| Message ID | 20191105075907.22804-1-hemant.agrawal@nxp.com |
|---|---|
| State | Accepted |
| Commit | 788a3b5e0bde887f095a4848a31fc9ccb7058d41 |
| Headers | show |
| Series | [v2,1/2] config: remove redundant dpaa2 build | expand |
On Tue, Nov 5, 2019 at 9:05 AM Hemant Agrawal <hemant.agrawal@nxp.com> wrote: > > dpaa and dpaa2 config have evolved to be same. The same binary > can now work across the platforms. So, there is no need to maintain > two different build configs. > The dpaa config shall work for both generation of dpaa platforms. > > Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> > --- > config/arm/arm64_dpaa2_linux_gcc | 16 -------- > config/arm/meson.build | 7 ---- > config/defconfig_arm64-dpaa-linuxapp-gcc | 16 ++++++-- > config/defconfig_arm64-dpaa2-linux-gcc | 1 - > config/defconfig_arm64-dpaa2-linuxapp-gcc | 22 ----------- > doc/guides/cryptodevs/dpaa2_sec.rst | 4 +- > doc/guides/eventdevs/dpaa2.rst | 2 +- > .../linux_gsg/cross_build_dpdk_for_arm64.rst | 2 +- > doc/guides/nics/build_and_test.rst | 2 +- > doc/guides/nics/dpaa.rst | 12 +----- > doc/guides/nics/dpaa2.rst | 8 ++-- > doc/guides/rawdevs/dpaa2_cmdif.rst | 2 +- > doc/guides/rawdevs/dpaa2_qdma.rst | 2 +- > doc/guides/rel_notes/release_19_11.rst | 3 ++ > mk/machine/dpaa2/rte.vars.mk | 37 ------------------- > 15 files changed, 27 insertions(+), 109 deletions(-) > delete mode 100644 config/arm/arm64_dpaa2_linux_gcc > delete mode 120000 config/defconfig_arm64-dpaa2-linux-gcc > delete mode 100644 config/defconfig_arm64-dpaa2-linuxapp-gcc > delete mode 100644 mk/machine/dpaa2/rte.vars.mk > > diff --git a/config/arm/arm64_dpaa2_linux_gcc b/config/arm/arm64_dpaa2_linux_gcc > deleted file mode 100644 > index 0df8c8f7d..000000000 > --- a/config/arm/arm64_dpaa2_linux_gcc > +++ /dev/null > @@ -1,16 +0,0 @@ > -[binaries] > -c = 'aarch64-linux-gnu-gcc' > -cpp = 'aarch64-linux-gnu-cpp' > -ar = 'aarch64-linux-gnu-ar' > -as = 'aarch64-linux-gnu-as' > -strip = 'aarch64-linux-gnu-strip' > -pcap-config = '' > - > -[host_machine] > -system = 'linux' > -cpu_family = 'aarch64' > -cpu = 'armv8-a' > -endian = 'little' > - > -[properties] > -implementor_id = 'dpaa2' > diff --git a/config/arm/meson.build b/config/arm/meson.build > index d9f9811f7..46dff3a69 100644 > --- a/config/arm/meson.build > +++ b/config/arm/meson.build > @@ -48,12 +48,6 @@ flags_dpaa = [ > ['RTE_USE_C11_MEM_MODEL', true], > ['RTE_CACHE_LINE_SIZE', 64], > ['RTE_MAX_NUMA_NODES', 1], > - ['RTE_MAX_LCORE', 16]] > -flags_dpaa2 = [ > - ['RTE_MACHINE', '"dpaa2"'], > - ['RTE_USE_C11_MEM_MODEL', true], > - ['RTE_CACHE_LINE_SIZE', 64], > - ['RTE_MAX_NUMA_NODES', 1], > ['RTE_MAX_LCORE', 16], > ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]] > flags_armada = [ > @@ -115,7 +109,6 @@ impl_0x53 = ['Samsung', flags_generic, machine_args_generic] > impl_0x56 = ['Marvell ARMADA', flags_armada, machine_args_generic] > impl_0x69 = ['Intel', flags_generic, machine_args_generic] > impl_dpaa = ['NXP DPAA', flags_dpaa, machine_args_generic] > -impl_dpaa2 = ['NXP DPAA2', flags_dpaa2, machine_args_generic] > > dpdk_conf.set('RTE_FORCE_INTRINSICS', 1) > > diff --git a/config/defconfig_arm64-dpaa-linuxapp-gcc b/config/defconfig_arm64-dpaa-linuxapp-gcc > index 19614fb01..4ae4cd850 100644 > --- a/config/defconfig_arm64-dpaa-linuxapp-gcc > +++ b/config/defconfig_arm64-dpaa-linuxapp-gcc > @@ -1,14 +1,15 @@ > # SPDX-License-Identifier: BSD-3-Clause > # Copyright 2016 Freescale Semiconductor, Inc. > -# Copyright 2017 NXP > +# Copyright 2017-2019 NXP > > #include "defconfig_arm64-armv8a-linux-gcc" > > -# NXP (Freescale) - Soc Architecture with FMAN, QMAN & BMAN support > +# NXP (Freescale) - Soc Architecture for DPAA or DPAA2 support > +# DPAA - FMAN, QMAN & BMAN support (e.g. LS1043, LS1046) > +# DPAA2 - WRIOP and QBMAN (e.g. LS1088, LS2088, LX2160 etc) > +# > CONFIG_RTE_MACHINE="dpaa" > CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72" > -CONFIG_RTE_LIBRTE_VHOST_NUMA=n > -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n > > # > # Compile Environment Abstraction Layer > @@ -18,6 +19,13 @@ CONFIG_RTE_MAX_NUMA_NODES=1 > CONFIG_RTE_CACHE_LINE_SIZE=64 > CONFIG_RTE_PKTMBUF_HEADROOM=128 > > +# Doesn't support NUMA > +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n > +CONFIG_RTE_LIBRTE_VHOST_NUMA=n > + > +# Enable PHY mode when using VM-VFIO target > +CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n > + > # NXP DPAA Bus > CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER=n > CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n > diff --git a/config/defconfig_arm64-dpaa2-linux-gcc b/config/defconfig_arm64-dpaa2-linux-gcc > deleted file mode 120000 > index 9a6c6c4cb..000000000 > --- a/config/defconfig_arm64-dpaa2-linux-gcc > +++ /dev/null > @@ -1 +0,0 @@ > -defconfig_arm64-dpaa2-linuxapp-gcc > \ No newline at end of file > diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc > deleted file mode 100644 > index 8b545f5f7..000000000 > --- a/config/defconfig_arm64-dpaa2-linuxapp-gcc > +++ /dev/null > @@ -1,22 +0,0 @@ > -# SPDX-License-Identifier: BSD-3-Clause > -# Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved. > -# Copyright 2016 NXP > -# > - > -#include "defconfig_arm64-armv8a-linux-gcc" > - > -# NXP (Freescale) - Soc Architecture with WRIOP and QBMAN support > -CONFIG_RTE_MACHINE="dpaa2" > -CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72" > - > -CONFIG_RTE_MAX_LCORE=16 > -CONFIG_RTE_MAX_NUMA_NODES=1 > -CONFIG_RTE_CACHE_LINE_SIZE=64 > - > -CONFIG_RTE_PKTMBUF_HEADROOM=128 > - > -# Doesn't support NUMA > -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n > -CONFIG_RTE_LIBRTE_VHOST_NUMA=n > - > -CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n > diff --git a/doc/guides/cryptodevs/dpaa2_sec.rst b/doc/guides/cryptodevs/dpaa2_sec.rst > index 9e21d3169..55f0d6856 100644 > --- a/doc/guides/cryptodevs/dpaa2_sec.rst > +++ b/doc/guides/cryptodevs/dpaa2_sec.rst > @@ -180,7 +180,7 @@ to enable DPAA2_SEC PMD. > Please note that enabling debugging options may affect system performance. > > * ``CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC`` (default ``n``) > - By default it is only enabled in defconfig_arm64-dpaa2-* config. > + By default it is only enabled in defconfig_arm64-dpaa-* config. > Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver. > > Installations > @@ -191,7 +191,7 @@ following ``make`` command: > .. code-block:: console > > cd <DPDK-source-directory> > - make config T=arm64-dpaa2-linux-gcc install > + make config T=arm64-dpaa-linux-gcc install > > Enabling logs > ------------- > diff --git a/doc/guides/eventdevs/dpaa2.rst b/doc/guides/eventdevs/dpaa2.rst > index a24a43c15..dd8ebbcd0 100644 > --- a/doc/guides/eventdevs/dpaa2.rst > +++ b/doc/guides/eventdevs/dpaa2.rst > @@ -71,7 +71,7 @@ following ``make`` command: > .. code-block:: console > > cd <DPDK-source-directory> > - make config T=arm64-dpaa2-linux-gcc install > + make config T=arm64-dpaa-linux-gcc install > > Initialization > -------------- > diff --git a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst > index 28a8e0920..e799b0ba4 100644 > --- a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst > +++ b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst > @@ -79,7 +79,7 @@ Copy the NUMA header files and lib to the cross compiler's directories: > > Configure and cross compile DPDK Build > -------------------------------------- > -To configure a build, choose one of the target configurations, like arm64-dpaa2-linux-gcc and arm64-thunderx-linux-gcc. > +To configure a build, choose one of the target configurations, like arm64-dpaa-linux-gcc and arm64-thunderx-linux-gcc. > > .. code-block:: console > > diff --git a/doc/guides/nics/build_and_test.rst b/doc/guides/nics/build_and_test.rst > index aae5c111d..f99e019ff 100644 > --- a/doc/guides/nics/build_and_test.rst > +++ b/doc/guides/nics/build_and_test.rst > @@ -35,7 +35,7 @@ Example output: > > arm-armv7a-linux-gcc > arm64-armv8a-linux-gcc > - arm64-dpaa2-linux-gcc > + arm64-dpaa-linux-gcc > arm64-thunderx-linux-gcc > arm64-xgene1-linux-gcc > i686-native-linux-gcc > diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst > index f85920012..17839a920 100644 > --- a/doc/guides/nics/dpaa.rst > +++ b/doc/guides/nics/dpaa.rst > @@ -201,14 +201,12 @@ Config File Options > The following options can be modified in the ``config`` file. > Please note that enabling debugging options may affect system performance. > > -- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``n``) > +- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``y``) > > - By default it is enabled only for defconfig_arm64-dpaa-* config. > Toggle compilation of the ``librte_bus_dpaa`` driver. > > -- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``n``) > +- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``y``) > > - By default it is enabled only for defconfig_arm64-dpaa-* config. > Toggle compilation of the ``librte_pmd_dpaa`` driver. > > - ``CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER`` (default ``n``) > @@ -222,12 +220,6 @@ Please note that enabling debugging options may affect system performance. > Enables debugging of the Queue and Buffer Manager layer which interacts > with the DPAA hardware. > > -- ``CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS`` (default ``dpaa``) > - > - This is not a DPAA specific configuration - it is a generic RTE config. > - For optimal performance and hardware utilization, it is expected that DPAA > - Mempool driver is used for mempools. For that, this configuration needs to > - enabled. > > Environment Variables > ~~~~~~~~~~~~~~~~~~~~~ > diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst > index 99e4c8d72..b6d9e2129 100644 > --- a/doc/guides/nics/dpaa2.rst > +++ b/doc/guides/nics/dpaa2.rst > @@ -441,21 +441,19 @@ Config File Options > The following options can be modified in the ``config`` file. > Please note that enabling debugging options may affect system performance. > > -- ``CONFIG_RTE_LIBRTE_FSLMC_BUS`` (default ``n``) > +- ``CONFIG_RTE_LIBRTE_FSLMC_BUS`` (default ``y``) > > - By default it is enabled only for defconfig_arm64-dpaa2-* config. > Toggle compilation of the ``librte_bus_fslmc`` driver. > > -- ``CONFIG_RTE_LIBRTE_DPAA2_PMD`` (default ``n``) > +- ``CONFIG_RTE_LIBRTE_DPAA2_PMD`` (default ``y``) > > - By default it is enabled only for defconfig_arm64-dpaa2-* config. > Toggle compilation of the ``librte_pmd_dpaa2`` driver. > > - ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``) > > Toggle display of debugging messages/logic > > -- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``y``) > +- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``n``) > > Toggle to use physical address vs virtual address for hardware accelerators. > > diff --git a/doc/guides/rawdevs/dpaa2_cmdif.rst b/doc/guides/rawdevs/dpaa2_cmdif.rst > index ac5f0f137..bcd603c81 100644 > --- a/doc/guides/rawdevs/dpaa2_cmdif.rst > +++ b/doc/guides/rawdevs/dpaa2_cmdif.rst > @@ -77,7 +77,7 @@ following ``make`` command: > .. code-block:: console > > cd <DPDK-source-directory> > - make config T=arm64-dpaa2-linux-gcc install > + make config T=arm64-dpaa-linux-gcc install > > Initialization > -------------- > diff --git a/doc/guides/rawdevs/dpaa2_qdma.rst b/doc/guides/rawdevs/dpaa2_qdma.rst > index 1550ca5ba..a5085c2c0 100644 > --- a/doc/guides/rawdevs/dpaa2_qdma.rst > +++ b/doc/guides/rawdevs/dpaa2_qdma.rst > @@ -81,7 +81,7 @@ following ``make`` command: > .. code-block:: console > > cd <DPDK-source-directory> > - make config T=arm64-dpaa2-linux-gcc install > + make config T=arm64-dpaa-linux-gcc install > > Initialization > -------------- > diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst > index ae8e7b2f0..c9a135655 100644 > --- a/doc/guides/rel_notes/release_19_11.rst > +++ b/doc/guides/rel_notes/release_19_11.rst > @@ -267,6 +267,9 @@ Removed Items > * Quota and Watermark > * vhost-scsi > > +* Removed arm64-dpaa2-* build config. arm64-dpaa-* can now build for both > + dpaa and dpaa2 platforms. > + > > API Changes > ----------- > diff --git a/mk/machine/dpaa2/rte.vars.mk b/mk/machine/dpaa2/rte.vars.mk > deleted file mode 100644 > index aaa03c424..000000000 > --- a/mk/machine/dpaa2/rte.vars.mk > +++ /dev/null > @@ -1,37 +0,0 @@ > -# SPDX-License-Identifier: BSD-3-Clause > -# Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved. > -# Copyright 2016 NXP > - > -# > -# machine: > -# > -# - can define ARCH variable (overridden by cmdline value) > -# - can define CROSS variable (overridden by cmdline value) > -# - define MACHINE_CFLAGS variable (overridden by cmdline value) > -# - define MACHINE_LDFLAGS variable (overridden by cmdline value) > -# - define MACHINE_ASFLAGS variable (overridden by cmdline value) > -# - can define CPU_CFLAGS variable (overridden by cmdline value) that > -# overrides the one defined in arch. > -# - can define CPU_LDFLAGS variable (overridden by cmdline value) that > -# overrides the one defined in arch. > -# - can define CPU_ASFLAGS variable (overridden by cmdline value) that > -# overrides the one defined in arch. > -# - may override any previously defined variable > -# > - > -# ARCH = > -# CROSS = > -# MACHINE_CFLAGS = > -# MACHINE_LDFLAGS = > -# MACHINE_ASFLAGS = > -# CPU_CFLAGS = > -# CPU_LDFLAGS = > -# CPU_ASFLAGS = > -MACHINE_CFLAGS += -march=armv8-a+crc > - > -ifdef CONFIG_RTE_ARCH_ARM_TUNE > -MACHINE_CFLAGS += -mtune=$(CONFIG_RTE_ARCH_ARM_TUNE:"%"=%) > -endif > - > -# To avoid TLS corruption issue. > -MACHINE_CFLAGS += -mtls-dialect=trad > -- > 2.17.1 > Reviewed-by: David Marchand <david.marchand@redhat.com> -- David Marchand
On Tue, Nov 5, 2019 at 10:17 AM David Marchand <david.marchand@redhat.com> wrote: > On Tue, Nov 5, 2019 at 9:05 AM Hemant Agrawal <hemant.agrawal@nxp.com> wrote: > > > > dpaa and dpaa2 config have evolved to be same. The same binary > > can now work across the platforms. So, there is no need to maintain > > two different build configs. > > The dpaa config shall work for both generation of dpaa platforms. > > > > Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> > Reviewed-by: David Marchand <david.marchand@redhat.com> > Applied, thanks. -- David Marchand
diff --git a/config/arm/arm64_dpaa2_linux_gcc b/config/arm/arm64_dpaa2_linux_gcc deleted file mode 100644 index 0df8c8f7d..000000000 --- a/config/arm/arm64_dpaa2_linux_gcc +++ /dev/null @@ -1,16 +0,0 @@ -[binaries] -c = 'aarch64-linux-gnu-gcc' -cpp = 'aarch64-linux-gnu-cpp' -ar = 'aarch64-linux-gnu-ar' -as = 'aarch64-linux-gnu-as' -strip = 'aarch64-linux-gnu-strip' -pcap-config = '' - -[host_machine] -system = 'linux' -cpu_family = 'aarch64' -cpu = 'armv8-a' -endian = 'little' - -[properties] -implementor_id = 'dpaa2' diff --git a/config/arm/meson.build b/config/arm/meson.build index d9f9811f7..46dff3a69 100644 --- a/config/arm/meson.build +++ b/config/arm/meson.build @@ -48,12 +48,6 @@ flags_dpaa = [ ['RTE_USE_C11_MEM_MODEL', true], ['RTE_CACHE_LINE_SIZE', 64], ['RTE_MAX_NUMA_NODES', 1], - ['RTE_MAX_LCORE', 16]] -flags_dpaa2 = [ - ['RTE_MACHINE', '"dpaa2"'], - ['RTE_USE_C11_MEM_MODEL', true], - ['RTE_CACHE_LINE_SIZE', 64], - ['RTE_MAX_NUMA_NODES', 1], ['RTE_MAX_LCORE', 16], ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]] flags_armada = [ @@ -115,7 +109,6 @@ impl_0x53 = ['Samsung', flags_generic, machine_args_generic] impl_0x56 = ['Marvell ARMADA', flags_armada, machine_args_generic] impl_0x69 = ['Intel', flags_generic, machine_args_generic] impl_dpaa = ['NXP DPAA', flags_dpaa, machine_args_generic] -impl_dpaa2 = ['NXP DPAA2', flags_dpaa2, machine_args_generic] dpdk_conf.set('RTE_FORCE_INTRINSICS', 1) diff --git a/config/defconfig_arm64-dpaa-linuxapp-gcc b/config/defconfig_arm64-dpaa-linuxapp-gcc index 19614fb01..4ae4cd850 100644 --- a/config/defconfig_arm64-dpaa-linuxapp-gcc +++ b/config/defconfig_arm64-dpaa-linuxapp-gcc @@ -1,14 +1,15 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright 2016 Freescale Semiconductor, Inc. -# Copyright 2017 NXP +# Copyright 2017-2019 NXP #include "defconfig_arm64-armv8a-linux-gcc" -# NXP (Freescale) - Soc Architecture with FMAN, QMAN & BMAN support +# NXP (Freescale) - Soc Architecture for DPAA or DPAA2 support +# DPAA - FMAN, QMAN & BMAN support (e.g. LS1043, LS1046) +# DPAA2 - WRIOP and QBMAN (e.g. LS1088, LS2088, LX2160 etc) +# CONFIG_RTE_MACHINE="dpaa" CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72" -CONFIG_RTE_LIBRTE_VHOST_NUMA=n -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n # # Compile Environment Abstraction Layer @@ -18,6 +19,13 @@ CONFIG_RTE_MAX_NUMA_NODES=1 CONFIG_RTE_CACHE_LINE_SIZE=64 CONFIG_RTE_PKTMBUF_HEADROOM=128 +# Doesn't support NUMA +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n +CONFIG_RTE_LIBRTE_VHOST_NUMA=n + +# Enable PHY mode when using VM-VFIO target +CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n + # NXP DPAA Bus CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n diff --git a/config/defconfig_arm64-dpaa2-linux-gcc b/config/defconfig_arm64-dpaa2-linux-gcc deleted file mode 120000 index 9a6c6c4cb..000000000 --- a/config/defconfig_arm64-dpaa2-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-dpaa2-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc deleted file mode 100644 index 8b545f5f7..000000000 --- a/config/defconfig_arm64-dpaa2-linuxapp-gcc +++ /dev/null @@ -1,22 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved. -# Copyright 2016 NXP -# - -#include "defconfig_arm64-armv8a-linux-gcc" - -# NXP (Freescale) - Soc Architecture with WRIOP and QBMAN support -CONFIG_RTE_MACHINE="dpaa2" -CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72" - -CONFIG_RTE_MAX_LCORE=16 -CONFIG_RTE_MAX_NUMA_NODES=1 -CONFIG_RTE_CACHE_LINE_SIZE=64 - -CONFIG_RTE_PKTMBUF_HEADROOM=128 - -# Doesn't support NUMA -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n -CONFIG_RTE_LIBRTE_VHOST_NUMA=n - -CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n diff --git a/doc/guides/cryptodevs/dpaa2_sec.rst b/doc/guides/cryptodevs/dpaa2_sec.rst index 9e21d3169..55f0d6856 100644 --- a/doc/guides/cryptodevs/dpaa2_sec.rst +++ b/doc/guides/cryptodevs/dpaa2_sec.rst @@ -180,7 +180,7 @@ to enable DPAA2_SEC PMD. Please note that enabling debugging options may affect system performance. * ``CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC`` (default ``n``) - By default it is only enabled in defconfig_arm64-dpaa2-* config. + By default it is only enabled in defconfig_arm64-dpaa-* config. Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver. Installations @@ -191,7 +191,7 @@ following ``make`` command: .. code-block:: console cd <DPDK-source-directory> - make config T=arm64-dpaa2-linux-gcc install + make config T=arm64-dpaa-linux-gcc install Enabling logs ------------- diff --git a/doc/guides/eventdevs/dpaa2.rst b/doc/guides/eventdevs/dpaa2.rst index a24a43c15..dd8ebbcd0 100644 --- a/doc/guides/eventdevs/dpaa2.rst +++ b/doc/guides/eventdevs/dpaa2.rst @@ -71,7 +71,7 @@ following ``make`` command: .. code-block:: console cd <DPDK-source-directory> - make config T=arm64-dpaa2-linux-gcc install + make config T=arm64-dpaa-linux-gcc install Initialization -------------- diff --git a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst index 28a8e0920..e799b0ba4 100644 --- a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst +++ b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst @@ -79,7 +79,7 @@ Copy the NUMA header files and lib to the cross compiler's directories: Configure and cross compile DPDK Build -------------------------------------- -To configure a build, choose one of the target configurations, like arm64-dpaa2-linux-gcc and arm64-thunderx-linux-gcc. +To configure a build, choose one of the target configurations, like arm64-dpaa-linux-gcc and arm64-thunderx-linux-gcc. .. code-block:: console diff --git a/doc/guides/nics/build_and_test.rst b/doc/guides/nics/build_and_test.rst index aae5c111d..f99e019ff 100644 --- a/doc/guides/nics/build_and_test.rst +++ b/doc/guides/nics/build_and_test.rst @@ -35,7 +35,7 @@ Example output: arm-armv7a-linux-gcc arm64-armv8a-linux-gcc - arm64-dpaa2-linux-gcc + arm64-dpaa-linux-gcc arm64-thunderx-linux-gcc arm64-xgene1-linux-gcc i686-native-linux-gcc diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst index f85920012..17839a920 100644 --- a/doc/guides/nics/dpaa.rst +++ b/doc/guides/nics/dpaa.rst @@ -201,14 +201,12 @@ Config File Options The following options can be modified in the ``config`` file. Please note that enabling debugging options may affect system performance. -- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``n``) +- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``y``) - By default it is enabled only for defconfig_arm64-dpaa-* config. Toggle compilation of the ``librte_bus_dpaa`` driver. -- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``n``) +- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``y``) - By default it is enabled only for defconfig_arm64-dpaa-* config. Toggle compilation of the ``librte_pmd_dpaa`` driver. - ``CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER`` (default ``n``) @@ -222,12 +220,6 @@ Please note that enabling debugging options may affect system performance. Enables debugging of the Queue and Buffer Manager layer which interacts with the DPAA hardware. -- ``CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS`` (default ``dpaa``) - - This is not a DPAA specific configuration - it is a generic RTE config. - For optimal performance and hardware utilization, it is expected that DPAA - Mempool driver is used for mempools. For that, this configuration needs to - enabled. Environment Variables ~~~~~~~~~~~~~~~~~~~~~ diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst index 99e4c8d72..b6d9e2129 100644 --- a/doc/guides/nics/dpaa2.rst +++ b/doc/guides/nics/dpaa2.rst @@ -441,21 +441,19 @@ Config File Options The following options can be modified in the ``config`` file. Please note that enabling debugging options may affect system performance. -- ``CONFIG_RTE_LIBRTE_FSLMC_BUS`` (default ``n``) +- ``CONFIG_RTE_LIBRTE_FSLMC_BUS`` (default ``y``) - By default it is enabled only for defconfig_arm64-dpaa2-* config. Toggle compilation of the ``librte_bus_fslmc`` driver. -- ``CONFIG_RTE_LIBRTE_DPAA2_PMD`` (default ``n``) +- ``CONFIG_RTE_LIBRTE_DPAA2_PMD`` (default ``y``) - By default it is enabled only for defconfig_arm64-dpaa2-* config. Toggle compilation of the ``librte_pmd_dpaa2`` driver. - ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``) Toggle display of debugging messages/logic -- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``y``) +- ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``n``) Toggle to use physical address vs virtual address for hardware accelerators. diff --git a/doc/guides/rawdevs/dpaa2_cmdif.rst b/doc/guides/rawdevs/dpaa2_cmdif.rst index ac5f0f137..bcd603c81 100644 --- a/doc/guides/rawdevs/dpaa2_cmdif.rst +++ b/doc/guides/rawdevs/dpaa2_cmdif.rst @@ -77,7 +77,7 @@ following ``make`` command: .. code-block:: console cd <DPDK-source-directory> - make config T=arm64-dpaa2-linux-gcc install + make config T=arm64-dpaa-linux-gcc install Initialization -------------- diff --git a/doc/guides/rawdevs/dpaa2_qdma.rst b/doc/guides/rawdevs/dpaa2_qdma.rst index 1550ca5ba..a5085c2c0 100644 --- a/doc/guides/rawdevs/dpaa2_qdma.rst +++ b/doc/guides/rawdevs/dpaa2_qdma.rst @@ -81,7 +81,7 @@ following ``make`` command: .. code-block:: console cd <DPDK-source-directory> - make config T=arm64-dpaa2-linux-gcc install + make config T=arm64-dpaa-linux-gcc install Initialization -------------- diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst index ae8e7b2f0..c9a135655 100644 --- a/doc/guides/rel_notes/release_19_11.rst +++ b/doc/guides/rel_notes/release_19_11.rst @@ -267,6 +267,9 @@ Removed Items * Quota and Watermark * vhost-scsi +* Removed arm64-dpaa2-* build config. arm64-dpaa-* can now build for both + dpaa and dpaa2 platforms. + API Changes ----------- diff --git a/mk/machine/dpaa2/rte.vars.mk b/mk/machine/dpaa2/rte.vars.mk deleted file mode 100644 index aaa03c424..000000000 --- a/mk/machine/dpaa2/rte.vars.mk +++ /dev/null @@ -1,37 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved. -# Copyright 2016 NXP - -# -# machine: -# -# - can define ARCH variable (overridden by cmdline value) -# - can define CROSS variable (overridden by cmdline value) -# - define MACHINE_CFLAGS variable (overridden by cmdline value) -# - define MACHINE_LDFLAGS variable (overridden by cmdline value) -# - define MACHINE_ASFLAGS variable (overridden by cmdline value) -# - can define CPU_CFLAGS variable (overridden by cmdline value) that -# overrides the one defined in arch. -# - can define CPU_LDFLAGS variable (overridden by cmdline value) that -# overrides the one defined in arch. -# - can define CPU_ASFLAGS variable (overridden by cmdline value) that -# overrides the one defined in arch. -# - may override any previously defined variable -# - -# ARCH = -# CROSS = -# MACHINE_CFLAGS = -# MACHINE_LDFLAGS = -# MACHINE_ASFLAGS = -# CPU_CFLAGS = -# CPU_LDFLAGS = -# CPU_ASFLAGS = -MACHINE_CFLAGS += -march=armv8-a+crc - -ifdef CONFIG_RTE_ARCH_ARM_TUNE -MACHINE_CFLAGS += -mtune=$(CONFIG_RTE_ARCH_ARM_TUNE:"%"=%) -endif - -# To avoid TLS corruption issue. -MACHINE_CFLAGS += -mtls-dialect=trad
dpaa and dpaa2 config have evolved to be same. The same binary can now work across the platforms. So, there is no need to maintain two different build configs. The dpaa config shall work for both generation of dpaa platforms. Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> --- config/arm/arm64_dpaa2_linux_gcc | 16 -------- config/arm/meson.build | 7 ---- config/defconfig_arm64-dpaa-linuxapp-gcc | 16 ++++++-- config/defconfig_arm64-dpaa2-linux-gcc | 1 - config/defconfig_arm64-dpaa2-linuxapp-gcc | 22 ----------- doc/guides/cryptodevs/dpaa2_sec.rst | 4 +- doc/guides/eventdevs/dpaa2.rst | 2 +- .../linux_gsg/cross_build_dpdk_for_arm64.rst | 2 +- doc/guides/nics/build_and_test.rst | 2 +- doc/guides/nics/dpaa.rst | 12 +----- doc/guides/nics/dpaa2.rst | 8 ++-- doc/guides/rawdevs/dpaa2_cmdif.rst | 2 +- doc/guides/rawdevs/dpaa2_qdma.rst | 2 +- doc/guides/rel_notes/release_19_11.rst | 3 ++ mk/machine/dpaa2/rte.vars.mk | 37 ------------------- 15 files changed, 27 insertions(+), 109 deletions(-) delete mode 100644 config/arm/arm64_dpaa2_linux_gcc delete mode 120000 config/defconfig_arm64-dpaa2-linux-gcc delete mode 100644 config/defconfig_arm64-dpaa2-linuxapp-gcc delete mode 100644 mk/machine/dpaa2/rte.vars.mk -- 2.17.1