diff mbox series

[v2] bus: ti-sysc: Add generic enable/disable functions

Message ID 20190408095239.30378-1-rogerq@ti.com
State New
Headers show
Series [v2] bus: ti-sysc: Add generic enable/disable functions | expand

Commit Message

Roger Quadros April 8, 2019, 9:52 a.m. UTC 
For non legacy cases, add generic sysc_enable_module()
and sysc_disable_module() functions.

Signed-off-by: Roger Quadros <rogerq@ti.com>

---
Boot tested on
- beagle-x15 (AM5728 GP EVM)
- AM571x IDK
- DRA7 EVM

Changelog:
v2:
- Add helper to get best idle mode.
- Add comment about not preventing clockdomain autoidle
  during enable/disable.
- Omit PRU-ICSS specific handling. PRU-ICSS moudle can re-use omap4-simple.
  The STANDBY_INIT and SUB_MWAIT bits are specific to PRUSS application
  usage and should be managed by the PRUSS driver.

cheers,
-roger

 drivers/bus/ti-sysc.c | 129 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 129 insertions(+)

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Comments

Tony Lindgren April 9, 2019, 3:59 p.m. UTC | #1 
* Roger Quadros <rogerq@ti.com> [190408 02:53]:
> For non legacy cases, add generic sysc_enable_module()

> and sysc_disable_module() functions.

> 

> Signed-off-by: Roger Quadros <rogerq@ti.com>

> ---

> Boot tested on

> - beagle-x15 (AM5728 GP EVM)

> - AM571x IDK

> - DRA7 EVM

> 

> Changelog:

> v2:

> - Add helper to get best idle mode.

> - Add comment about not preventing clockdomain autoidle

>   during enable/disable.

> - Omit PRU-ICSS specific handling. PRU-ICSS moudle can re-use omap4-simple.

>   The STANDBY_INIT and SUB_MWAIT bits are specific to PRUSS application

>   usage and should be managed by the PRUSS driver.


Thanks looks good to me, applying into omap-for-v5.2/ti-sysc.

Regards,

Tony
Tony Lindgren April 11, 2019, 4:59 p.m. UTC | #2 
Hi,

* Roger Quadros <rogerq@ti.com> [190408 02:53]:
> For non legacy cases, add generic sysc_enable_module()

> and sysc_disable_module() functions.

...

> - Add helper to get best idle mode.

> - Add comment about not preventing clockdomain autoidle

>   during enable/disable.


FYI I have a patch in works to populate clkdm_deny_idle/allow_idle
via platform data functions for ti-sysc driver for non-legacy
cases.

We still need to figure out what we want to do for cases where a
child device driver needs to manage rstctrl reset driver bits not
related for the module reset. Not sure if we need to call
clkdm_deny_idle/allow_idle for those cases too?

Regards,

Tony
diff mbox series

Patch

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 5c8796276828..c37b3be1e3e2 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -793,6 +793,127 @@  static void sysc_show_registers(struct sysc *ddata)
 		buf);
 }
 
+#define SYSC_IDLE_MASK	(SYSC_NR_IDLEMODES - 1)
+
+static int sysc_enable_module(struct device *dev)
+{
+	struct sysc *ddata;
+	const struct sysc_regbits *regbits;
+	u32 reg, idlemodes, best_mode;
+
+	ddata = dev_get_drvdata(dev);
+	if (ddata->offsets[SYSC_SYSCONFIG] == -ENODEV)
+		return 0;
+
+	/*
+	 * TODO: Need to prevent clockdomain autoidle?
+	 * See clkdm_deny_idle() in arch/mach-omap2/omap_hwmod.c
+	 */
+
+	regbits = ddata->cap->regbits;
+	reg = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
+
+	/* Set SIDLE mode */
+	idlemodes = ddata->cfg.sidlemodes;
+	if (!idlemodes || regbits->sidle_shift < 0)
+		goto set_midle;
+
+	best_mode = fls(ddata->cfg.sidlemodes) - 1;
+	if (best_mode > SYSC_IDLE_MASK) {
+		dev_err(dev, "%s: invalid sidlemode\n", __func__);
+		return -EINVAL;
+	}
+
+	reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift);
+	reg |= best_mode << regbits->sidle_shift;
+	sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
+
+set_midle:
+	/* Set MIDLE mode */
+	idlemodes = ddata->cfg.midlemodes;
+	if (!idlemodes || regbits->midle_shift < 0)
+		return 0;
+
+	best_mode = fls(ddata->cfg.midlemodes) - 1;
+	if (best_mode > SYSC_IDLE_MASK) {
+		dev_err(dev, "%s: invalid midlemode\n", __func__);
+		return -EINVAL;
+	}
+
+	reg &= ~(SYSC_IDLE_MASK << regbits->midle_shift);
+	reg |= best_mode << regbits->midle_shift;
+	sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
+
+	return 0;
+}
+
+static int sysc_best_idle_mode(u32 idlemodes, u32 *best_mode)
+{
+	if (idlemodes & BIT(SYSC_IDLE_SMART_WKUP))
+		*best_mode = SYSC_IDLE_SMART_WKUP;
+	else if (idlemodes & BIT(SYSC_IDLE_SMART))
+		*best_mode = SYSC_IDLE_SMART;
+	else if (idlemodes & SYSC_IDLE_FORCE)
+		*best_mode = SYSC_IDLE_FORCE;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int sysc_disable_module(struct device *dev)
+{
+	struct sysc *ddata;
+	const struct sysc_regbits *regbits;
+	u32 reg, idlemodes, best_mode;
+	int ret;
+
+	ddata = dev_get_drvdata(dev);
+	if (ddata->offsets[SYSC_SYSCONFIG] == -ENODEV)
+		return 0;
+
+	/*
+	 * TODO: Need to prevent clockdomain autoidle?
+	 * See clkdm_deny_idle() in arch/mach-omap2/omap_hwmod.c
+	 */
+
+	regbits = ddata->cap->regbits;
+	reg = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
+
+	/* Set MIDLE mode */
+	idlemodes = ddata->cfg.midlemodes;
+	if (!idlemodes || regbits->midle_shift < 0)
+		goto set_sidle;
+
+	ret = sysc_best_idle_mode(idlemodes, &best_mode);
+	if (ret) {
+		dev_err(dev, "%s: invalid midlemode\n", __func__);
+		return ret;
+	}
+
+	reg &= ~(SYSC_IDLE_MASK << regbits->midle_shift);
+	reg |= best_mode << regbits->midle_shift;
+	sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
+
+set_sidle:
+	/* Set SIDLE mode */
+	idlemodes = ddata->cfg.sidlemodes;
+	if (!idlemodes || regbits->sidle_shift < 0)
+		return 0;
+
+	ret = sysc_best_idle_mode(idlemodes, &best_mode);
+	if (ret) {
+		dev_err(dev, "%s: invalid sidlemode\n", __func__);
+		return ret;
+	}
+
+	reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift);
+	reg |= best_mode << regbits->sidle_shift;
+	sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
+
+	return 0;
+}
+
 static int __maybe_unused sysc_runtime_suspend_legacy(struct device *dev,
 						      struct sysc *ddata)
 {
@@ -849,6 +970,10 @@  static int __maybe_unused sysc_runtime_suspend(struct device *dev)
 		error = sysc_runtime_suspend_legacy(dev, ddata);
 		if (error)
 			return error;
+	} else {
+		error = sysc_disable_module(dev);
+		if (error)
+			return error;
 	}
 
 	sysc_disable_main_clocks(ddata);
@@ -885,6 +1010,10 @@  static int __maybe_unused sysc_runtime_resume(struct device *dev)
 		error = sysc_runtime_resume_legacy(dev, ddata);
 		if (error)
 			goto err_main_clocks;
+	} else {
+		error = sysc_enable_module(dev);
+		if (error)
+			goto err_main_clocks;
 	}
 
 	ddata->enabled = true;