diff mbox series

[04/36] usb: gadget: s3c-hsudc: remove platform header dependency

Message ID 20191010203043.1241612-4-arnd@arndb.de
State New
Headers show
Series None | expand

Commit Message

Arnd Bergmann Oct. 10, 2019, 8:29 p.m. UTC 
There is no real phy driver, so s3c-hsudc just pokes the registers
itself. Improve this a little by making it a platform data callback
like we do for gpios.

There is only one board using this driver, and it's unlikely
that another would be added, so this is a minimal workaround.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---
 .../include/mach/regs-s3c2443-clock.h         | 49 +++++++++++++++++
 arch/arm/plat-samsung/devs.c                  |  3 +
 drivers/usb/gadget/udc/s3c-hsudc.c            | 55 ++-----------------
 include/linux/platform_data/s3c-hsudc.h       |  2 +
 4 files changed, 58 insertions(+), 51 deletions(-)

-- 
2.20.0

Comments

Krzysztof Kozlowski Oct. 23, 2019, 10:09 a.m. UTC | #1 
On Thu, Oct 10, 2019 at 10:29:48PM +0200, Arnd Bergmann wrote:
> There is no real phy driver, so s3c-hsudc just pokes the registers

> itself. Improve this a little by making it a platform data callback

> like we do for gpios.

> 

> There is only one board using this driver, and it's unlikely

> that another would be added, so this is a minimal workaround.

> 

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> ---

>  .../include/mach/regs-s3c2443-clock.h         | 49 +++++++++++++++++

>  arch/arm/plat-samsung/devs.c                  |  3 +

>  drivers/usb/gadget/udc/s3c-hsudc.c            | 55 ++-----------------

>  include/linux/platform_data/s3c-hsudc.h       |  2 +

>  4 files changed, 58 insertions(+), 51 deletions(-)

> 

> diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h

> index 6bf924612b06..682759549e63 100644

> --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h

> +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h

> @@ -10,6 +10,8 @@

>  #ifndef __ASM_ARM_REGS_S3C2443_CLOCK

>  #define __ASM_ARM_REGS_S3C2443_CLOCK

>  

> +#include <linux/delay.h>

> +

>  #define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)

>  

>  #define S3C2443_PLLCON_MDIVSHIFT	16

> @@ -184,5 +186,52 @@ s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)

>  	return (unsigned int)fvco;

>  }

>  

> +static inline void s3c_hsudc_init_phy(void)

> +{

> +	u32 cfg;

> +

> +	cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;

> +	writel(cfg, S3C2443_PWRCFG);

> +

> +	cfg = readl(S3C2443_URSTCON);

> +	cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);

> +	writel(cfg, S3C2443_URSTCON);

> +	mdelay(1);

> +

> +	cfg = readl(S3C2443_URSTCON);

> +	cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);

> +	writel(cfg, S3C2443_URSTCON);

> +

> +	cfg = readl(S3C2443_PHYCTRL);

> +	cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);

> +	cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);

> +	writel(cfg, S3C2443_PHYCTRL);

> +

> +	cfg = readl(S3C2443_PHYPWR);

> +	cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |

> +		S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |

> +		S3C2443_PHYPWR_ANALOG_PD);

> +	cfg |= S3C2443_PHYPWR_COMMON_ON;

> +	writel(cfg, S3C2443_PHYPWR);

> +

> +	cfg = readl(S3C2443_UCLKCON);

> +	cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |

> +		S3C2443_UCLKCON_TCLKEN);

> +	writel(cfg, S3C2443_UCLKCON);

> +}

> +

> +static inline void s3c_hsudc_uninit_phy(void)

> +{

> +	u32 cfg;

> +

> +	cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;

> +	writel(cfg, S3C2443_PWRCFG);

> +

> +	writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);

> +

> +	cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;

> +	writel(cfg, S3C2443_UCLKCON);

> +}

> +

>  #endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */

>  

> diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c

> index 1d1fa068d228..6e4c1cb07104 100644

> --- a/arch/arm/plat-samsung/devs.c

> +++ b/arch/arm/plat-samsung/devs.c

> @@ -40,6 +40,7 @@

>  #include <mach/dma.h>

>  #include <mach/irqs.h>

>  #include <mach/map.h>

> +#include <mach/regs-s3c2443-clock.h>

>  

>  #include <plat/cpu.h>

>  #include <plat/devs.h>

> @@ -1038,6 +1039,8 @@ struct platform_device s3c_device_usb_hsudc = {

>  void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)

>  {

>  	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);

> +	pd->phy_init = s3c_hsudc_init_phy;

> +	pd->phy_uninit = s3c_hsudc_uninit_phy;

>  }

>  #endif /* CONFIG_PLAT_S3C24XX */

>  

> diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c

> index 858993c73442..d482cbb4bb4d 100644

> --- a/drivers/usb/gadget/udc/s3c-hsudc.c

> +++ b/drivers/usb/gadget/udc/s3c-hsudc.c

> @@ -30,8 +30,6 @@

>  #include <linux/regulator/consumer.h>

>  #include <linux/pm_runtime.h>

>  

> -#include <mach/regs-s3c2443-clock.h>

> -

>  #define S3C_HSUDC_REG(x)	(x)

>  

>  /* Non-Indexed Registers */

> @@ -186,53 +184,6 @@ static inline void __orr32(void __iomem *ptr, u32 val)

>  	writel(readl(ptr) | val, ptr);

>  }

>  

> -static void s3c_hsudc_init_phy(void)

> -{

> -	u32 cfg;

> -

> -	cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;

> -	writel(cfg, S3C2443_PWRCFG);

> -

> -	cfg = readl(S3C2443_URSTCON);

> -	cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);

> -	writel(cfg, S3C2443_URSTCON);

> -	mdelay(1);

> -

> -	cfg = readl(S3C2443_URSTCON);

> -	cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);

> -	writel(cfg, S3C2443_URSTCON);

> -

> -	cfg = readl(S3C2443_PHYCTRL);

> -	cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);

> -	cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);

> -	writel(cfg, S3C2443_PHYCTRL);

> -

> -	cfg = readl(S3C2443_PHYPWR);

> -	cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |

> -		S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |

> -		S3C2443_PHYPWR_ANALOG_PD);

> -	cfg |= S3C2443_PHYPWR_COMMON_ON;

> -	writel(cfg, S3C2443_PHYPWR);

> -

> -	cfg = readl(S3C2443_UCLKCON);

> -	cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |

> -		S3C2443_UCLKCON_TCLKEN);

> -	writel(cfg, S3C2443_UCLKCON);

> -}

> -

> -static void s3c_hsudc_uninit_phy(void)

> -{

> -	u32 cfg;

> -

> -	cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;

> -	writel(cfg, S3C2443_PWRCFG);

> -

> -	writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);

> -

> -	cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;

> -	writel(cfg, S3C2443_UCLKCON);

> -}

> -

>  /**

>   * s3c_hsudc_complete_request - Complete a transfer request.

>   * @hsep: Endpoint to which the request belongs.

> @@ -1188,7 +1139,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,

>  

>  	pm_runtime_get_sync(hsudc->dev);

>  

> -	s3c_hsudc_init_phy();

> +	if (hsudc->pd->phy_init)

> +		hsudc->pd->gpio_init();


Copy paste error - phy_init().

Are here (and in previous usb gadget patch) any dependencies? If so, I
would need an ack to take it through samsung-soc.

Best regards,
Krzysztof

>  	if (hsudc->pd->gpio_init)

>  		hsudc->pd->gpio_init();

>  

> @@ -1210,7 +1162,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget)

>  

>  	spin_lock_irqsave(&hsudc->lock, flags);

>  	hsudc->gadget.speed = USB_SPEED_UNKNOWN;

> -	s3c_hsudc_uninit_phy();

> +	if (hsudc->pd->phy_uninit)

> +		hsudc->pd->phy_uninit();

>  

>  	pm_runtime_put(hsudc->dev);

>  

> diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h

> index 4dc9b8760166..a170939832d5 100644

> --- a/include/linux/platform_data/s3c-hsudc.h

> +++ b/include/linux/platform_data/s3c-hsudc.h

> @@ -26,6 +26,8 @@ struct s3c24xx_hsudc_platdata {

>  	unsigned int	epnum;

>  	void		(*gpio_init)(void);

>  	void		(*gpio_uninit)(void);

> +	void		(*phy_init)(void);

> +	void		(*phy_uninit)(void);

>  };

>  

>  #endif	/* __LINUX_USB_S3C_HSUDC_H */

> -- 

> 2.20.0

>
Arnd Bergmann Oct. 23, 2019, 12:21 p.m. UTC | #2 
On Wed, Oct 23, 2019 at 12:10 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Thu, Oct 10, 2019 at 10:29:48PM +0200, Arnd Bergmann wrote:

> > @@ -1188,7 +1139,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,

> >

> >       pm_runtime_get_sync(hsudc->dev);

> >

> > -     s3c_hsudc_init_phy();

> > +     if (hsudc->pd->phy_init)

> > +             hsudc->pd->gpio_init();

>

> Copy paste error - phy_init().


Fixed, thanks!

> Are here (and in previous usb gadget patch) any dependencies? If so, I

> would need an ack to take it through samsung-soc.


Yes. This patch should not depend on anything else, but later patches
in the series depend on it, so I'd like to keep everything together.

      Arnd
diff mbox series

Patch

diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
index 6bf924612b06..682759549e63 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
@@ -10,6 +10,8 @@ 
 #ifndef __ASM_ARM_REGS_S3C2443_CLOCK
 #define __ASM_ARM_REGS_S3C2443_CLOCK
 
+#include <linux/delay.h>
+
 #define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
 
 #define S3C2443_PLLCON_MDIVSHIFT	16
@@ -184,5 +186,52 @@  s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
 	return (unsigned int)fvco;
 }
 
+static inline void s3c_hsudc_init_phy(void)
+{
+	u32 cfg;
+
+	cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
+	writel(cfg, S3C2443_PWRCFG);
+
+	cfg = readl(S3C2443_URSTCON);
+	cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+	writel(cfg, S3C2443_URSTCON);
+	mdelay(1);
+
+	cfg = readl(S3C2443_URSTCON);
+	cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+	writel(cfg, S3C2443_URSTCON);
+
+	cfg = readl(S3C2443_PHYCTRL);
+	cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
+	cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
+	writel(cfg, S3C2443_PHYCTRL);
+
+	cfg = readl(S3C2443_PHYPWR);
+	cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
+		S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
+		S3C2443_PHYPWR_ANALOG_PD);
+	cfg |= S3C2443_PHYPWR_COMMON_ON;
+	writel(cfg, S3C2443_PHYPWR);
+
+	cfg = readl(S3C2443_UCLKCON);
+	cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
+		S3C2443_UCLKCON_TCLKEN);
+	writel(cfg, S3C2443_UCLKCON);
+}
+
+static inline void s3c_hsudc_uninit_phy(void)
+{
+	u32 cfg;
+
+	cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
+	writel(cfg, S3C2443_PWRCFG);
+
+	writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
+
+	cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
+	writel(cfg, S3C2443_UCLKCON);
+}
+
 #endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
 
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 1d1fa068d228..6e4c1cb07104 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -40,6 +40,7 @@ 
 #include <mach/dma.h>
 #include <mach/irqs.h>
 #include <mach/map.h>
+#include <mach/regs-s3c2443-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -1038,6 +1039,8 @@  struct platform_device s3c_device_usb_hsudc = {
 void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
 {
 	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
+	pd->phy_init = s3c_hsudc_init_phy;
+	pd->phy_uninit = s3c_hsudc_uninit_phy;
 }
 #endif /* CONFIG_PLAT_S3C24XX */
 
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index 858993c73442..d482cbb4bb4d 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -30,8 +30,6 @@ 
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 
-#include <mach/regs-s3c2443-clock.h>
-
 #define S3C_HSUDC_REG(x)	(x)
 
 /* Non-Indexed Registers */
@@ -186,53 +184,6 @@  static inline void __orr32(void __iomem *ptr, u32 val)
 	writel(readl(ptr) | val, ptr);
 }
 
-static void s3c_hsudc_init_phy(void)
-{
-	u32 cfg;
-
-	cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
-	writel(cfg, S3C2443_PWRCFG);
-
-	cfg = readl(S3C2443_URSTCON);
-	cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
-	writel(cfg, S3C2443_URSTCON);
-	mdelay(1);
-
-	cfg = readl(S3C2443_URSTCON);
-	cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
-	writel(cfg, S3C2443_URSTCON);
-
-	cfg = readl(S3C2443_PHYCTRL);
-	cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
-	cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
-	writel(cfg, S3C2443_PHYCTRL);
-
-	cfg = readl(S3C2443_PHYPWR);
-	cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
-		S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
-		S3C2443_PHYPWR_ANALOG_PD);
-	cfg |= S3C2443_PHYPWR_COMMON_ON;
-	writel(cfg, S3C2443_PHYPWR);
-
-	cfg = readl(S3C2443_UCLKCON);
-	cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
-		S3C2443_UCLKCON_TCLKEN);
-	writel(cfg, S3C2443_UCLKCON);
-}
-
-static void s3c_hsudc_uninit_phy(void)
-{
-	u32 cfg;
-
-	cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
-	writel(cfg, S3C2443_PWRCFG);
-
-	writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
-
-	cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
-	writel(cfg, S3C2443_UCLKCON);
-}
-
 /**
  * s3c_hsudc_complete_request - Complete a transfer request.
  * @hsep: Endpoint to which the request belongs.
@@ -1188,7 +1139,8 @@  static int s3c_hsudc_start(struct usb_gadget *gadget,
 
 	pm_runtime_get_sync(hsudc->dev);
 
-	s3c_hsudc_init_phy();
+	if (hsudc->pd->phy_init)
+		hsudc->pd->gpio_init();
 	if (hsudc->pd->gpio_init)
 		hsudc->pd->gpio_init();
 
@@ -1210,7 +1162,8 @@  static int s3c_hsudc_stop(struct usb_gadget *gadget)
 
 	spin_lock_irqsave(&hsudc->lock, flags);
 	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
-	s3c_hsudc_uninit_phy();
+	if (hsudc->pd->phy_uninit)
+		hsudc->pd->phy_uninit();
 
 	pm_runtime_put(hsudc->dev);
 
diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h
index 4dc9b8760166..a170939832d5 100644
--- a/include/linux/platform_data/s3c-hsudc.h
+++ b/include/linux/platform_data/s3c-hsudc.h
@@ -26,6 +26,8 @@  struct s3c24xx_hsudc_platdata {
 	unsigned int	epnum;
 	void		(*gpio_init)(void);
 	void		(*gpio_uninit)(void);
+	void		(*phy_init)(void);
+	void		(*phy_uninit)(void);
 };
 
 #endif	/* __LINUX_USB_S3C_HSUDC_H */