diff mbox series

[10/10] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it

Message ID 20181219124207.13479-11-kishon@ti.com
State Superseded
Headers show
Series PCI: DWC/Keystone: MSI configuration cleanup | expand

Commit Message

Kishon Vijay Abraham I Dec. 19, 2018, 12:42 p.m. UTC
Platforms which populate msi_host_init, has it's own MSI controller
logic. Writing to MSI control registers on platforms which doesn't use
Designware's MSI controller logic might have side effects. To
be safe, do not write to MSI control registers if the platform uses
it's own MSI controller logic instead of Designware's MSI controller
logic.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

---
 .../pci/controller/dwc/pcie-designware-host.c | 24 ++++++++++---------
 1 file changed, 13 insertions(+), 11 deletions(-)

-- 
2.17.1

Comments

Gustavo Pimentel Jan. 2, 2019, 10:13 a.m. UTC | #1
Hi,

On 19/12/2018 12:42, Kishon Vijay Abraham I wrote:
> Platforms which populate msi_host_init, has it's own MSI controller

> logic. Writing to MSI control registers on platforms which doesn't use

> Designware's MSI controller logic might have side effects. To

> be safe, do not write to MSI control registers if the platform uses

> it's own MSI controller logic instead of Designware's MSI controller

> logic.

> 

> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

> ---

>  .../pci/controller/dwc/pcie-designware-host.c | 24 ++++++++++---------

>  1 file changed, 13 insertions(+), 11 deletions(-)

> 

> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c

> index dbc94f3be3d5..6644a5683b2b 100644

> --- a/drivers/pci/controller/dwc/pcie-designware-host.c

> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c

> @@ -647,17 +647,19 @@ void dw_pcie_setup_rc(struct pcie_port *pp)

>  

>  	dw_pcie_setup(pci);

>  

> -	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;

> -

> -	/* Initialize IRQ Status array */

> -	for (ctrl = 0; ctrl < num_ctrls; ctrl++) {

> -		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +

> -					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),

> -				    4, ~0);

> -		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +

> -					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),

> -				    4, ~0);

> -		pp->irq_status[ctrl] = 0;

> +	if (!pp->ops->msi_host_init) {

> +		num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;

> +

> +		/* Initialize IRQ Status array */

> +		for (ctrl = 0; ctrl < num_ctrls; ctrl++) {

> +			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +

> +					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),

> +					    4, ~0);

> +			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +

> +					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),

> +					    4, ~0);

> +			pp->irq_status[ctrl] = 0;

> +		}

>  	}

>  

>  	/* Setup RC BARs */

> 


Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>


Regards,
Gustavo
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index dbc94f3be3d5..6644a5683b2b 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -647,17 +647,19 @@  void dw_pcie_setup_rc(struct pcie_port *pp)
 
 	dw_pcie_setup(pci);
 
-	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
-
-	/* Initialize IRQ Status array */
-	for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
-					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
-				    4, ~0);
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
-					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
-				    4, ~0);
-		pp->irq_status[ctrl] = 0;
+	if (!pp->ops->msi_host_init) {
+		num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
+
+		/* Initialize IRQ Status array */
+		for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
+			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
+					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
+					    4, ~0);
+			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
+					    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
+					    4, ~0);
+			pp->irq_status[ctrl] = 0;
+		}
 	}
 
 	/* Setup RC BARs */