| Message ID | 20190719210326.15466-1-richard.henderson@linaro.org |
|---|---|
| Headers | show |
| Series | target/arm: Implement ARMv8.1-VHE | expand |
Richard Henderson <richard.henderson@linaro.org> writes: > About half of this patch set is cleanup of the qemu tlb handling > leading up to the actual implementation of VHE, and the biggest > piece of that: The EL2&0 translation regime. > > Testing so far has been limited to booting a debian 9 system with > a 4.9 kernel, and a fedora 30 system with a 5.1 kernel. Both have > KVM enabled, and both report enabling VHE is successful. check-tcg is throwing up errors for ARM: ERROR:/home/alex/lsrc/qemu.git/target/arm/helper.c:5353:define_arm_vh_e2h_redirects_aliases:assertion failed: (src_reg != NULL) > > > r~ > > > Richard Henderson (24): > cputlb: Add tlb_set_asid_for_mmuidx > cputlb: Add tlb_flush_asid_by_mmuidx and friends > target/arm: Install ASIDs for long-form from EL1 > target/arm: Install ASIDs for short-form from EL1 > target/arm: Install ASIDs for EL2 > target/arm: Define isar_feature_aa64_vh > target/arm: Enable HCR_E2H for VHE > target/arm: Add CONTEXTIDR_EL2 > target/arm: Add TTBR1_EL2 > target/arm: Update CNTVCT_EL0 for VHE > target/arm: Add the hypervisor virtual counter > target/arm: Add VHE system register redirection and aliasing > target/arm: Split out vae1_tlbmask, vmalle1_tlbmask > target/arm: Simplify tlb_force_broadcast alternatives > target/arm: Reorganize ARMMMUIdx > target/arm: Add regime_has_2_ranges > target/arm: Update arm_mmu_idx for VHE > target/arm: Update arm_sctlr for VHE > target/arm: Install asids for E2&0 translation regime > target/arm: Flush tlbs for E2&0 translation regime > target/arm: Update arm_phys_excp_target_el for TGE > target/arm: Update regime_is_user for EL2&0 > target/arm: Update {fp,sve}_exception_el for VHE > target/arm: Enable ARMv8.1-VHE in -cpu max > > include/exec/cpu-all.h | 11 + > include/exec/cpu-defs.h | 2 + > include/exec/exec-all.h | 35 ++ > include/qom/cpu.h | 1 + > target/arm/cpu-qom.h | 1 + > target/arm/cpu.h | 259 +++++----- > target/arm/internals.h | 62 ++- > target/arm/translate.h | 2 +- > accel/tcg/cputlb.c | 77 +++ > target/arm/arch_dump.c | 2 +- > target/arm/cpu.c | 2 + > target/arm/cpu64.c | 1 + > target/arm/debug_helper.c | 50 +- > target/arm/helper-a64.c | 2 +- > target/arm/helper.c | 985 ++++++++++++++++++++++++++----------- > target/arm/m_helper.c | 6 +- > target/arm/pauth_helper.c | 9 +- > target/arm/translate-a64.c | 14 +- > target/arm/translate.c | 17 +- > 19 files changed, 1058 insertions(+), 480 deletions(-) -- Alex Bennée
Alex Bennée <alex.bennee@linaro.org> writes: > Richard Henderson <richard.henderson@linaro.org> writes: > >> About half of this patch set is cleanup of the qemu tlb handling >> leading up to the actual implementation of VHE, and the biggest >> piece of that: The EL2&0 translation regime. >> >> Testing so far has been limited to booting a debian 9 system with >> a 4.9 kernel, and a fedora 30 system with a 5.1 kernel. Both have >> KVM enabled, and both report enabling VHE is successful. > > check-tcg is throwing up errors for ARM: > > ERROR:/home/alex/lsrc/qemu.git/target/arm/helper.c:5353:define_arm_vh_e2h_redirects_aliases:assertion > failed: (src_reg != NULL) I'm going to go out on a limb and say this is because the aliases registers are SoftMMU only. Do we even want to handle any re-directs for linux-user? > >> >> >> r~ >> >> >> Richard Henderson (24): >> cputlb: Add tlb_set_asid_for_mmuidx >> cputlb: Add tlb_flush_asid_by_mmuidx and friends >> target/arm: Install ASIDs for long-form from EL1 >> target/arm: Install ASIDs for short-form from EL1 >> target/arm: Install ASIDs for EL2 >> target/arm: Define isar_feature_aa64_vh >> target/arm: Enable HCR_E2H for VHE >> target/arm: Add CONTEXTIDR_EL2 >> target/arm: Add TTBR1_EL2 >> target/arm: Update CNTVCT_EL0 for VHE >> target/arm: Add the hypervisor virtual counter >> target/arm: Add VHE system register redirection and aliasing >> target/arm: Split out vae1_tlbmask, vmalle1_tlbmask >> target/arm: Simplify tlb_force_broadcast alternatives >> target/arm: Reorganize ARMMMUIdx >> target/arm: Add regime_has_2_ranges >> target/arm: Update arm_mmu_idx for VHE >> target/arm: Update arm_sctlr for VHE >> target/arm: Install asids for E2&0 translation regime >> target/arm: Flush tlbs for E2&0 translation regime >> target/arm: Update arm_phys_excp_target_el for TGE >> target/arm: Update regime_is_user for EL2&0 >> target/arm: Update {fp,sve}_exception_el for VHE >> target/arm: Enable ARMv8.1-VHE in -cpu max >> >> include/exec/cpu-all.h | 11 + >> include/exec/cpu-defs.h | 2 + >> include/exec/exec-all.h | 35 ++ >> include/qom/cpu.h | 1 + >> target/arm/cpu-qom.h | 1 + >> target/arm/cpu.h | 259 +++++----- >> target/arm/internals.h | 62 ++- >> target/arm/translate.h | 2 +- >> accel/tcg/cputlb.c | 77 +++ >> target/arm/arch_dump.c | 2 +- >> target/arm/cpu.c | 2 + >> target/arm/cpu64.c | 1 + >> target/arm/debug_helper.c | 50 +- >> target/arm/helper-a64.c | 2 +- >> target/arm/helper.c | 985 ++++++++++++++++++++++++++----------- >> target/arm/m_helper.c | 6 +- >> target/arm/pauth_helper.c | 9 +- >> target/arm/translate-a64.c | 14 +- >> target/arm/translate.c | 17 +- >> 19 files changed, 1058 insertions(+), 480 deletions(-) -- Alex Bennée
On 7/22/19 2:37 AM, Alex Bennée wrote: >>> Testing so far has been limited to booting a debian 9 system with >>> a 4.9 kernel, and a fedora 30 system with a 5.1 kernel. Both have >>> KVM enabled, and both report enabling VHE is successful. >> >> check-tcg is throwing up errors for ARM: >> >> ERROR:/home/alex/lsrc/qemu.git/target/arm/helper.c:5353:define_arm_vh_e2h_redirects_aliases:assertion >> failed: (src_reg != NULL) > > I'm going to go out on a limb and say this is because the aliases > registers are SoftMMU only. Do we even want to handle any re-directs for > linux-user? Ah, no. Thanks for the inspection. r~
Richard Henderson <richard.henderson@linaro.org> writes: > About half of this patch set is cleanup of the qemu tlb handling > leading up to the actual implementation of VHE, and the biggest > piece of that: The EL2&0 translation regime. > > Testing so far has been limited to booting a debian 9 system with > a 4.9 kernel, and a fedora 30 system with a 5.1 kernel. Both have > KVM enabled, and both report enabling VHE is successful. So you haven't booted a kernel via KVM inside the emulation yet? That might explain why I was struggling to do so. For example single-stepping through the guest kernel gets stuck. I suspect that means some state machine doesn't quite work (or possibly that is an existing bug, I need to check without VHE as well). Anyway I've done my pass for now. I'll come back to the later patches when more stuff is working. > > > r~ > > > Richard Henderson (24): > cputlb: Add tlb_set_asid_for_mmuidx > cputlb: Add tlb_flush_asid_by_mmuidx and friends > target/arm: Install ASIDs for long-form from EL1 > target/arm: Install ASIDs for short-form from EL1 > target/arm: Install ASIDs for EL2 > target/arm: Define isar_feature_aa64_vh > target/arm: Enable HCR_E2H for VHE > target/arm: Add CONTEXTIDR_EL2 > target/arm: Add TTBR1_EL2 > target/arm: Update CNTVCT_EL0 for VHE > target/arm: Add the hypervisor virtual counter > target/arm: Add VHE system register redirection and aliasing > target/arm: Split out vae1_tlbmask, vmalle1_tlbmask > target/arm: Simplify tlb_force_broadcast alternatives > target/arm: Reorganize ARMMMUIdx > target/arm: Add regime_has_2_ranges > target/arm: Update arm_mmu_idx for VHE > target/arm: Update arm_sctlr for VHE > target/arm: Install asids for E2&0 translation regime > target/arm: Flush tlbs for E2&0 translation regime > target/arm: Update arm_phys_excp_target_el for TGE > target/arm: Update regime_is_user for EL2&0 > target/arm: Update {fp,sve}_exception_el for VHE > target/arm: Enable ARMv8.1-VHE in -cpu max > > include/exec/cpu-all.h | 11 + > include/exec/cpu-defs.h | 2 + > include/exec/exec-all.h | 35 ++ > include/qom/cpu.h | 1 + > target/arm/cpu-qom.h | 1 + > target/arm/cpu.h | 259 +++++----- > target/arm/internals.h | 62 ++- > target/arm/translate.h | 2 +- > accel/tcg/cputlb.c | 77 +++ > target/arm/arch_dump.c | 2 +- > target/arm/cpu.c | 2 + > target/arm/cpu64.c | 1 + > target/arm/debug_helper.c | 50 +- > target/arm/helper-a64.c | 2 +- > target/arm/helper.c | 985 ++++++++++++++++++++++++++----------- > target/arm/m_helper.c | 6 +- > target/arm/pauth_helper.c | 9 +- > target/arm/translate-a64.c | 14 +- > target/arm/translate.c | 17 +- > 19 files changed, 1058 insertions(+), 480 deletions(-) -- Alex Bennée
About half of this patch set is cleanup of the qemu tlb handling leading up to the actual implementation of VHE, and the biggest piece of that: The EL2&0 translation regime. Testing so far has been limited to booting a debian 9 system with a 4.9 kernel, and a fedora 30 system with a 5.1 kernel. Both have KVM enabled, and both report enabling VHE is successful. r~ Richard Henderson (24): cputlb: Add tlb_set_asid_for_mmuidx cputlb: Add tlb_flush_asid_by_mmuidx and friends target/arm: Install ASIDs for long-form from EL1 target/arm: Install ASIDs for short-form from EL1 target/arm: Install ASIDs for EL2 target/arm: Define isar_feature_aa64_vh target/arm: Enable HCR_E2H for VHE target/arm: Add CONTEXTIDR_EL2 target/arm: Add TTBR1_EL2 target/arm: Update CNTVCT_EL0 for VHE target/arm: Add the hypervisor virtual counter target/arm: Add VHE system register redirection and aliasing target/arm: Split out vae1_tlbmask, vmalle1_tlbmask target/arm: Simplify tlb_force_broadcast alternatives target/arm: Reorganize ARMMMUIdx target/arm: Add regime_has_2_ranges target/arm: Update arm_mmu_idx for VHE target/arm: Update arm_sctlr for VHE target/arm: Install asids for E2&0 translation regime target/arm: Flush tlbs for E2&0 translation regime target/arm: Update arm_phys_excp_target_el for TGE target/arm: Update regime_is_user for EL2&0 target/arm: Update {fp,sve}_exception_el for VHE target/arm: Enable ARMv8.1-VHE in -cpu max include/exec/cpu-all.h | 11 + include/exec/cpu-defs.h | 2 + include/exec/exec-all.h | 35 ++ include/qom/cpu.h | 1 + target/arm/cpu-qom.h | 1 + target/arm/cpu.h | 259 +++++----- target/arm/internals.h | 62 ++- target/arm/translate.h | 2 +- accel/tcg/cputlb.c | 77 +++ target/arm/arch_dump.c | 2 +- target/arm/cpu.c | 2 + target/arm/cpu64.c | 1 + target/arm/debug_helper.c | 50 +- target/arm/helper-a64.c | 2 +- target/arm/helper.c | 985 ++++++++++++++++++++++++++----------- target/arm/m_helper.c | 6 +- target/arm/pauth_helper.c | 9 +- target/arm/translate-a64.c | 14 +- target/arm/translate.c | 17 +- 19 files changed, 1058 insertions(+), 480 deletions(-) -- 2.17.1