diff mbox series

serial: Fix an invalid comparing statement

Message ID 1558933288-30023-1-git-send-email-sugaya.taichi@socionext.com
State New
Headers show
Series serial: Fix an invalid comparing statement | expand

Commit Message

Sugaya Taichi May 27, 2019, 5:01 a.m. UTC
Drop the if-statement which refers to 8th bit field of u8 variable.
The bit field is no longer used.

Fixes: ba44dc043004 ("serial: Add Milbeaut serial control")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>

---
 drivers/tty/serial/milbeaut_usio.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

-- 
1.9.1

Comments

Sugaya Taichi June 10, 2019, 11:31 a.m. UTC | #1
Hi

Does anyone have comments?

On 2019/05/27 14:01, Sugaya Taichi wrote:
> Drop the if-statement which refers to 8th bit field of u8 variable.

> The bit field is no longer used.

> 

> Fixes: ba44dc043004 ("serial: Add Milbeaut serial control")

> Reported-by: Colin Ian King <colin.king@canonical.com>

> Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>

> ---

>   drivers/tty/serial/milbeaut_usio.c | 15 +++++----------

>   1 file changed, 5 insertions(+), 10 deletions(-)

> 

> diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c

> index 949ab7e..d7207ab 100644

> --- a/drivers/tty/serial/milbeaut_usio.c

> +++ b/drivers/tty/serial/milbeaut_usio.c

> @@ -56,7 +56,6 @@

>   #define MLB_USIO_SSR_FRE		BIT(4)

>   #define MLB_USIO_SSR_PE			BIT(5)

>   #define MLB_USIO_SSR_REC		BIT(7)

> -#define MLB_USIO_SSR_BRK		BIT(8)

>   #define MLB_USIO_FCR_FE1		BIT(0)

>   #define MLB_USIO_FCR_FE2		BIT(1)

>   #define MLB_USIO_FCR_FCL1		BIT(2)

> @@ -180,18 +179,14 @@ static void mlb_usio_rx_chars(struct uart_port *port)

>   		if (status & MLB_USIO_SSR_ORE)

>   			port->icount.overrun++;

>   		status &= port->read_status_mask;

> -		if (status & MLB_USIO_SSR_BRK) {

> -			flag = TTY_BREAK;

> +		if (status & MLB_USIO_SSR_PE) {

> +			flag = TTY_PARITY;

>   			ch = 0;

>   		} else

> -			if (status & MLB_USIO_SSR_PE) {

> -				flag = TTY_PARITY;

> +			if (status & MLB_USIO_SSR_FRE) {

> +				flag = TTY_FRAME;

>   				ch = 0;

> -			} else

> -				if (status & MLB_USIO_SSR_FRE) {

> -					flag = TTY_FRAME;

> -					ch = 0;

> -				}

> +			}

>   		if (flag)

>   			uart_insert_char(port, status, MLB_USIO_SSR_ORE,

>   					 ch, flag);

>
Greg KH June 10, 2019, 4:56 p.m. UTC | #2
On Mon, May 27, 2019 at 02:01:27PM +0900, Sugaya Taichi wrote:
> Drop the if-statement which refers to 8th bit field of u8 variable.

> The bit field is no longer used.

> 

> Fixes: ba44dc043004 ("serial: Add Milbeaut serial control")

> Reported-by: Colin Ian King <colin.king@canonical.com>

> Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>

> ---

>  drivers/tty/serial/milbeaut_usio.c | 15 +++++----------

>  1 file changed, 5 insertions(+), 10 deletions(-)

> 

> diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c

> index 949ab7e..d7207ab 100644

> --- a/drivers/tty/serial/milbeaut_usio.c

> +++ b/drivers/tty/serial/milbeaut_usio.c

> @@ -56,7 +56,6 @@

>  #define MLB_USIO_SSR_FRE		BIT(4)

>  #define MLB_USIO_SSR_PE			BIT(5)

>  #define MLB_USIO_SSR_REC		BIT(7)

> -#define MLB_USIO_SSR_BRK		BIT(8)

>  #define MLB_USIO_FCR_FE1		BIT(0)

>  #define MLB_USIO_FCR_FE2		BIT(1)

>  #define MLB_USIO_FCR_FCL1		BIT(2)

> @@ -180,18 +179,14 @@ static void mlb_usio_rx_chars(struct uart_port *port)

>  		if (status & MLB_USIO_SSR_ORE)

>  			port->icount.overrun++;

>  		status &= port->read_status_mask;

> -		if (status & MLB_USIO_SSR_BRK) {

> -			flag = TTY_BREAK;

> +		if (status & MLB_USIO_SSR_PE) {

> +			flag = TTY_PARITY;

>  			ch = 0;

>  		} else

> -			if (status & MLB_USIO_SSR_PE) {

> -				flag = TTY_PARITY;

> +			if (status & MLB_USIO_SSR_FRE) {

> +				flag = TTY_FRAME;

>  				ch = 0;

> -			} else

> -				if (status & MLB_USIO_SSR_FRE) {

> -					flag = TTY_FRAME;

> -					ch = 0;

> -				}

> +			}

>  		if (flag)

>  			uart_insert_char(port, status, MLB_USIO_SSR_ORE,

>  					 ch, flag);


While the code never actually supported Break, you are explicitly
removing that logic now.  So shouldn't you instead _fix_ break handling?
The code before and after your change does not work any differently, so
this patch isn't really needed at this point.

thanks,

greg k-h
Sugaya Taichi June 12, 2019, 9:18 a.m. UTC | #3
Hi,

On 2019/06/11 1:56, Greg Kroah-Hartman wrote:
> On Mon, May 27, 2019 at 02:01:27PM +0900, Sugaya Taichi wrote:

>> Drop the if-statement which refers to 8th bit field of u8 variable.

>> The bit field is no longer used.

>>

>> Fixes: ba44dc043004 ("serial: Add Milbeaut serial control")

>> Reported-by: Colin Ian King <colin.king@canonical.com>

>> Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>

>> ---

>>   drivers/tty/serial/milbeaut_usio.c | 15 +++++----------

>>   1 file changed, 5 insertions(+), 10 deletions(-)

>>

>> diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c

>> index 949ab7e..d7207ab 100644

>> --- a/drivers/tty/serial/milbeaut_usio.c

>> +++ b/drivers/tty/serial/milbeaut_usio.c

>> @@ -56,7 +56,6 @@

>>   #define MLB_USIO_SSR_FRE		BIT(4)

>>   #define MLB_USIO_SSR_PE			BIT(5)

>>   #define MLB_USIO_SSR_REC		BIT(7)

>> -#define MLB_USIO_SSR_BRK		BIT(8)

>>   #define MLB_USIO_FCR_FE1		BIT(0)

>>   #define MLB_USIO_FCR_FE2		BIT(1)

>>   #define MLB_USIO_FCR_FCL1		BIT(2)

>> @@ -180,18 +179,14 @@ static void mlb_usio_rx_chars(struct uart_port *port)

>>   		if (status & MLB_USIO_SSR_ORE)

>>   			port->icount.overrun++;

>>   		status &= port->read_status_mask;

>> -		if (status & MLB_USIO_SSR_BRK) {

>> -			flag = TTY_BREAK;

>> +		if (status & MLB_USIO_SSR_PE) {

>> +			flag = TTY_PARITY;

>>   			ch = 0;

>>   		} else

>> -			if (status & MLB_USIO_SSR_PE) {

>> -				flag = TTY_PARITY;

>> +			if (status & MLB_USIO_SSR_FRE) {

>> +				flag = TTY_FRAME;

>>   				ch = 0;

>> -			} else

>> -				if (status & MLB_USIO_SSR_FRE) {

>> -					flag = TTY_FRAME;

>> -					ch = 0;

>> -				}

>> +			}

>>   		if (flag)

>>   			uart_insert_char(port, status, MLB_USIO_SSR_ORE,

>>   					 ch, flag);

> 

> While the code never actually supported Break, you are explicitly

> removing that logic now.  So shouldn't you instead _fix_ break handling?

> The code before and after your change does not work any differently, so

> this patch isn't really needed at this point.

> 


According to research, MLB_USIO_SSR_BRK was a remnant of old HW.
Since current one does not handle the Break, all logic related it should be
removed. I try to make a new fix patch.

Thanks,
Sugaya Taichi

> thanks,

> 

> greg k-h

>
diff mbox series

Patch

diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c
index 949ab7e..d7207ab 100644
--- a/drivers/tty/serial/milbeaut_usio.c
+++ b/drivers/tty/serial/milbeaut_usio.c
@@ -56,7 +56,6 @@ 
 #define MLB_USIO_SSR_FRE		BIT(4)
 #define MLB_USIO_SSR_PE			BIT(5)
 #define MLB_USIO_SSR_REC		BIT(7)
-#define MLB_USIO_SSR_BRK		BIT(8)
 #define MLB_USIO_FCR_FE1		BIT(0)
 #define MLB_USIO_FCR_FE2		BIT(1)
 #define MLB_USIO_FCR_FCL1		BIT(2)
@@ -180,18 +179,14 @@  static void mlb_usio_rx_chars(struct uart_port *port)
 		if (status & MLB_USIO_SSR_ORE)
 			port->icount.overrun++;
 		status &= port->read_status_mask;
-		if (status & MLB_USIO_SSR_BRK) {
-			flag = TTY_BREAK;
+		if (status & MLB_USIO_SSR_PE) {
+			flag = TTY_PARITY;
 			ch = 0;
 		} else
-			if (status & MLB_USIO_SSR_PE) {
-				flag = TTY_PARITY;
+			if (status & MLB_USIO_SSR_FRE) {
+				flag = TTY_FRAME;
 				ch = 0;
-			} else
-				if (status & MLB_USIO_SSR_FRE) {
-					flag = TTY_FRAME;
-					ch = 0;
-				}
+			}
 		if (flag)
 			uart_insert_char(port, status, MLB_USIO_SSR_ORE,
 					 ch, flag);