| Message ID | 20190319170003.21261-4-rui.silva@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ARM: imx7s: add media nodes | expand |
On Tue, Mar 19, 2019 at 05:00:01PM +0000, Rui Miguel Silva wrote: > Add device tree nodes for csi, video multiplexer and mipi-csi. > > Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> > --- > arch/arm/boot/dts/imx7s.dtsi | 70 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 70 insertions(+) > > diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi > index 792efcd2caa1..1992e32a9731 100644 > --- a/arch/arm/boot/dts/imx7s.dtsi > +++ b/arch/arm/boot/dts/imx7s.dtsi > @@ -8,6 +8,7 @@ > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/input/input.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/reset/imx7-reset.h> > #include "imx7d-pinfunc.h" > > / { > @@ -506,6 +507,29 @@ > #mux-control-cells = <0>; > mux-reg-masks = <0x14 0x00000010>; > }; > + > + csi_mux { We prefer to use hyphen in the node name. > + compatible = "video-mux"; > + mux-controls = <&mux 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + > + csi_mux_from_mipi_vc0: endpoint { > + remote-endpoint = <&mipi_vc0_to_csi_mux>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + csi_mux_to_csi: endpoint { > + remote-endpoint = <&csi_from_csi_mux>; > + }; > + }; > + }; > }; > > ocotp: ocotp-ctrl@30350000 { > @@ -709,6 +733,23 @@ > status = "disabled"; > }; > > + csi: csi@30710000 { > + compatible = "fsl,imx7-csi"; > + reg = <0x30710000 0x10000>; > + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks IMX7D_CLK_DUMMY>, > + <&clks IMX7D_CSI_MCLK_ROOT_CLK>, > + <&clks IMX7D_CLK_DUMMY>; Please make the indent align with the first line. > + clock-names = "axi", "mclk", "dcic"; > + status = "disabled"; > + > + port { > + csi_from_csi_mux: endpoint { > + remote-endpoint = <&csi_mux_to_csi>; > + }; > + }; > + }; > + > lcdif: lcdif@30730000 { > compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; > reg = <0x30730000 0x10000>; > @@ -718,6 +759,35 @@ > clock-names = "pix", "axi"; > status = "disabled"; > }; > + > + mipi_csi: mipi-csi@30750000 { > + compatible = "fsl,imx7-mipi-csi2"; > + reg = <0x30750000 0x10000>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks IMX7D_IPG_ROOT_CLK>, > + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; Ditto Shawn > + clock-names = "pclk", "wrap", "phy"; > + power-domains = <&pgc_mipi_phy>; > + phy-supply = <®_1p0d>; > + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > + reset-names = "mrst"; > + status = "disabled"; > + > + port@0 { > + reg = <0>; > + }; > + > + port@1 { > + reg = <1>; > + > + mipi_vc0_to_csi_mux: endpoint { > + remote-endpoint = <&csi_mux_from_mipi_vc0>; > + }; > + }; > + }; > }; > > aips3: aips-bus@30800000 { > -- > 2.21.0 >
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 792efcd2caa1..1992e32a9731 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/imx7-reset.h> #include "imx7d-pinfunc.h" / { @@ -506,6 +507,29 @@ #mux-control-cells = <0>; mux-reg-masks = <0x14 0x00000010>; }; + + csi_mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csi_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_csi_mux>; + }; + }; + + port@2 { + reg = <2>; + + csi_mux_to_csi: endpoint { + remote-endpoint = <&csi_from_csi_mux>; + }; + }; + }; }; ocotp: ocotp-ctrl@30350000 { @@ -709,6 +733,23 @@ status = "disabled"; }; + csi: csi@30710000 { + compatible = "fsl,imx7-csi"; + reg = <0x30710000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CSI_MCLK_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "axi", "mclk", "dcic"; + status = "disabled"; + + port { + csi_from_csi_mux: endpoint { + remote-endpoint = <&csi_mux_to_csi>; + }; + }; + }; + lcdif: lcdif@30730000 { compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; reg = <0x30730000 0x10000>; @@ -718,6 +759,35 @@ clock-names = "pix", "axi"; status = "disabled"; }; + + mipi_csi: mipi-csi@30750000 { + compatible = "fsl,imx7-mipi-csi2"; + reg = <0x30750000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "pclk", "wrap", "phy"; + power-domains = <&pgc_mipi_phy>; + phy-supply = <®_1p0d>; + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; + reset-names = "mrst"; + status = "disabled"; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; + }; + }; }; aips3: aips-bus@30800000 {
Add device tree nodes for csi, video multiplexer and mipi-csi. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> --- arch/arm/boot/dts/imx7s.dtsi | 70 ++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) -- 2.21.0