mbox series

[v4,00/69] target/arm: Convert aa32 base isa to decodetree

Message ID 20190904193059.26202-1-richard.henderson@linaro.org
Headers show
Series target/arm: Convert aa32 base isa to decodetree | expand

Message

Richard Henderson Sept. 4, 2019, 7:29 p.m. UTC 
This unifies the implementation of the actual instructions for
a32, t32, and t16.

The changes from v3 are minimal, mostly rebase conflicts.  There
is one change for checkpatch warnings, in patch 34 in trans_RFE.

There is one outstanding checkpatch warning, but it's in a minimal
change to some existing code that is removed before the end of the
patch set.

All patches have reviews now.


r~


Richard Henderson (69):
  target/arm: Use store_reg_from_load in thumb2 code
  target/arm: Add stubs for aa32 decodetree
  target/arm: Convert Data Processing (register)
  target/arm: Convert Data Processing (reg-shifted-reg)
  target/arm: Convert Data Processing (immediate)
  target/arm: Convert multiply and multiply accumulate
  target/arm: Simplify UMAAL
  target/arm: Convert Saturating addition and subtraction
  target/arm: Convert Halfword multiply and multiply accumulate
  target/arm: Simplify op_smlaxxx for SMLAL*
  target/arm: Simplify op_smlawx for SMLAW*
  target/arm: Convert MSR (immediate) and hints
  target/arm: Convert MRS/MSR (banked, register)
  target/arm: Convert Cyclic Redundancy Check
  target/arm: Convert BX, BXJ, BLX (register)
  target/arm: Convert CLZ
  target/arm: Convert ERET
  target/arm: Convert the rest of A32 Miscelaneous instructions
  target/arm: Convert T32 ADDW/SUBW
  target/arm: Convert load/store (register, immediate, literal)
  target/arm: Convert Synchronization primitives
  target/arm: Diagnose UNPREDICTABLE ldrex/strex cases
  target/arm: Convert USAD8, USADA8, SBFX, UBFX, BFC, BFI, UDF
  target/arm: Convert Parallel addition and subtraction
  target/arm: Convert packing, unpacking, saturation, and reversal
  target/arm: Convert Signed multiply, signed and unsigned divide
  target/arm: Convert MOVW, MOVT
  target/arm: Convert LDM, STM
  target/arm: Diagnose writeback register in list for LDM for v7
  target/arm: Diagnose too few registers in list for LDM/STM
  target/arm: Diagnose base == pc for LDM/STM
  target/arm: Convert B, BL, BLX (immediate)
  target/arm: Convert SVC
  target/arm: Convert RFE and SRS
  target/arm: Convert Clear-Exclusive, Barriers
  target/arm: Convert CPS (privileged)
  target/arm: Convert SETEND
  target/arm: Convert PLI, PLD, PLDW
  target/arm: Convert Unallocated memory hint
  target/arm: Convert Table Branch
  target/arm: Convert SG
  target/arm: Convert TT
  target/arm: Simplify disas_thumb2_insn
  target/arm: Simplify disas_arm_insn
  target/arm: Add skeleton for T16 decodetree
  target/arm: Convert T16 data-processing (two low regs)
  target/arm: Convert T16 load/store (register offset)
  target/arm: Convert T16 load/store (immediate offset)
  target/arm: Convert T16 add pc/sp (immediate)
  target/arm: Convert T16 load/store multiple
  target/arm: Convert T16 add/sub (3 low, 2 low and imm)
  target/arm: Convert T16 one low register and immediate
  target/arm: Convert T16 branch and exchange
  target/arm: Convert T16 add, compare, move (two high registers)
  target/arm: Convert T16 adjust sp (immediate)
  target/arm: Convert T16, extract
  target/arm: Convert T16, Change processor state
  target/arm: Convert T16, Reverse bytes
  target/arm: Convert T16, nop hints
  target/arm: Split gen_nop_hint
  target/arm: Convert T16, push and pop
  target/arm: Convert T16, Conditional branches, Supervisor call
  target/arm: Convert T16, Miscellaneous 16-bit instructions
  target/arm: Convert T16, shift immediate
  target/arm: Convert T16, load (literal)
  target/arm: Convert T16, Unconditional branch
  target/arm: Convert T16, long branches
  target/arm: Clean up disas_thumb_insn
  target/arm: Inline gen_bx_im into callers

 target/arm/translate.c       | 7179 +++++++++++++++-------------------
 target/arm/Makefile.objs     |   24 +
 target/arm/a32-uncond.decode |   74 +
 target/arm/a32.decode        |  534 +++
 target/arm/t16.decode        |  281 ++
 target/arm/t32.decode        |  631 +++
 6 files changed, 4638 insertions(+), 4085 deletions(-)
 create mode 100644 target/arm/a32-uncond.decode
 create mode 100644 target/arm/a32.decode
 create mode 100644 target/arm/t16.decode
 create mode 100644 target/arm/t32.decode

-- 
2.17.1

Comments

no-reply@patchew.org Sept. 4, 2019, 8:58 p.m. UTC | #1 
Patchew URL: https://patchew.org/QEMU/20190904193059.26202-1-richard.henderson@linaro.org/



Hi,

This series seems to have some coding style problems. See output below for
more information:

Message-id: 20190904193059.26202-1-richard.henderson@linaro.org
Type: series
Subject: [Qemu-devel] [PATCH v4 00/69] target/arm: Convert aa32 base isa to decodetree

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
f240e8f target/arm: Inline gen_bx_im into callers
10d4d3d target/arm: Clean up disas_thumb_insn
e36cea5 target/arm: Convert T16, long branches
1061d1b target/arm: Convert T16, Unconditional branch
7c2aede target/arm: Convert T16, load (literal)
fd73031 target/arm: Convert T16, shift immediate
ac59480 target/arm: Convert T16, Miscellaneous 16-bit instructions
d0ec6df target/arm: Convert T16, Conditional branches, Supervisor call
5c1ac2f target/arm: Convert T16, push and pop
bdac1b8 target/arm: Split gen_nop_hint
0b3fed7 target/arm: Convert T16, nop hints
5021591 target/arm: Convert T16, Reverse bytes
3ec6264 target/arm: Convert T16, Change processor state
8bfb8e3 target/arm: Convert T16, extract
75466c7 target/arm: Convert T16 adjust sp (immediate)
9ab6de5 target/arm: Convert T16 add, compare, move (two high registers)
f004a7c target/arm: Convert T16 branch and exchange
cc1634d target/arm: Convert T16 one low register and immediate
d92915a target/arm: Convert T16 add/sub (3 low, 2 low and imm)
1acf8f6 target/arm: Convert T16 load/store multiple
af56e9a target/arm: Convert T16 add pc/sp (immediate)
c0275cf target/arm: Convert T16 load/store (immediate offset)
bfba5bf target/arm: Convert T16 load/store (register offset)
2f6c9ca target/arm: Convert T16 data-processing (two low regs)
994e0b4 target/arm: Add skeleton for T16 decodetree
25c88a8 target/arm: Simplify disas_arm_insn
446ed56 target/arm: Simplify disas_thumb2_insn
ee41906 target/arm: Convert TT
eb5f39d target/arm: Convert SG
39e761d target/arm: Convert Table Branch
86eec33 target/arm: Convert Unallocated memory hint
d17b1df target/arm: Convert PLI, PLD, PLDW
cdab118 target/arm: Convert SETEND
b374ec7 target/arm: Convert CPS (privileged)
fcf2c5a target/arm: Convert Clear-Exclusive, Barriers
6084bd7 target/arm: Convert RFE and SRS
d3a1d7b target/arm: Convert SVC
967a9fd target/arm: Convert B, BL, BLX (immediate)
e2925d5 target/arm: Diagnose base == pc for LDM/STM
80fca3c target/arm: Diagnose too few registers in list for LDM/STM
b585071 target/arm: Diagnose writeback register in list for LDM for v7
0d41010 target/arm: Convert LDM, STM
0318d42 target/arm: Convert MOVW, MOVT
f911da0 target/arm: Convert Signed multiply, signed and unsigned divide
dc67f09 target/arm: Convert packing, unpacking, saturation, and reversal
76b3d60 target/arm: Convert Parallel addition and subtraction
90d3a3b target/arm: Convert USAD8, USADA8, SBFX, UBFX, BFC, BFI, UDF
5dbd48c target/arm: Diagnose UNPREDICTABLE ldrex/strex cases
3007337 target/arm: Convert Synchronization primitives
e27fda5 target/arm: Convert load/store (register, immediate, literal)
7f75e0f target/arm: Convert T32 ADDW/SUBW
3da4ded target/arm: Convert the rest of A32 Miscelaneous instructions
fd3df88 target/arm: Convert ERET
2116b98 target/arm: Convert CLZ
43f780c target/arm: Convert BX, BXJ, BLX (register)
e46bd40 target/arm: Convert Cyclic Redundancy Check
9824eaa target/arm: Convert MRS/MSR (banked, register)
7c864c7 target/arm: Convert MSR (immediate) and hints
f9b0422 target/arm: Simplify op_smlawx for SMLAW*
60dff02 target/arm: Simplify op_smlaxxx for SMLAL*
7de1dd4 target/arm: Convert Halfword multiply and multiply accumulate
620dfcd target/arm: Convert Saturating addition and subtraction
d795a84 target/arm: Simplify UMAAL
6d5e8d6 target/arm: Convert multiply and multiply accumulate
ed27304 target/arm: Convert Data Processing (immediate)
6b7986e target/arm: Convert Data Processing (reg-shifted-reg)
08c75f2 target/arm: Convert Data Processing (register)
92b92a6 target/arm: Add stubs for aa32 decodetree
010e06b target/arm: Use store_reg_from_load in thumb2 code

=== OUTPUT BEGIN ===
1/69 Checking commit 010e06b2e758 (target/arm: Use store_reg_from_load in thumb2 code)
2/69 Checking commit 92b92a62ad69 (target/arm: Add stubs for aa32 decodetree)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#48: 
new file mode 100644

total: 0 errors, 1 warnings, 154 lines checked

Patch 2/69 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
3/69 Checking commit 08c75f210ec5 (target/arm: Convert Data Processing (register))
4/69 Checking commit 6b7986e01dc9 (target/arm: Convert Data Processing (reg-shifted-reg))
5/69 Checking commit ed273043b335 (target/arm: Convert Data Processing (immediate))
6/69 Checking commit 6d5e8d6635d9 (target/arm: Convert multiply and multiply accumulate)
7/69 Checking commit d795a84e97c8 (target/arm: Simplify UMAAL)
8/69 Checking commit 620dfcda6680 (target/arm: Convert Saturating addition and subtraction)
9/69 Checking commit 7de1dd41c41e (target/arm: Convert Halfword multiply and multiply accumulate)
10/69 Checking commit 60dff02fa9ed (target/arm: Simplify op_smlaxxx for SMLAL*)
11/69 Checking commit f9b04228f14c (target/arm: Simplify op_smlawx for SMLAW*)
12/69 Checking commit 7c864c754920 (target/arm: Convert MSR (immediate) and hints)
13/69 Checking commit 9824eaac1c17 (target/arm: Convert MRS/MSR (banked, register))
14/69 Checking commit e46bd404e5f9 (target/arm: Convert Cyclic Redundancy Check)
15/69 Checking commit 43f780c34d6f (target/arm: Convert BX, BXJ, BLX (register))
16/69 Checking commit 2116b988bc12 (target/arm: Convert CLZ)
17/69 Checking commit fd3df8890864 (target/arm: Convert ERET)
18/69 Checking commit 3da4dedcbb2d (target/arm: Convert the rest of A32 Miscelaneous instructions)
19/69 Checking commit 7f75e0f6d791 (target/arm: Convert T32 ADDW/SUBW)
20/69 Checking commit e27fda585f07 (target/arm: Convert load/store (register, immediate, literal))
21/69 Checking commit 30073379c3c1 (target/arm: Convert Synchronization primitives)
22/69 Checking commit 5dbd48cd4f8c (target/arm: Diagnose UNPREDICTABLE ldrex/strex cases)
23/69 Checking commit 90d3a3b738a0 (target/arm: Convert USAD8, USADA8, SBFX, UBFX, BFC, BFI, UDF)
24/69 Checking commit 76b3d6038d80 (target/arm: Convert Parallel addition and subtraction)
25/69 Checking commit dc67f09ea978 (target/arm: Convert packing, unpacking, saturation, and reversal)
ERROR: trailing statements should be on next line
#785: FILE: target/arm/translate.c:11522:
+            case 1: gen_rev16(tmp, tmp); break;

ERROR: trailing statements should be on next line
#786: FILE: target/arm/translate.c:11523:
+            case 3: gen_revsh(tmp, tmp); break;

total: 2 errors, 0 warnings, 747 lines checked

Patch 25/69 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

26/69 Checking commit f911da0740cf (target/arm: Convert Signed multiply, signed and unsigned divide)
27/69 Checking commit 0318d4286b49 (target/arm: Convert MOVW, MOVT)
28/69 Checking commit 0d41010f7949 (target/arm: Convert LDM, STM)
29/69 Checking commit b5850718adc9 (target/arm: Diagnose writeback register in list for LDM for v7)
30/69 Checking commit 80fca3c503b3 (target/arm: Diagnose too few registers in list for LDM/STM)
31/69 Checking commit e2925d5dce6b (target/arm: Diagnose base == pc for LDM/STM)
32/69 Checking commit 967a9fdae3ba (target/arm: Convert B, BL, BLX (immediate))
33/69 Checking commit d3a1d7b01496 (target/arm: Convert SVC)
34/69 Checking commit 6084bd7f8c96 (target/arm: Convert RFE and SRS)
WARNING: Block comments use a leading /* on a separate line
#64: FILE: target/arm/translate.c:10103:
+        /* DA */ -4, /* IA */ 0, /* DB */ -8, /* IB */ 4

WARNING: Block comments use a leading /* on a separate line
#67: FILE: target/arm/translate.c:10106:
+        /* DA */ -8, /* IA */ 4, /* DB */ -4, /* IB */ 0

total: 0 errors, 2 warnings, 202 lines checked

Patch 34/69 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
35/69 Checking commit fcf2c5ac71c2 (target/arm: Convert Clear-Exclusive, Barriers)
36/69 Checking commit b374ec7008f5 (target/arm: Convert CPS (privileged))
37/69 Checking commit cdab1187dab9 (target/arm: Convert SETEND)
38/69 Checking commit d17b1dfbae34 (target/arm: Convert PLI, PLD, PLDW)
39/69 Checking commit 86eec3335c43 (target/arm: Convert Unallocated memory hint)
40/69 Checking commit 39e761ddb924 (target/arm: Convert Table Branch)
41/69 Checking commit eb5f39d5e4ba (target/arm: Convert SG)
42/69 Checking commit ee419060fd23 (target/arm: Convert TT)
43/69 Checking commit 446ed56b59e0 (target/arm: Simplify disas_thumb2_insn)
44/69 Checking commit 25c88a885268 (target/arm: Simplify disas_arm_insn)
45/69 Checking commit 994e0b46cb4b (target/arm: Add skeleton for T16 decodetree)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#35: 
new file mode 100644

total: 0 errors, 1 warnings, 56 lines checked

Patch 45/69 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
46/69 Checking commit 2f6c9ca3cd0b (target/arm: Convert T16 data-processing (two low regs))
47/69 Checking commit bfba5bf520fa (target/arm: Convert T16 load/store (register offset))
48/69 Checking commit c0275cfb2490 (target/arm: Convert T16 load/store (immediate offset))
49/69 Checking commit af56e9a31ade (target/arm: Convert T16 add pc/sp (immediate))
50/69 Checking commit 1acf8f6a401f (target/arm: Convert T16 load/store multiple)
51/69 Checking commit d92915a5080d (target/arm: Convert T16 add/sub (3 low, 2 low and imm))
52/69 Checking commit cc1634df1fa7 (target/arm: Convert T16 one low register and immediate)
53/69 Checking commit f004a7ce03e9 (target/arm: Convert T16 branch and exchange)
54/69 Checking commit 9ab6de5cc9fe (target/arm: Convert T16 add, compare, move (two high registers))
55/69 Checking commit 75466c74c63b (target/arm: Convert T16 adjust sp (immediate))
56/69 Checking commit 8bfb8e3d1859 (target/arm: Convert T16, extract)
57/69 Checking commit 3ec6264bee2e (target/arm: Convert T16, Change processor state)
58/69 Checking commit 5021591b3dac (target/arm: Convert T16, Reverse bytes)
59/69 Checking commit 0b3fed7d9540 (target/arm: Convert T16, nop hints)
60/69 Checking commit bdac1b8c584b (target/arm: Split gen_nop_hint)
61/69 Checking commit 5c1ac2f5c6b9 (target/arm: Convert T16, push and pop)
62/69 Checking commit d0ec6df88c06 (target/arm: Convert T16, Conditional branches, Supervisor call)
63/69 Checking commit ac594802b762 (target/arm: Convert T16, Miscellaneous 16-bit instructions)
64/69 Checking commit fd73031d10d7 (target/arm: Convert T16, shift immediate)
65/69 Checking commit 7c2aede1dd5f (target/arm: Convert T16, load (literal))
66/69 Checking commit 1061d1b051a9 (target/arm: Convert T16, Unconditional branch)
67/69 Checking commit e36cea5616a4 (target/arm: Convert T16, long branches)
68/69 Checking commit 10d4d3d1b070 (target/arm: Clean up disas_thumb_insn)
69/69 Checking commit f240e8f55d8b (target/arm: Inline gen_bx_im into callers)
=== OUTPUT END ===

Test command exited with code: 1


The full log is available at
http://patchew.org/logs/20190904193059.26202-1-richard.henderson@linaro.org/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
Peter Maydell Sept. 5, 2019, 3:28 p.m. UTC | #2 
On Wed, 4 Sep 2019 at 20:31, Richard Henderson
<richard.henderson@linaro.org> wrote:
>

> This unifies the implementation of the actual instructions for

> a32, t32, and t16.

>

> The changes from v3 are minimal, mostly rebase conflicts.  There

> is one change for checkpatch warnings, in patch 34 in trans_RFE.

>

> There is one outstanding checkpatch warning, but it's in a minimal

> change to some existing code that is removed before the end of the

> patch set.

>

> All patches have reviews now.



Since this is all reviewed and it's big enough that it would
have been a target-arm pullreq all by itself, I've just
applied it directly to master.

thanks
-- PMM