diff mbox series

arm64: dts: freescale: Enable PCI-E controller for Oxalis board

Message ID 20190309023209.6741-1-manivannan.sadhasivam@linaro.org
State Accepted
Commit ee4c12f4390743013029cfe4f895d1becc35880b
Headers show
Series arm64: dts: freescale: Enable PCI-E controller for Oxalis board | expand

Commit Message

Manivannan Sadhasivam March 9, 2019, 2:32 a.m. UTC
Enable PCI-E controller for Oxalis board based on NXP/Freescale LS1012a
SoC available as the Mini PCI-E connector on the bottom side.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

---
 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts | 4 ++++
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi       | 2 +-
 2 files changed, 5 insertions(+), 1 deletion(-)

-- 
2.17.1

Comments

Shawn Guo March 20, 2019, 12:58 p.m. UTC | #1
On Sat, Mar 09, 2019 at 08:02:09AM +0530, Manivannan Sadhasivam wrote:
> Enable PCI-E controller for Oxalis board based on NXP/Freescale LS1012a

> SoC available as the Mini PCI-E connector on the bottom side.

> 

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>


Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
index 760a3e258c96..5f9cde402744 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
@@ -87,6 +87,10 @@ 
 	status = "okay";
 };
 
+&pcie {
+	status = "okay";
+};
+
 &sai2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 816f3a4537e3..d48b0df1da6d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -474,7 +474,7 @@ 
 			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		pcie@3400000 {
+		pcie: pcie@3400000 {
 			compatible = "fsl,ls1012a-pcie";
 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
 			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */