@@ -36,15 +36,11 @@
#include <asm/byteorder.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-udc.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
-
#include "s3c2410_udc.h"
+#include "s3c2410_udc_regs.h"
#define DRIVER_DESC "S3C2410 USB Device Controller Gadget"
#define DRIVER_AUTHOR "Herbert Pötzl <herbert@13thfloor.at>, " \
@@ -57,6 +53,7 @@ static struct s3c2410_udc *the_controller;
static struct clk *udc_clock;
static struct clk *usb_bus_clock;
static void __iomem *base_addr;
+static int irq_usbd;
static u64 rsrc_start;
static u64 rsrc_len;
static struct dentry *s3c2410_udc_debugfs_root;
@@ -839,8 +836,6 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
}
}
-#include <mach/regs-irq.h>
-
/*
* s3c2410_udc_irq - interrupt handler
*/
@@ -981,7 +976,7 @@ static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev)
}
}
- dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD);
+ dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", irq_usbd);
/* Restore old index */
udc_write(idx, S3C2410_UDC_INDEX_REG);
@@ -1784,13 +1779,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
spin_lock_init(&udc->lock);
udc_info = dev_get_platdata(&pdev->dev);
- rsrc_start = S3C2410_PA_USBDEV;
- rsrc_len = S3C24XX_SZ_USBDEV;
-
- if (!request_mem_region(rsrc_start, rsrc_len, gadget_name))
- return -EBUSY;
-
- base_addr = ioremap(rsrc_start, rsrc_len);
+ base_addr = devm_platform_ioremap_resource(pdev, 0);
if (!base_addr) {
retval = -ENOMEM;
goto err_mem;
@@ -1802,17 +1791,19 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
s3c2410_udc_disable(udc);
s3c2410_udc_reinit(udc);
+ irq_usbd = platform_get_irq(pdev, 0);
+
/* irq setup after old hardware state is cleaned up */
- retval = request_irq(IRQ_USBD, s3c2410_udc_irq,
+ retval = request_irq(irq_usbd, s3c2410_udc_irq,
0, gadget_name, udc);
if (retval != 0) {
- dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval);
+ dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval);
retval = -EBUSY;
goto err_map;
}
- dev_dbg(dev, "got irq %i\n", IRQ_USBD);
+ dev_dbg(dev, "got irq %i\n", irq_usbd);
if (udc_info && udc_info->vbus_pin > 0) {
retval = gpio_request(udc_info->vbus_pin, "udc vbus");
@@ -1879,7 +1870,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
if (udc_info && udc_info->vbus_pin > 0)
gpio_free(udc_info->vbus_pin);
err_int:
- free_irq(IRQ_USBD, udc);
+ free_irq(irq_usbd, udc);
err_map:
iounmap(base_addr);
err_mem:
@@ -1913,7 +1904,7 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
free_irq(irq, udc);
}
- free_irq(IRQ_USBD, udc);
+ free_irq(irq_usbd, udc);
iounmap(base_addr);
release_mem_region(rsrc_start, rsrc_len);
@@ -90,6 +90,7 @@ struct s3c2410_udc {
unsigned req_pending : 1;
u8 vbus;
struct dentry *regs_info;
+ int irq;
};
#define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget))
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/regs-udc.h
rename to drivers/usb/gadget/udc/s3c2410_udc_regs.h
The resources are correctly initialized, so just use them instead of relying on hardcoded data from platform headers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- drivers/usb/gadget/udc/s3c2410_udc.c | 31 +++++++------------ drivers/usb/gadget/udc/s3c2410_udc.h | 1 + .../usb/gadget/udc/s3c2410_udc_regs.h | 0 3 files changed, 12 insertions(+), 20 deletions(-) rename arch/arm/plat-samsung/include/plat/regs-udc.h => drivers/usb/gadget/udc/s3c2410_udc_regs.h (100%) -- 2.20.0