diff mbox series

[7/7] dmaengine: sprd: Add interrupt support for 2-stage transfer

Message ID 07c070b4397296a4500d04abe16dfd8a71a2f211.1555330115.git.baolin.wang@linaro.org
State Superseded
Headers show
Series Fix some bugs and add new feature for Spreadtrum DMA engine | expand

Commit Message

(Exiting) Baolin Wang April 15, 2019, 12:15 p.m. UTC 
For 2-stage transfer, some users like Audio still need transaction interrupt
to notify when the 2-stage transfer is completed. Thus we should enable
2-stage transfer interrupt to support this feature.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

---
 drivers/dma/sprd-dma.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

-- 
1.7.9.5

Comments

Vinod Koul April 29, 2019, 12:01 p.m. UTC | #1 
On 15-04-19, 20:15, Baolin Wang wrote:
> For 2-stage transfer, some users like Audio still need transaction interrupt

> to notify when the 2-stage transfer is completed. Thus we should enable

> 2-stage transfer interrupt to support this feature.

> 

> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

> ---

>  drivers/dma/sprd-dma.c |   22 +++++++++++++++++++++-

>  1 file changed, 21 insertions(+), 1 deletion(-)

> 

> diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c

> index cc9c24d..4c18f44 100644

> --- a/drivers/dma/sprd-dma.c

> +++ b/drivers/dma/sprd-dma.c

> @@ -62,6 +62,8 @@

>  /* SPRD_DMA_GLB_2STAGE_GRP register definition */

>  #define SPRD_DMA_GLB_2STAGE_EN		BIT(24)

>  #define SPRD_DMA_GLB_CHN_INT_MASK	GENMASK(23, 20)

> +#define SPRD_DMA_GLB_DEST_INT		BIT(22)

> +#define SPRD_DMA_GLB_SRC_INT		BIT(20)

>  #define SPRD_DMA_GLB_LIST_DONE_TRG	BIT(19)

>  #define SPRD_DMA_GLB_TRANS_DONE_TRG	BIT(18)

>  #define SPRD_DMA_GLB_BLOCK_DONE_TRG	BIT(17)

> @@ -135,6 +137,7 @@

>  /* define DMA channel mode & trigger mode mask */

>  #define SPRD_DMA_CHN_MODE_MASK		GENMASK(7, 0)

>  #define SPRD_DMA_TRG_MODE_MASK		GENMASK(7, 0)

> +#define SPRD_DMA_INT_TYPE_MASK		GENMASK(7, 0)

>  

>  /* define the DMA transfer step type */

>  #define SPRD_DMA_NONE_STEP		0

> @@ -190,6 +193,7 @@ struct sprd_dma_chn {

>  	u32			dev_id;

>  	enum sprd_dma_chn_mode	chn_mode;

>  	enum sprd_dma_trg_mode	trg_mode;

> +	enum sprd_dma_int_type	int_type;

>  	struct sprd_dma_desc	*cur_desc;

>  };

>  

> @@ -429,6 +433,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)

>  		val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;

>  		val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;

>  		val |= SPRD_DMA_GLB_2STAGE_EN;

> +		if (schan->int_type != SPRD_DMA_NO_INT)


Who configure int_type?

> +			val |= SPRD_DMA_GLB_SRC_INT;

> +

>  		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);

>  		break;

>  

> @@ -436,6 +443,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)

>  		val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;

>  		val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;

>  		val |= SPRD_DMA_GLB_2STAGE_EN;

> +		if (schan->int_type != SPRD_DMA_NO_INT)

> +			val |= SPRD_DMA_GLB_SRC_INT;

> +

>  		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);

>  		break;

>  

> @@ -443,6 +453,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)

>  		val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &

>  			SPRD_DMA_GLB_DEST_CHN_MASK;

>  		val |= SPRD_DMA_GLB_2STAGE_EN;

> +		if (schan->int_type != SPRD_DMA_NO_INT)

> +			val |= SPRD_DMA_GLB_DEST_INT;

> +

>  		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);

>  		break;

>  

> @@ -450,6 +463,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)

>  		val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &

>  			SPRD_DMA_GLB_DEST_CHN_MASK;

>  		val |= SPRD_DMA_GLB_2STAGE_EN;

> +		if (schan->int_type != SPRD_DMA_NO_INT)

> +			val |= SPRD_DMA_GLB_DEST_INT;

> +

>  		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);

>  		break;

>  

> @@ -911,11 +927,15 @@ static int sprd_dma_fill_linklist_desc(struct dma_chan *chan,

>  		schan->linklist.virt_addr = 0;

>  	}

>  

> -	/* Set channel mode and trigger mode for 2-stage transfer */

> +	/*

> +	 * Set channel mode, interrupt mode and trigger mode for 2-stage

> +	 * transfer.

> +	 */

>  	schan->chn_mode =

>  		(flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;

>  	schan->trg_mode =

>  		(flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;

> +	schan->int_type = flags & SPRD_DMA_INT_TYPE_MASK;

>  

>  	sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);

>  	if (!sdesc)

> -- 

> 1.7.9.5


-- 
~Vinod
(Exiting) Baolin Wang April 29, 2019, 12:11 p.m. UTC | #2 
On Mon, 29 Apr 2019 at 20:01, Vinod Koul <vkoul@kernel.org> wrote:
>

> On 15-04-19, 20:15, Baolin Wang wrote:

> > For 2-stage transfer, some users like Audio still need transaction interrupt

> > to notify when the 2-stage transfer is completed. Thus we should enable

> > 2-stage transfer interrupt to support this feature.

> >

> > Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

> > ---

> >  drivers/dma/sprd-dma.c |   22 +++++++++++++++++++++-

> >  1 file changed, 21 insertions(+), 1 deletion(-)

> >

> > diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c

> > index cc9c24d..4c18f44 100644

> > --- a/drivers/dma/sprd-dma.c

> > +++ b/drivers/dma/sprd-dma.c

> > @@ -62,6 +62,8 @@

> >  /* SPRD_DMA_GLB_2STAGE_GRP register definition */

> >  #define SPRD_DMA_GLB_2STAGE_EN               BIT(24)

> >  #define SPRD_DMA_GLB_CHN_INT_MASK    GENMASK(23, 20)

> > +#define SPRD_DMA_GLB_DEST_INT                BIT(22)

> > +#define SPRD_DMA_GLB_SRC_INT         BIT(20)

> >  #define SPRD_DMA_GLB_LIST_DONE_TRG   BIT(19)

> >  #define SPRD_DMA_GLB_TRANS_DONE_TRG  BIT(18)

> >  #define SPRD_DMA_GLB_BLOCK_DONE_TRG  BIT(17)

> > @@ -135,6 +137,7 @@

> >  /* define DMA channel mode & trigger mode mask */

> >  #define SPRD_DMA_CHN_MODE_MASK               GENMASK(7, 0)

> >  #define SPRD_DMA_TRG_MODE_MASK               GENMASK(7, 0)

> > +#define SPRD_DMA_INT_TYPE_MASK               GENMASK(7, 0)

> >

> >  /* define the DMA transfer step type */

> >  #define SPRD_DMA_NONE_STEP           0

> > @@ -190,6 +193,7 @@ struct sprd_dma_chn {

> >       u32                     dev_id;

> >       enum sprd_dma_chn_mode  chn_mode;

> >       enum sprd_dma_trg_mode  trg_mode;

> > +     enum sprd_dma_int_type  int_type;

> >       struct sprd_dma_desc    *cur_desc;

> >  };

> >

> > @@ -429,6 +433,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)

> >               val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;

> >               val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;

> >               val |= SPRD_DMA_GLB_2STAGE_EN;

> > +             if (schan->int_type != SPRD_DMA_NO_INT)

>

> Who configure int_type?


The int_type is configured through the flags of
sprd_dma_prep_slave_sg() by users, see:
https://elixir.bootlin.com/linux/v5.1-rc6/source/include/linux/dma/sprd-dma.h#L9

>

> > +                     val |= SPRD_DMA_GLB_SRC_INT;

> > +

> >               sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);

> >               break;

> >

> > @@ -436,6 +443,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)

> >               val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;

> >               val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;

> >               val |= SPRD_DMA_GLB_2STAGE_EN;

> > +             if (schan->int_type != SPRD_DMA_NO_INT)

> > +                     val |= SPRD_DMA_GLB_SRC_INT;

> > +

> >               sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);

> >               break;

> >

> > @@ -443,6 +453,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)

> >               val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &

> >                       SPRD_DMA_GLB_DEST_CHN_MASK;

> >               val |= SPRD_DMA_GLB_2STAGE_EN;

> > +             if (schan->int_type != SPRD_DMA_NO_INT)

> > +                     val |= SPRD_DMA_GLB_DEST_INT;

> > +

> >               sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);

> >               break;

> >

> > @@ -450,6 +463,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)

> >               val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &

> >                       SPRD_DMA_GLB_DEST_CHN_MASK;

> >               val |= SPRD_DMA_GLB_2STAGE_EN;

> > +             if (schan->int_type != SPRD_DMA_NO_INT)

> > +                     val |= SPRD_DMA_GLB_DEST_INT;

> > +

> >               sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);

> >               break;

> >

> > @@ -911,11 +927,15 @@ static int sprd_dma_fill_linklist_desc(struct dma_chan *chan,

> >               schan->linklist.virt_addr = 0;

> >       }

> >

> > -     /* Set channel mode and trigger mode for 2-stage transfer */

> > +     /*

> > +      * Set channel mode, interrupt mode and trigger mode for 2-stage

> > +      * transfer.

> > +      */

> >       schan->chn_mode =

> >               (flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;

> >       schan->trg_mode =

> >               (flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;

> > +     schan->int_type = flags & SPRD_DMA_INT_TYPE_MASK;

> >

> >       sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);

> >       if (!sdesc)

> > --

> > 1.7.9.5

>

> --

> ~Vinod




-- 
Baolin Wang
Best Regards
Vinod Koul April 29, 2019, 2:10 p.m. UTC | #3 
On 29-04-19, 20:11, Baolin Wang wrote:
> On Mon, 29 Apr 2019 at 20:01, Vinod Koul <vkoul@kernel.org> wrote:

> > On 15-04-19, 20:15, Baolin Wang wrote:


> > > @@ -429,6 +433,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)

> > >               val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;

> > >               val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;

> > >               val |= SPRD_DMA_GLB_2STAGE_EN;

> > > +             if (schan->int_type != SPRD_DMA_NO_INT)

> >

> > Who configure int_type?

> 

> The int_type is configured through the flags of

> sprd_dma_prep_slave_sg() by users, see:

> https://elixir.bootlin.com/linux/v5.1-rc6/source/include/linux/dma/sprd-dma.h#L9


Please use DMA_PREP_INTERRUPT flag instead!

-- 
~Vinod
(Exiting) Baolin Wang April 30, 2019, 5:37 a.m. UTC | #4 
On Mon, 29 Apr 2019 at 22:10, Vinod Koul <vkoul@kernel.org> wrote:
>

> On 29-04-19, 20:11, Baolin Wang wrote:

> > On Mon, 29 Apr 2019 at 20:01, Vinod Koul <vkoul@kernel.org> wrote:

> > > On 15-04-19, 20:15, Baolin Wang wrote:

>

> > > > @@ -429,6 +433,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)

> > > >               val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;

> > > >               val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;

> > > >               val |= SPRD_DMA_GLB_2STAGE_EN;

> > > > +             if (schan->int_type != SPRD_DMA_NO_INT)

> > >

> > > Who configure int_type?

> >

> > The int_type is configured through the flags of

> > sprd_dma_prep_slave_sg() by users, see:

> > https://elixir.bootlin.com/linux/v5.1-rc6/source/include/linux/dma/sprd-dma.h#L9

>

> Please use DMA_PREP_INTERRUPT flag instead!


We can not use DMA_PREP_INTERRUPT flag, since we have some Spreadtrum
specific DMA interrupt flags configured by users, which I think we
have made a consensus before. See:
https://elixir.bootlin.com/linux/v5.1-rc6/source/include/linux/dma/sprd-dma.h#L105

-- 
Baolin Wang
Best Regards
diff mbox series

Patch

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index cc9c24d..4c18f44 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -62,6 +62,8 @@ 
 /* SPRD_DMA_GLB_2STAGE_GRP register definition */
 #define SPRD_DMA_GLB_2STAGE_EN		BIT(24)
 #define SPRD_DMA_GLB_CHN_INT_MASK	GENMASK(23, 20)
+#define SPRD_DMA_GLB_DEST_INT		BIT(22)
+#define SPRD_DMA_GLB_SRC_INT		BIT(20)
 #define SPRD_DMA_GLB_LIST_DONE_TRG	BIT(19)
 #define SPRD_DMA_GLB_TRANS_DONE_TRG	BIT(18)
 #define SPRD_DMA_GLB_BLOCK_DONE_TRG	BIT(17)
@@ -135,6 +137,7 @@ 
 /* define DMA channel mode & trigger mode mask */
 #define SPRD_DMA_CHN_MODE_MASK		GENMASK(7, 0)
 #define SPRD_DMA_TRG_MODE_MASK		GENMASK(7, 0)
+#define SPRD_DMA_INT_TYPE_MASK		GENMASK(7, 0)
 
 /* define the DMA transfer step type */
 #define SPRD_DMA_NONE_STEP		0
@@ -190,6 +193,7 @@  struct sprd_dma_chn {
 	u32			dev_id;
 	enum sprd_dma_chn_mode	chn_mode;
 	enum sprd_dma_trg_mode	trg_mode;
+	enum sprd_dma_int_type	int_type;
 	struct sprd_dma_desc	*cur_desc;
 };
 
@@ -429,6 +433,9 @@  static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
 		val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
 		val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
 		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_SRC_INT;
+
 		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
 		break;
 
@@ -436,6 +443,9 @@  static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
 		val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
 		val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
 		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_SRC_INT;
+
 		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
 		break;
 
@@ -443,6 +453,9 @@  static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
 		val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
 			SPRD_DMA_GLB_DEST_CHN_MASK;
 		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_DEST_INT;
+
 		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
 		break;
 
@@ -450,6 +463,9 @@  static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
 		val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
 			SPRD_DMA_GLB_DEST_CHN_MASK;
 		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_DEST_INT;
+
 		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
 		break;
 
@@ -911,11 +927,15 @@  static int sprd_dma_fill_linklist_desc(struct dma_chan *chan,
 		schan->linklist.virt_addr = 0;
 	}
 
-	/* Set channel mode and trigger mode for 2-stage transfer */
+	/*
+	 * Set channel mode, interrupt mode and trigger mode for 2-stage
+	 * transfer.
+	 */
 	schan->chn_mode =
 		(flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;
 	schan->trg_mode =
 		(flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;
+	schan->int_type = flags & SPRD_DMA_INT_TYPE_MASK;
 
 	sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
 	if (!sdesc)