| Message ID | 20191028124238.19224-10-t-kristo@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | remoteproc: omap changes on top of v5.4-rc1 | expand |
On Mon 28 Oct 05:42 PDT 2019, Tero Kristo wrote: > From: Suman Anna <s-anna@ti.com> > > The following fields: .name, .oh_name, .oh_name_opt, .mbox_name, > .firmware, .ops and .set_bootaddr, are removed from the platform data, > as these are no longer needed after the addition of DT support to the > OMAP remoteproc driver. > > The .name field was used to give a name to the remoteproc, and this > is replaced with the device name. The .ops field was never used by > the OMAP remoteproc driver. The .mbox_name was used to define the > sub-mailbox node used for communication with the remote processor, > and is retrieved using the 'mboxes' property in the DT node. The > .firmware field is encoded directly in the OMAP remoteproc driver and > is retrieved using driver match data. The .set_bootaddr ops was used > for using a OMAP Control Module API to configure the boot address for > the processor, and is now implemented within the driver using a > syscon property. > > The .oh_name field is used to define the primary hwmod for the processor > node, and is represented using the 'ti,hwmods' property in the DT node. > The .oh_name_opt field was primarily defined to identify the hwmod for > the second cpu in a dual Cortex-M3/M4 IPU processor sub-system. This > hwmod entry is no longer defined usually, but rather a single hwmod > representing both the processors in the IPU sub-system is defined. > A single firmware image (either in SMP-mode or a combined image for > non-SMP mode) is used, with both the resets released together always > as part of the device management. Any power management and recovery > aspects require that both the processors be managed as one entity due > to the presence of shared MMU and unicache within the IPU sub-system. > > The OMAP remoteproc platform data structure is eventually expected > to be removed completely once the other dependencies with the > mach-omap layer are met. > > Signed-off-by: Suman Anna <s-anna@ti.com> > Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > include/linux/platform_data/remoteproc-omap.h | 17 +---------------- > 1 file changed, 1 insertion(+), 16 deletions(-) > > diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h > index 7e3a16097672..6bea01e199fe 100644 > --- a/include/linux/platform_data/remoteproc-omap.h > +++ b/include/linux/platform_data/remoteproc-omap.h > @@ -2,38 +2,23 @@ > /* > * Remote Processor - omap-specific bits > * > - * Copyright (C) 2011 Texas Instruments, Inc. > + * Copyright (C) 2011-2018 Texas Instruments Incorporated - http://www.ti.com/ > * Copyright (C) 2011 Google, Inc. > */ > > #ifndef _PLAT_REMOTEPROC_H > #define _PLAT_REMOTEPROC_H > > -struct rproc_ops; > struct platform_device; > > /* > * struct omap_rproc_pdata - omap remoteproc's platform data > - * @name: the remoteproc's name > - * @oh_name: omap hwmod device > - * @oh_name_opt: optional, secondary omap hwmod device > - * @firmware: name of firmware file to load > - * @mbox_name: name of omap mailbox device to use with this rproc > - * @ops: start/stop rproc handlers > * @device_enable: omap-specific handler for enabling a device > * @device_shutdown: omap-specific handler for shutting down a device > - * @set_bootaddr: omap-specific handler for setting the rproc boot address > */ > struct omap_rproc_pdata { > - const char *name; > - const char *oh_name; > - const char *oh_name_opt; > - const char *firmware; > - const char *mbox_name; > - const struct rproc_ops *ops; > int (*device_enable)(struct platform_device *pdev); > int (*device_shutdown)(struct platform_device *pdev); > - void (*set_bootaddr)(u32); > }; > > #if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE) > -- > 2.17.1 > > -- > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h index 7e3a16097672..6bea01e199fe 100644 --- a/include/linux/platform_data/remoteproc-omap.h +++ b/include/linux/platform_data/remoteproc-omap.h @@ -2,38 +2,23 @@ /* * Remote Processor - omap-specific bits * - * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011-2018 Texas Instruments Incorporated - http://www.ti.com/ * Copyright (C) 2011 Google, Inc. */ #ifndef _PLAT_REMOTEPROC_H #define _PLAT_REMOTEPROC_H -struct rproc_ops; struct platform_device; /* * struct omap_rproc_pdata - omap remoteproc's platform data - * @name: the remoteproc's name - * @oh_name: omap hwmod device - * @oh_name_opt: optional, secondary omap hwmod device - * @firmware: name of firmware file to load - * @mbox_name: name of omap mailbox device to use with this rproc - * @ops: start/stop rproc handlers * @device_enable: omap-specific handler for enabling a device * @device_shutdown: omap-specific handler for shutting down a device - * @set_bootaddr: omap-specific handler for setting the rproc boot address */ struct omap_rproc_pdata { - const char *name; - const char *oh_name; - const char *oh_name_opt; - const char *firmware; - const char *mbox_name; - const struct rproc_ops *ops; int (*device_enable)(struct platform_device *pdev); int (*device_shutdown)(struct platform_device *pdev); - void (*set_bootaddr)(u32); }; #if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)