
-  - clocks: should contain phandle of the controller core clock, the bus
-    interface clock, and the ECC circuit clock.
-  - clock-names: should contain "nand", "nand_x", "ecc"
-
-Optional properties:
-  - resets: may contain phandles to the controller core reset, the register
-    reset
-  - reset-names: may contain "nand", "reg"
-
-Sub-nodes:
-  Sub-nodes represent available NAND chips.
-
-  Required properties:
-    - reg: should contain the bank ID of the controller to which each chip
-      select is connected.
-
-  Optional properties:
-    - nand-ecc-step-size: see nand-controller.yaml for details.
-      If present, the value must be
-        512        for "altr,socfpga-denali-nand"
-        1024       for "socionext,uniphier-denali-nand-v5a"
-        1024       for "socionext,uniphier-denali-nand-v5b"
-    - nand-ecc-strength: see nand-controller.yaml for details. Valid values are:
-        8, 15      for "altr,socfpga-denali-nand"
-        8, 16, 24  for "socionext,uniphier-denali-nand-v5a"
-        8, 16      for "socionext,uniphier-denali-nand-v5b"
-    - nand-ecc-maximize: see nand-controller.yaml for details
-
-The chip nodes may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Examples:
-
-nand: nand@ff900000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "altr,socfpga-denali-nand";
-	reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
-	reg-names = "nand_data", "denali_reg";
-	clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
-	clock-names = "nand", "nand_x", "ecc";
-	resets = <&nand_rst>, <&nand_reg_rst>;
-	reset-names = "nand", "reg";
-	interrupts = <0 144 4>;
-
-	nand@0 {
-		reg = <0>;
-	}
-};