Message ID | 1572527274-21925-1-git-send-email-sumit.garg@linaro.org |
---|---|
State | Superseded |
Headers | show |
Series | tee: optee: Fix dynamic shm pool allocations | expand |
Hi Sumit, On Thu, Oct 31, 2019 at 06:37:54PM +0530, Sumit Garg wrote: > In case of dynamic shared memory pool, kernel memory allocated using > dmabuf_mgr pool needs to be registered with OP-TEE prior to its usage > during optee_open_session() or optee_invoke_func(). > > So fix dmabuf_mgr pool allocations via an additional call to > optee_shm_register(). > > Fixes: 9733b072a12a ("optee: allow to work without static shared memory") > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Looks good, I'm picking this up. Etienne told me has tested this on some of his hardware so I'll add: Tested-by: Etienne Carriere <etienne.carriere@linaro.org> Thanks, Jens > --- > > Depends on patch: https://lkml.org/lkml/2019/7/30/506 that adds support > to allow registration of kernel buffers with OP-TEE. > > drivers/tee/optee/shm_pool.c | 12 +++++++++++- > 1 file changed, 11 insertions(+), 1 deletion(-) > > diff --git a/drivers/tee/optee/shm_pool.c b/drivers/tee/optee/shm_pool.c > index de1d9b8..0332a53 100644 > --- a/drivers/tee/optee/shm_pool.c > +++ b/drivers/tee/optee/shm_pool.c > @@ -17,6 +17,7 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, > { > unsigned int order = get_order(size); > struct page *page; > + int rc = 0; > > page = alloc_pages(GFP_KERNEL | __GFP_ZERO, order); > if (!page) > @@ -26,12 +27,21 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, > shm->paddr = page_to_phys(page); > shm->size = PAGE_SIZE << order; > > - return 0; > + if (shm->flags & TEE_SHM_DMA_BUF) { > + shm->flags |= TEE_SHM_REGISTER; > + rc = optee_shm_register(shm->ctx, shm, &page, 1 << order, > + (unsigned long)shm->kaddr); > + } > + > + return rc; > } > > static void pool_op_free(struct tee_shm_pool_mgr *poolm, > struct tee_shm *shm) > { > + if (shm->flags & TEE_SHM_DMA_BUF) > + optee_shm_unregister(shm->ctx, shm); > + > free_pages((unsigned long)shm->kaddr, get_order(shm->size)); > shm->kaddr = NULL; > } > -- > 2.7.4 >
Hi Jens, On Thu, 7 Nov 2019 at 16:36, Jens Wiklander <jens.wiklander@linaro.org> wrote: > > Hi Sumit, > > On Thu, Oct 31, 2019 at 06:37:54PM +0530, Sumit Garg wrote: > > In case of dynamic shared memory pool, kernel memory allocated using > > dmabuf_mgr pool needs to be registered with OP-TEE prior to its usage > > during optee_open_session() or optee_invoke_func(). > > > > So fix dmabuf_mgr pool allocations via an additional call to > > optee_shm_register(). > > > > Fixes: 9733b072a12a ("optee: allow to work without static shared memory") > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > Looks good, I'm picking this up. Etienne told me has tested this on some > of his hardware so I'll add: > Tested-by: Etienne Carriere <etienne.carriere@linaro.org> > Thanks for picking this up. > > > --- > > > > Depends on patch: https://lkml.org/lkml/2019/7/30/506 that adds support > > to allow registration of kernel buffers with OP-TEE. You also need to pick up the dependency patch too. The latest v3 of this patch is here [1] although its unchanged from v2. Also, If you pick that up I will drop it from future revisions of Trusted Keys patchset [2]. [1] https://lkml.org/lkml/2019/10/31/431 [2] https://lkml.org/lkml/2019/10/31/430 -Sumit > > > > drivers/tee/optee/shm_pool.c | 12 +++++++++++- > > 1 file changed, 11 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/tee/optee/shm_pool.c b/drivers/tee/optee/shm_pool.c > > index de1d9b8..0332a53 100644 > > --- a/drivers/tee/optee/shm_pool.c > > +++ b/drivers/tee/optee/shm_pool.c > > @@ -17,6 +17,7 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, > > { > > unsigned int order = get_order(size); > > struct page *page; > > + int rc = 0; > > > > page = alloc_pages(GFP_KERNEL | __GFP_ZERO, order); > > if (!page) > > @@ -26,12 +27,21 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, > > shm->paddr = page_to_phys(page); > > shm->size = PAGE_SIZE << order; > > > > - return 0; > > + if (shm->flags & TEE_SHM_DMA_BUF) { > > + shm->flags |= TEE_SHM_REGISTER; > > + rc = optee_shm_register(shm->ctx, shm, &page, 1 << order, > > + (unsigned long)shm->kaddr); > > + } > > + > > + return rc; > > } > > > > static void pool_op_free(struct tee_shm_pool_mgr *poolm, > > struct tee_shm *shm) > > { > > + if (shm->flags & TEE_SHM_DMA_BUF) > > + optee_shm_unregister(shm->ctx, shm); > > + > > free_pages((unsigned long)shm->kaddr, get_order(shm->size)); > > shm->kaddr = NULL; > > } > > -- > > 2.7.4 > >
Hi Sumit, On Thu, Nov 7, 2019 at 1:41 PM Sumit Garg <sumit.garg@linaro.org> wrote: > > Hi Jens, > > On Thu, 7 Nov 2019 at 16:36, Jens Wiklander <jens.wiklander@linaro.org> wrote: > > > > Hi Sumit, > > > > On Thu, Oct 31, 2019 at 06:37:54PM +0530, Sumit Garg wrote: > > > In case of dynamic shared memory pool, kernel memory allocated using > > > dmabuf_mgr pool needs to be registered with OP-TEE prior to its usage > > > during optee_open_session() or optee_invoke_func(). > > > > > > So fix dmabuf_mgr pool allocations via an additional call to > > > optee_shm_register(). > > > > > > Fixes: 9733b072a12a ("optee: allow to work without static shared memory") > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > Looks good, I'm picking this up. Etienne told me has tested this on some > > of his hardware so I'll add: > > Tested-by: Etienne Carriere <etienne.carriere@linaro.org> > > > > Thanks for picking this up. > > > > > > --- > > > > > > Depends on patch: https://lkml.org/lkml/2019/7/30/506 that adds support > > > to allow registration of kernel buffers with OP-TEE. > > You also need to pick up the dependency patch too. The latest v3 of > this patch is here [1] although its unchanged from v2. Also, If you > pick that up I will drop it from future revisions of Trusted Keys > patchset [2]. > > [1] https://lkml.org/lkml/2019/10/31/431 > [2] https://lkml.org/lkml/2019/10/31/430 So I missed taking [1] into account. I think that it would make more sense to merge this patch ("tee: optee: Fix dynamic shm pool allocations") with [1] ("tee: optee: allow kernel pages to register as shm") into a new patch. Cheers, Jens > > -Sumit > > > > > > > drivers/tee/optee/shm_pool.c | 12 +++++++++++- > > > 1 file changed, 11 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/tee/optee/shm_pool.c b/drivers/tee/optee/shm_pool.c > > > index de1d9b8..0332a53 100644 > > > --- a/drivers/tee/optee/shm_pool.c > > > +++ b/drivers/tee/optee/shm_pool.c > > > @@ -17,6 +17,7 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, > > > { > > > unsigned int order = get_order(size); > > > struct page *page; > > > + int rc = 0; > > > > > > page = alloc_pages(GFP_KERNEL | __GFP_ZERO, order); > > > if (!page) > > > @@ -26,12 +27,21 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, > > > shm->paddr = page_to_phys(page); > > > shm->size = PAGE_SIZE << order; > > > > > > - return 0; > > > + if (shm->flags & TEE_SHM_DMA_BUF) { > > > + shm->flags |= TEE_SHM_REGISTER; > > > + rc = optee_shm_register(shm->ctx, shm, &page, 1 << order, > > > + (unsigned long)shm->kaddr); > > > + } > > > + > > > + return rc; > > > } > > > > > > static void pool_op_free(struct tee_shm_pool_mgr *poolm, > > > struct tee_shm *shm) > > > { > > > + if (shm->flags & TEE_SHM_DMA_BUF) > > > + optee_shm_unregister(shm->ctx, shm); > > > + > > > free_pages((unsigned long)shm->kaddr, get_order(shm->size)); > > > shm->kaddr = NULL; > > > } > > > -- > > > 2.7.4 > > >
Hi Jens, On Fri, 8 Nov 2019 at 16:09, Jens Wiklander <jens.wiklander@linaro.org> wrote: > > Hi Sumit, > > On Thu, Nov 7, 2019 at 1:41 PM Sumit Garg <sumit.garg@linaro.org> wrote: > > > > Hi Jens, > > > > On Thu, 7 Nov 2019 at 16:36, Jens Wiklander <jens.wiklander@linaro.org> wrote: > > > > > > Hi Sumit, > > > > > > On Thu, Oct 31, 2019 at 06:37:54PM +0530, Sumit Garg wrote: > > > > In case of dynamic shared memory pool, kernel memory allocated using > > > > dmabuf_mgr pool needs to be registered with OP-TEE prior to its usage > > > > during optee_open_session() or optee_invoke_func(). > > > > > > > > So fix dmabuf_mgr pool allocations via an additional call to > > > > optee_shm_register(). > > > > > > > > Fixes: 9733b072a12a ("optee: allow to work without static shared memory") > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > > > Looks good, I'm picking this up. Etienne told me has tested this on some > > > of his hardware so I'll add: > > > Tested-by: Etienne Carriere <etienne.carriere@linaro.org> > > > > > > > Thanks for picking this up. > > > > > > > > > --- > > > > > > > > Depends on patch: https://lkml.org/lkml/2019/7/30/506 that adds support > > > > to allow registration of kernel buffers with OP-TEE. > > > > You also need to pick up the dependency patch too. The latest v3 of > > this patch is here [1] although its unchanged from v2. Also, If you > > pick that up I will drop it from future revisions of Trusted Keys > > patchset [2]. > > > > [1] https://lkml.org/lkml/2019/10/31/431 > > [2] https://lkml.org/lkml/2019/10/31/430 > > So I missed taking [1] into account. I think that it would make more > sense to merge this patch ("tee: optee: Fix dynamic shm pool > allocations") with [1] ("tee: optee: allow kernel pages to register as > shm") into a new patch. Sure, will send v2 as merged patch instead. -Sumit > Cheers, > Jens > > > > > -Sumit > > > > > > > > > > drivers/tee/optee/shm_pool.c | 12 +++++++++++- > > > > 1 file changed, 11 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/drivers/tee/optee/shm_pool.c b/drivers/tee/optee/shm_pool.c > > > > index de1d9b8..0332a53 100644 > > > > --- a/drivers/tee/optee/shm_pool.c > > > > +++ b/drivers/tee/optee/shm_pool.c > > > > @@ -17,6 +17,7 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, > > > > { > > > > unsigned int order = get_order(size); > > > > struct page *page; > > > > + int rc = 0; > > > > > > > > page = alloc_pages(GFP_KERNEL | __GFP_ZERO, order); > > > > if (!page) > > > > @@ -26,12 +27,21 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, > > > > shm->paddr = page_to_phys(page); > > > > shm->size = PAGE_SIZE << order; > > > > > > > > - return 0; > > > > + if (shm->flags & TEE_SHM_DMA_BUF) { > > > > + shm->flags |= TEE_SHM_REGISTER; > > > > + rc = optee_shm_register(shm->ctx, shm, &page, 1 << order, > > > > + (unsigned long)shm->kaddr); > > > > + } > > > > + > > > > + return rc; > > > > } > > > > > > > > static void pool_op_free(struct tee_shm_pool_mgr *poolm, > > > > struct tee_shm *shm) > > > > { > > > > + if (shm->flags & TEE_SHM_DMA_BUF) > > > > + optee_shm_unregister(shm->ctx, shm); > > > > + > > > > free_pages((unsigned long)shm->kaddr, get_order(shm->size)); > > > > shm->kaddr = NULL; > > > > } > > > > -- > > > > 2.7.4 > > > >
diff --git a/drivers/tee/optee/shm_pool.c b/drivers/tee/optee/shm_pool.c index de1d9b8..0332a53 100644 --- a/drivers/tee/optee/shm_pool.c +++ b/drivers/tee/optee/shm_pool.c @@ -17,6 +17,7 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, { unsigned int order = get_order(size); struct page *page; + int rc = 0; page = alloc_pages(GFP_KERNEL | __GFP_ZERO, order); if (!page) @@ -26,12 +27,21 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, shm->paddr = page_to_phys(page); shm->size = PAGE_SIZE << order; - return 0; + if (shm->flags & TEE_SHM_DMA_BUF) { + shm->flags |= TEE_SHM_REGISTER; + rc = optee_shm_register(shm->ctx, shm, &page, 1 << order, + (unsigned long)shm->kaddr); + } + + return rc; } static void pool_op_free(struct tee_shm_pool_mgr *poolm, struct tee_shm *shm) { + if (shm->flags & TEE_SHM_DMA_BUF) + optee_shm_unregister(shm->ctx, shm); + free_pages((unsigned long)shm->kaddr, get_order(shm->size)); shm->kaddr = NULL; }
In case of dynamic shared memory pool, kernel memory allocated using dmabuf_mgr pool needs to be registered with OP-TEE prior to its usage during optee_open_session() or optee_invoke_func(). So fix dmabuf_mgr pool allocations via an additional call to optee_shm_register(). Fixes: 9733b072a12a ("optee: allow to work without static shared memory") Signed-off-by: Sumit Garg <sumit.garg@linaro.org> --- Depends on patch: https://lkml.org/lkml/2019/7/30/506 that adds support to allow registration of kernel buffers with OP-TEE. drivers/tee/optee/shm_pool.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) -- 2.7.4