Message ID | 20190903160858.5296-1-richard.henderson@linaro.org |
---|---|
Headers | show |
Series | tcg patch queue | expand |
On 03/09/2019 17:08, Richard Henderson wrote: > The following changes since commit fec105c2abda8567ec15230429c41429b5ee307c: > > Merge remote-tracking branch 'remotes/kraxel/tags/audio-20190828-pull-request' into staging (2019-09-03 14:03:15 +0100) > > are available in the Git repository at: > > https://github.com/rth7680/qemu.git tags/pull-tcg-20190903 > > for you to fetch changes up to c25c283df0f08582df29f1d5d7be1516b851532d: > > tcg: Factor out probe_write() logic into probe_access() (2019-09-03 08:34:18 -0700) > > ---------------------------------------------------------------- > Allow page table bit to swap endianness. > Reorganize watchpoints out of i/o path. > Return host address from probe_write / probe_access. > > ---------------------------------------------------------------- > David Hildenbrand (11): > exec: Factor out core logic of check_watchpoint() > tcg: Check for watchpoints in probe_write() > s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access() > s390x/tcg: Fix length calculation in probe_write_access() > tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code > tcg: Enforce single page access in probe_write() > mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well > hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY > s390x/tcg: Pass a size to probe_write() in do_csst() > tcg: Make probe_write() return a pointer to the host page > tcg: Factor out probe_write() logic into probe_access() > > Richard Henderson (6): > exec: Move user-only watchpoint stubs inline > cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK > exec: Factor out cpu_watchpoint_address_matches > cputlb: Fix size operand for tlb_fill on unaligned store > cputlb: Remove double-alignment in store_helper > cputlb: Handle watchpoints via TLB_WATCHPOINT > > Tony Nguyen (19): > tcg: TCGMemOp is now accelerator independent MemOp > memory: Introduce size_memop > target/mips: Access MemoryRegion with MemOp > hw/s390x: Access MemoryRegion with MemOp > hw/intc/armv7m_nic: Access MemoryRegion with MemOp > hw/virtio: Access MemoryRegion with MemOp > hw/vfio: Access MemoryRegion with MemOp > exec: Access MemoryRegion with MemOp > cputlb: Access MemoryRegion with MemOp > memory: Access MemoryRegion with MemOp > hw/s390x: Hard code size with MO_{8|16|32|64} > target/mips: Hard code size with MO_{8|16|32|64} > exec: Hard code size with MO_{8|16|32|64} > memory: Access MemoryRegion with endianness > cputlb: Replace size and endian operands for MemOp > memory: Single byte swap along the I/O path > cputlb: Byte swap memory transaction attribute > target/sparc: Add TLB entry with attributes > target/sparc: sun4u Invert Endian TTE bit > > include/exec/cpu-all.h | 8 +- > include/exec/exec-all.h | 10 +- > include/exec/memattrs.h | 2 + > include/exec/memop.h | 134 +++++++++++ > include/exec/memory.h | 12 +- > include/hw/core/cpu.h | 37 +++ > target/arm/translate-a64.h | 2 +- > target/arm/translate.h | 2 +- > target/sparc/cpu.h | 2 + > tcg/tcg-op.h | 80 +++--- > tcg/tcg.h | 101 +------- > trace/mem-internal.h | 4 +- > trace/mem.h | 4 +- > accel/tcg/cputlb.c | 414 ++++++++++++++++++-------------- > accel/tcg/user-exec.c | 32 +++ > exec.c | 177 +++----------- > hw/intc/armv7m_nvic.c | 13 +- > hw/s390x/s390-pci-inst.c | 11 +- > hw/vfio/pci-quirks.c | 7 +- > hw/virtio/virtio-pci.c | 15 +- > memory.c | 58 +++-- > memory_ldst.inc.c | 81 ++----- > target/alpha/translate.c | 2 +- > target/arm/translate-a64.c | 48 ++-- > target/arm/translate-sve.c | 2 +- > target/arm/translate.c | 32 +-- > target/hppa/op_helper.c | 2 - > target/hppa/translate.c | 14 +- > target/i386/translate.c | 132 +++++----- > target/m68k/translate.c | 2 +- > target/microblaze/translate.c | 4 +- > target/mips/op_helper.c | 13 +- > target/mips/translate.c | 8 +- > target/openrisc/translate.c | 4 +- > target/ppc/translate.c | 12 +- > target/riscv/insn_trans/trans_rva.inc.c | 8 +- > target/riscv/insn_trans/trans_rvi.inc.c | 4 +- > target/s390x/mem_helper.c | 13 +- > target/s390x/translate.c | 6 +- > target/s390x/translate_vx.inc.c | 10 +- > target/sparc/mmu_helper.c | 40 +-- > target/sparc/translate.c | 14 +- > target/tilegx/translate.c | 10 +- > target/tricore/translate.c | 8 +- > tcg/aarch64/tcg-target.inc.c | 26 +- > tcg/arm/tcg-target.inc.c | 26 +- > tcg/i386/tcg-target.inc.c | 24 +- > tcg/mips/tcg-target.inc.c | 16 +- > tcg/optimize.c | 2 +- > tcg/ppc/tcg-target.inc.c | 12 +- > tcg/riscv/tcg-target.inc.c | 20 +- > tcg/s390/tcg-target.inc.c | 14 +- > tcg/sparc/tcg-target.inc.c | 6 +- > tcg/tcg-op.c | 38 +-- > tcg/tcg.c | 2 +- > MAINTAINERS | 1 + > tcg/README | 2 +- > 57 files changed, 918 insertions(+), 865 deletions(-) > create mode 100644 include/exec/memop.h Is this a pull request rather than just a queue update? I'm just wondering if I should wait for this to get merged first before I start testing the do_transaction_failed hook patches? ATB, Mark.
"PATCH" -> "PULL" in subject :) I wonder if Peter's script works too, I guess it does. Le mar. 3 sept. 2019 18:37, Richard Henderson <richard.henderson@linaro.org> a écrit : > The following changes since commit > fec105c2abda8567ec15230429c41429b5ee307c: > > Merge remote-tracking branch > 'remotes/kraxel/tags/audio-20190828-pull-request' into staging (2019-09-03 > 14:03:15 +0100) > > are available in the Git repository at: > > https://github.com/rth7680/qemu.git tags/pull-tcg-20190903 > > for you to fetch changes up to c25c283df0f08582df29f1d5d7be1516b851532d: > > tcg: Factor out probe_write() logic into probe_access() (2019-09-03 > 08:34:18 -0700) > > ---------------------------------------------------------------- > Allow page table bit to swap endianness. > Reorganize watchpoints out of i/o path. > Return host address from probe_write / probe_access. > > ---------------------------------------------------------------- > David Hildenbrand (11): > exec: Factor out core logic of check_watchpoint() > tcg: Check for watchpoints in probe_write() > s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in > probe_write_access() > s390x/tcg: Fix length calculation in probe_write_access() > tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code > tcg: Enforce single page access in probe_write() > mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well > hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY > s390x/tcg: Pass a size to probe_write() in do_csst() > tcg: Make probe_write() return a pointer to the host page > tcg: Factor out probe_write() logic into probe_access() > > Richard Henderson (6): > exec: Move user-only watchpoint stubs inline > cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK > exec: Factor out cpu_watchpoint_address_matches > cputlb: Fix size operand for tlb_fill on unaligned store > cputlb: Remove double-alignment in store_helper > cputlb: Handle watchpoints via TLB_WATCHPOINT > > Tony Nguyen (19): > tcg: TCGMemOp is now accelerator independent MemOp > memory: Introduce size_memop > target/mips: Access MemoryRegion with MemOp > hw/s390x: Access MemoryRegion with MemOp > hw/intc/armv7m_nic: Access MemoryRegion with MemOp > hw/virtio: Access MemoryRegion with MemOp > hw/vfio: Access MemoryRegion with MemOp > exec: Access MemoryRegion with MemOp > cputlb: Access MemoryRegion with MemOp > memory: Access MemoryRegion with MemOp > hw/s390x: Hard code size with MO_{8|16|32|64} > target/mips: Hard code size with MO_{8|16|32|64} > exec: Hard code size with MO_{8|16|32|64} > memory: Access MemoryRegion with endianness > cputlb: Replace size and endian operands for MemOp > memory: Single byte swap along the I/O path > cputlb: Byte swap memory transaction attribute > target/sparc: Add TLB entry with attributes > target/sparc: sun4u Invert Endian TTE bit > > include/exec/cpu-all.h | 8 +- > include/exec/exec-all.h | 10 +- > include/exec/memattrs.h | 2 + > include/exec/memop.h | 134 +++++++++++ > include/exec/memory.h | 12 +- > include/hw/core/cpu.h | 37 +++ > target/arm/translate-a64.h | 2 +- > target/arm/translate.h | 2 +- > target/sparc/cpu.h | 2 + > tcg/tcg-op.h | 80 +++--- > tcg/tcg.h | 101 +------- > trace/mem-internal.h | 4 +- > trace/mem.h | 4 +- > accel/tcg/cputlb.c | 414 > ++++++++++++++++++-------------- > accel/tcg/user-exec.c | 32 +++ > exec.c | 177 +++----------- > hw/intc/armv7m_nvic.c | 13 +- > hw/s390x/s390-pci-inst.c | 11 +- > hw/vfio/pci-quirks.c | 7 +- > hw/virtio/virtio-pci.c | 15 +- > memory.c | 58 +++-- > memory_ldst.inc.c | 81 ++----- > target/alpha/translate.c | 2 +- > target/arm/translate-a64.c | 48 ++-- > target/arm/translate-sve.c | 2 +- > target/arm/translate.c | 32 +-- > target/hppa/op_helper.c | 2 - > target/hppa/translate.c | 14 +- > target/i386/translate.c | 132 +++++----- > target/m68k/translate.c | 2 +- > target/microblaze/translate.c | 4 +- > target/mips/op_helper.c | 13 +- > target/mips/translate.c | 8 +- > target/openrisc/translate.c | 4 +- > target/ppc/translate.c | 12 +- > target/riscv/insn_trans/trans_rva.inc.c | 8 +- > target/riscv/insn_trans/trans_rvi.inc.c | 4 +- > target/s390x/mem_helper.c | 13 +- > target/s390x/translate.c | 6 +- > target/s390x/translate_vx.inc.c | 10 +- > target/sparc/mmu_helper.c | 40 +-- > target/sparc/translate.c | 14 +- > target/tilegx/translate.c | 10 +- > target/tricore/translate.c | 8 +- > tcg/aarch64/tcg-target.inc.c | 26 +- > tcg/arm/tcg-target.inc.c | 26 +- > tcg/i386/tcg-target.inc.c | 24 +- > tcg/mips/tcg-target.inc.c | 16 +- > tcg/optimize.c | 2 +- > tcg/ppc/tcg-target.inc.c | 12 +- > tcg/riscv/tcg-target.inc.c | 20 +- > tcg/s390/tcg-target.inc.c | 14 +- > tcg/sparc/tcg-target.inc.c | 6 +- > tcg/tcg-op.c | 38 +-- > tcg/tcg.c | 2 +- > MAINTAINERS | 1 + > tcg/README | 2 +- > 57 files changed, 918 insertions(+), 865 deletions(-) > create mode 100644 include/exec/memop.h > >
On Tue, 3 Sep 2019 at 18:00, Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> wrote: > > On 03/09/2019 17:08, Richard Henderson wrote: > > > The following changes since commit fec105c2abda8567ec15230429c41429b5ee307c: > > > > Merge remote-tracking branch 'remotes/kraxel/tags/audio-20190828-pull-request' into staging (2019-09-03 14:03:15 +0100) > > > > are available in the Git repository at: > > > > https://github.com/rth7680/qemu.git tags/pull-tcg-20190903 > > > > for you to fetch changes up to c25c283df0f08582df29f1d5d7be1516b851532d: > > > > tcg: Factor out probe_write() logic into probe_access() (2019-09-03 08:34:18 -0700) > > > > ---------------------------------------------------------------- > > Allow page table bit to swap endianness. > > Reorganize watchpoints out of i/o path. > > Return host address from probe_write / probe_access. > Is this a pull request rather than just a queue update? I'm just wondering if I > should wait for this to get merged first before I start testing the > do_transaction_failed hook patches? It's a pull -- Richard told me on irc that it was just an error in the subject line. thanks -- PMM
On Tue, 3 Sep 2019 at 17:09, Richard Henderson <richard.henderson@linaro.org> wrote: > > The following changes since commit fec105c2abda8567ec15230429c41429b5ee307c: > > Merge remote-tracking branch 'remotes/kraxel/tags/audio-20190828-pull-request' into staging (2019-09-03 14:03:15 +0100) > > are available in the Git repository at: > > https://github.com/rth7680/qemu.git tags/pull-tcg-20190903 > > for you to fetch changes up to c25c283df0f08582df29f1d5d7be1516b851532d: > > tcg: Factor out probe_write() logic into probe_access() (2019-09-03 08:34:18 -0700) > > ---------------------------------------------------------------- > Allow page table bit to swap endianness. > Reorganize watchpoints out of i/o path. > Return host address from probe_write / probe_access. > Applied, thanks. Please update the changelog at https://wiki.qemu.org/ChangeLog/4.2 for any user-visible changes. -- PMM