| Message ID | 20191114093950.4101-4-tomi.valkeinen@ti.com |
|---|---|
| State | Accepted |
| Commit | fb0629eeeedb6622c16da1aa76a4520daf9a46e2 |
| Headers | show |
| Series | None | expand |
Hi Thierry, On 02/12/2019 15:07, Laurent Pinchart wrote: > Hi Tomi, > > Thank you for the patch. > > On Thu, Nov 14, 2019 at 11:39:50AM +0200, Tomi Valkeinen wrote: >> The panel datasheet says that the panel samples at falling edge, but >> does not say anything about h/v sync signals. Testing shows that if the >> sync signals are driven on falling edge, the picture on the panel will >> be slightly shifted right. >> >> Setting sync drive edge to the same as data drive edge fixes this issue. >> >> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> > > I don't have access to the documentation, but this makes sense, so > > Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > >> --- >> drivers/gpu/drm/panel/panel-simple.c | 3 ++- >> 1 file changed, 2 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c >> index 5d487686d25c..0784536ae6af 100644 >> --- a/drivers/gpu/drm/panel/panel-simple.c >> +++ b/drivers/gpu/drm/panel/panel-simple.c >> @@ -2397,7 +2397,8 @@ static const struct panel_desc osddisplays_osd070t1718_19ts = { >> .height = 91, >> }, >> .bus_format = MEDIA_BUS_FMT_RGB888_1X24, >> - .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, >> + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE | >> + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, >> .connector_type = DRM_MODE_CONNECTOR_DPI, >> }; >> > Can you pick this one up? Tomi -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Thierry, On 02/12/2019 15:07, Laurent Pinchart wrote: > Hi Tomi, > > Thank you for the patch. > > On Thu, Nov 14, 2019 at 11:39:50AM +0200, Tomi Valkeinen wrote: >> The panel datasheet says that the panel samples at falling edge, but >> does not say anything about h/v sync signals. Testing shows that if the >> sync signals are driven on falling edge, the picture on the panel will >> be slightly shifted right. >> >> Setting sync drive edge to the same as data drive edge fixes this issue. >> >> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> > > I don't have access to the documentation, but this makes sense, so > > Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > >> --- >> drivers/gpu/drm/panel/panel-simple.c | 3 ++- >> 1 file changed, 2 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c >> index 5d487686d25c..0784536ae6af 100644 >> --- a/drivers/gpu/drm/panel/panel-simple.c >> +++ b/drivers/gpu/drm/panel/panel-simple.c >> @@ -2397,7 +2397,8 @@ static const struct panel_desc osddisplays_osd070t1718_19ts = { >> .height = 91, >> }, >> .bus_format = MEDIA_BUS_FMT_RGB888_1X24, >> - .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, >> + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE | >> + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, >> .connector_type = DRM_MODE_CONNECTOR_DPI, >> }; Can this be merged? Tomi -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Tomi. On Mon, Feb 10, 2020 at 10:15:33AM +0200, Tomi Valkeinen wrote: > Hi Thierry, > > On 02/12/2019 15:07, Laurent Pinchart wrote: > > Hi Tomi, > > > > Thank you for the patch. > > > > On Thu, Nov 14, 2019 at 11:39:50AM +0200, Tomi Valkeinen wrote: > > > The panel datasheet says that the panel samples at falling edge, but > > > does not say anything about h/v sync signals. Testing shows that if the > > > sync signals are driven on falling edge, the picture on the panel will > > > be slightly shifted right. > > > > > > Setting sync drive edge to the same as data drive edge fixes this issue. > > > > > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> > > > > I don't have access to the documentation, but this makes sense, so > > > > Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > --- > > > drivers/gpu/drm/panel/panel-simple.c | 3 ++- > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c > > > index 5d487686d25c..0784536ae6af 100644 > > > --- a/drivers/gpu/drm/panel/panel-simple.c > > > +++ b/drivers/gpu/drm/panel/panel-simple.c > > > @@ -2397,7 +2397,8 @@ static const struct panel_desc osddisplays_osd070t1718_19ts = { > > > .height = 91, > > > }, > > > .bus_format = MEDIA_BUS_FMT_RGB888_1X24, > > > - .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, > > > + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE | > > > + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, > > > .connector_type = DRM_MODE_CONNECTOR_DPI, > > > }; > > Can this be merged? I have lost the original mail. Can you re-send or provide a patchwork pointer or similar. Then I will apply. PS. Mail had been stuck in my spam quarantine so did not get it until now. Sam _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Sam, On 14/02/2020 23:39, Sam Ravnborg wrote: > Hi Tomi. > > On Mon, Feb 10, 2020 at 10:15:33AM +0200, Tomi Valkeinen wrote: >> Hi Thierry, >> >> On 02/12/2019 15:07, Laurent Pinchart wrote: >>> Hi Tomi, >>> >>> Thank you for the patch. >>> >>> On Thu, Nov 14, 2019 at 11:39:50AM +0200, Tomi Valkeinen wrote: >>>> The panel datasheet says that the panel samples at falling edge, but >>>> does not say anything about h/v sync signals. Testing shows that if the >>>> sync signals are driven on falling edge, the picture on the panel will >>>> be slightly shifted right. >>>> >>>> Setting sync drive edge to the same as data drive edge fixes this issue. >>>> >>>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> >>> >>> I don't have access to the documentation, but this makes sense, so >>> >>> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >>> >>>> --- >>>> drivers/gpu/drm/panel/panel-simple.c | 3 ++- >>>> 1 file changed, 2 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c >>>> index 5d487686d25c..0784536ae6af 100644 >>>> --- a/drivers/gpu/drm/panel/panel-simple.c >>>> +++ b/drivers/gpu/drm/panel/panel-simple.c >>>> @@ -2397,7 +2397,8 @@ static const struct panel_desc osddisplays_osd070t1718_19ts = { >>>> .height = 91, >>>> }, >>>> .bus_format = MEDIA_BUS_FMT_RGB888_1X24, >>>> - .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, >>>> + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE | >>>> + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, >>>> .connector_type = DRM_MODE_CONNECTOR_DPI, >>>> }; >> >> Can this be merged? > > I have lost the original mail. > Can you re-send or provide a patchwork pointer or similar. > Then I will apply. Here are lore and patchwork links. Note that the first two patches in the series have already been handled. https://lore.kernel.org/dri-devel/20191114093950.rT5m86Xh0-a9FZGq7JipQ3O3vldctJYcvRdhxUMGBVE@z/#t https://patchwork.freedesktop.org/series/69459/ Tomi -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Tomi. > >>>> +++ b/drivers/gpu/drm/panel/panel-simple.c > >>>> @@ -2397,7 +2397,8 @@ static const struct panel_desc osddisplays_osd070t1718_19ts = { > >>>> .height = 91, > >>>> }, > >>>> .bus_format = MEDIA_BUS_FMT_RGB888_1X24, > >>>> - .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, > >>>> + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE | > >>>> + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, > >>>> .connector_type = DRM_MODE_CONNECTOR_DPI, > >>>> }; > >> > >> Can this be merged? > > > > I have lost the original mail. > > Can you re-send or provide a patchwork pointer or similar. > > Then I will apply. > > Here are lore and patchwork links. Note that the first two patches in the series have already been handled. > > https://lore.kernel.org/dri-devel/20191114093950.rT5m86Xh0-a9FZGq7JipQ3O3vldctJYcvRdhxUMGBVE@z/#t > > https://patchwork.freedesktop.org/series/69459/ Thanks for the pointers. It is now applied to drm-misc-next. Sam _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 5d487686d25c..0784536ae6af 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2397,7 +2397,8 @@ static const struct panel_desc osddisplays_osd070t1718_19ts = { .height = 91, }, .bus_format = MEDIA_BUS_FMT_RGB888_1X24, - .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE | + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, .connector_type = DRM_MODE_CONNECTOR_DPI, };
The panel datasheet says that the panel samples at falling edge, but does not say anything about h/v sync signals. Testing shows that if the sync signals are driven on falling edge, the picture on the panel will be slightly shifted right. Setting sync drive edge to the same as data drive edge fixes this issue. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- drivers/gpu/drm/panel/panel-simple.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)