diff mbox series

[v2] soc: qcom: apr: Don't use reg for domain id

Message ID 20190523150153.13136-1-bjorn.andersson@linaro.org
State Accepted
Commit 70d22b78d3235303555c921246e3c1ec37b0a29c
Headers show
Series [v2] soc: qcom: apr: Don't use reg for domain id | expand

Commit Message

Bjorn Andersson May 23, 2019, 3:01 p.m. UTC
The reg property represents the address and size on the bus that a
device lives, but for APR the parent is a rpmsg bus, which does not have
numerical addresses. Simply defining #address/#size-cells to 1 and 0,
respectively, to silence the compiler is not an appropriate solution.

Replace the use of "reg" with an APR specific property.

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

---

Changes since v1:
- Fixed example to match change

 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt | 6 +++---
 drivers/soc/qcom/apr.c                                  | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

-- 
2.18.0

Comments

Rob Herring (Arm) June 14, 2019, 4:57 p.m. UTC | #1
On Thu, 23 May 2019 08:01:53 -0700, Bjorn Andersson wrote:
> The reg property represents the address and size on the bus that a

> device lives, but for APR the parent is a rpmsg bus, which does not have

> numerical addresses. Simply defining #address/#size-cells to 1 and 0,

> respectively, to silence the compiler is not an appropriate solution.

> 

> Replace the use of "reg" with an APR specific property.

> 

> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---

> 

> Changes since v1:

> - Fixed example to match change

> 

>  Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt | 6 +++---

>  drivers/soc/qcom/apr.c                                  | 2 +-

>  2 files changed, 4 insertions(+), 4 deletions(-)

> 


Reviewed-by: Rob Herring <robh@kernel.org>
Bjorn Andersson June 15, 2019, 7:07 a.m. UTC | #2
On Fri 14 Jun 09:57 PDT 2019, Rob Herring wrote:

> On Thu, 23 May 2019 08:01:53 -0700, Bjorn Andersson wrote:

> > The reg property represents the address and size on the bus that a

> > device lives, but for APR the parent is a rpmsg bus, which does not have

> > numerical addresses. Simply defining #address/#size-cells to 1 and 0,

> > respectively, to silence the compiler is not an appropriate solution.

> > 

> > Replace the use of "reg" with an APR specific property.

> > 

> > Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> > ---

> > 

> > Changes since v1:

> > - Fixed example to match change

> > 

> >  Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt | 6 +++---

> >  drivers/soc/qcom/apr.c                                  | 2 +-

> >  2 files changed, 4 insertions(+), 4 deletions(-)

> > 

> 

> Reviewed-by: Rob Herring <robh@kernel.org>


Thanks Rob, patch applied.

Regards,
Bjorn
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
index bcc612cc7423..db501269f47b 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -9,7 +9,7 @@  used for audio/voice services on the QDSP.
 	Value type: <stringlist>
 	Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2"
 
-- reg
+- qcom,apr-domain
 	Usage: required
 	Value type: <u32>
 	Definition: Destination processor ID.
@@ -49,9 +49,9 @@  by the individual bindings for the specific service
 The following example represents a QDSP based sound card on a MSM8996 device
 which uses apr as communication between Apps and QDSP.
 
-	apr@4 {
+	apr {
 		compatible = "qcom,apr-v2";
-		reg = <APR_DOMAIN_ADSP>;
+		qcom,apr-domain = <APR_DOMAIN_ADSP>;
 
 		q6core@3 {
 			compatible = "qcom,q6core";
diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 74f8b9607daa..b83d71b2e0a4 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -276,7 +276,7 @@  static int apr_probe(struct rpmsg_device *rpdev)
 	if (!apr)
 		return -ENOMEM;
 
-	ret = of_property_read_u32(dev->of_node, "reg", &apr->dest_domain_id);
+	ret = of_property_read_u32(dev->of_node, "qcom,apr-domain", &apr->dest_domain_id);
 	if (ret) {
 		dev_err(dev, "APR Domain ID not specified in DT\n");
 		return ret;