| Message ID | 20181117004524.31851-3-ard.biesheuvel@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | ArmPlatformPkg, ArmVirtPkg: discover NOR flash banks from DTB | expand |
On Fri, 16 Nov 2018 at 16:45, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > > NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg > that are not based on the device tree received from QEMU. > > For ArmVirtQemu, this does not really matter, given that the NOR > flash banks are always the same: the PEI code is linked to execute > in place from flash bank #0, and the fixed varstore PCDs refer to > flash bank #1 directly. > > However, ArmVirtQemuKernel can execute at any offset, and flash bank #0 is configured as secure-only when running with support for EL3 enabled. > In this case, NorFlashQemuLib should not expose the first flash bank > at all. > > To prevent introducing too much internal knowledge about which flash > bank is accessible under which circumstances, let's switch to using > the DTB to decide which flash banks to expose to the NOR flash driver. > > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > --- > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c | 84 +++++++++++++++----- > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf | 12 +++ > 2 files changed, 75 insertions(+), 21 deletions(-) > > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > index e3bbae5b06c5..dc0a15e77170 100644 > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > @@ -1,6 +1,6 @@ > /** @file > > - Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR> > + Copyright (c) 2014-2018, Linaro Ltd. All rights reserved.<BR> > > This program and the accompanying materials > are licensed and made available under the terms and conditions of the BSD License > @@ -12,13 +12,16 @@ > > **/ > > +#include <Library/BaseLib.h> > +#include <Library/DebugLib.h> > #include <Library/NorFlashPlatformLib.h> > +#include <Library/UefiBootServicesTableLib.h> > + > +#include <Protocol/FdtClient.h> > > #define QEMU_NOR_BLOCK_SIZE SIZE_256KB > -#define QEMU_NOR0_BASE 0x0 > -#define QEMU_NOR0_SIZE SIZE_64MB > -#define QEMU_NOR1_BASE 0x04000000 > -#define QEMU_NOR1_SIZE SIZE_64MB > + > +#define MAX_FLASH_BANKS 4 > > EFI_STATUS > NorFlashPlatformInitialization ( > @@ -28,21 +31,7 @@ NorFlashPlatformInitialization ( > return EFI_SUCCESS; > } > > -NOR_FLASH_DESCRIPTION mNorFlashDevices[] = { > - { > - QEMU_NOR0_BASE, > - QEMU_NOR0_BASE, > - QEMU_NOR0_SIZE, > - QEMU_NOR_BLOCK_SIZE, > - {0xF9B94AE2, 0x8BA6, 0x409B, {0x9D, 0x56, 0xB9, 0xB4, 0x17, 0xF5, 0x3C, 0xB3}} > - }, { > - QEMU_NOR1_BASE, > - QEMU_NOR1_BASE, > - QEMU_NOR1_SIZE, > - QEMU_NOR_BLOCK_SIZE, > - {0x8047DB4B, 0x7E9C, 0x4C0C, {0x8E, 0xBC, 0xDF, 0xBB, 0xAA, 0xCA, 0xCE, 0x8F}} > - } > -}; > +NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_BANKS]; > > EFI_STATUS > NorFlashPlatformGetDevices ( > @@ -50,7 +39,60 @@ NorFlashPlatformGetDevices ( > OUT UINT32 *Count > ) > { > + FDT_CLIENT_PROTOCOL *FdtClient; > + INT32 Node; > + EFI_STATUS Status; > + EFI_STATUS FindNodeStatus; > + CONST UINT64 *Reg; > + UINT32 RegSize; > + CONST CHAR8 *NodeStatus; > + UINTN Num; > + > + Status = gBS->LocateProtocol (&gFdtClientProtocolGuid, NULL, > + (VOID **)&FdtClient); > + ASSERT_EFI_ERROR (Status); > + > + Num = 0; > + for (FindNodeStatus = FdtClient->FindCompatibleNode (FdtClient, > + "cfi-flash", &Node); > + !EFI_ERROR (FindNodeStatus); > + FindNodeStatus = FdtClient->FindNextCompatibleNode (FdtClient, > + "cfi-flash", Node, &Node)) { > + > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "status", > + (CONST VOID **)&NodeStatus, NULL); > + if (!EFI_ERROR (Status) && AsciiStrnCmp (NodeStatus, "ok", 2) != 0) { > + continue; > + } > + > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "reg", > + (CONST VOID **)&Reg, &RegSize); > + if (EFI_ERROR (Status)) { > + DEBUG ((EFI_D_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n", > + __FUNCTION__, Status)); > + continue; > + } > + > + ASSERT ((RegSize % (2 * sizeof(UINT64))) == 0); > + > + while (RegSize > 0) { > + mNorFlashDevices[Num].DeviceBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > + mNorFlashDevices[Num].RegionBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > + mNorFlashDevices[Num].Size = (UINTN)SwapBytes64 (Reg[1]); > + mNorFlashDevices[Num].BlockSize = QEMU_NOR_BLOCK_SIZE; > + > + Num++; > + Reg += 2; > + RegSize -= 2 * sizeof(UINT64); > + > + if (Num >= MAX_FLASH_BANKS) { > + goto Finished; > + } > + } > + } > + > +Finished: > *NorFlashDescriptions = mNorFlashDevices; > - *Count = ARRAY_SIZE (mNorFlashDevices); > + *Count = Num; > return EFI_SUCCESS; > } > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > index 126d1671f544..d86ff36dbd58 100644 > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > @@ -28,3 +28,15 @@ > [Packages] > MdePkg/MdePkg.dec > ArmPlatformPkg/ArmPlatformPkg.dec > + ArmVirtPkg/ArmVirtPkg.dec > + > +[LibraryClasses] > + BaseLib > + DebugLib > + UefiBootServicesTableLib > + > +[Protocols] > + gFdtClientProtocolGuid ## CONSUMES > + > +[Depex] > + gFdtClientProtocolGuid > -- > 2.17.1 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On Fri, Nov 16, 2018 at 05:29:05PM -0800, Ard Biesheuvel wrote: > On Fri, 16 Nov 2018 at 16:45, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > > > > NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg > > that are not based on the device tree received from QEMU. > > > > For ArmVirtQemu, this does not really matter, given that the NOR > > flash banks are always the same: the PEI code is linked to execute > > in place from flash bank #0, and the fixed varstore PCDs refer to > > flash bank #1 directly. > > > > However, ArmVirtQemuKernel can execute at any offset, and flash bank > > #0 is configured as secure-only when running with support for EL3 enabled. Never gets old :) > > In this case, NorFlashQemuLib should not expose the first flash bank > > at all. > > > > To prevent introducing too much internal knowledge about which flash > > bank is accessible under which circumstances, let's switch to using > > the DTB to decide which flash banks to expose to the NOR flash driver. Does this mean we as a side effect get rid of the limitation that the pflash image needs to be exactly 64MB. Or does that require further changes on the QEMU side? If it does, please add a comment to the commit message. Either way: Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> / Leif > > > > Contributed-under: TianoCore Contribution Agreement 1.1 > > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > > --- > > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c | 84 +++++++++++++++----- > > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf | 12 +++ > > 2 files changed, 75 insertions(+), 21 deletions(-) > > > > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > index e3bbae5b06c5..dc0a15e77170 100644 > > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > @@ -1,6 +1,6 @@ > > /** @file > > > > - Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR> > > + Copyright (c) 2014-2018, Linaro Ltd. All rights reserved.<BR> > > > > This program and the accompanying materials > > are licensed and made available under the terms and conditions of the BSD License > > @@ -12,13 +12,16 @@ > > > > **/ > > > > +#include <Library/BaseLib.h> > > +#include <Library/DebugLib.h> > > #include <Library/NorFlashPlatformLib.h> > > +#include <Library/UefiBootServicesTableLib.h> > > + > > +#include <Protocol/FdtClient.h> > > > > #define QEMU_NOR_BLOCK_SIZE SIZE_256KB > > -#define QEMU_NOR0_BASE 0x0 > > -#define QEMU_NOR0_SIZE SIZE_64MB > > -#define QEMU_NOR1_BASE 0x04000000 > > -#define QEMU_NOR1_SIZE SIZE_64MB > > + > > +#define MAX_FLASH_BANKS 4 > > > > EFI_STATUS > > NorFlashPlatformInitialization ( > > @@ -28,21 +31,7 @@ NorFlashPlatformInitialization ( > > return EFI_SUCCESS; > > } > > > > -NOR_FLASH_DESCRIPTION mNorFlashDevices[] = { > > - { > > - QEMU_NOR0_BASE, > > - QEMU_NOR0_BASE, > > - QEMU_NOR0_SIZE, > > - QEMU_NOR_BLOCK_SIZE, > > - {0xF9B94AE2, 0x8BA6, 0x409B, {0x9D, 0x56, 0xB9, 0xB4, 0x17, 0xF5, 0x3C, 0xB3}} > > - }, { > > - QEMU_NOR1_BASE, > > - QEMU_NOR1_BASE, > > - QEMU_NOR1_SIZE, > > - QEMU_NOR_BLOCK_SIZE, > > - {0x8047DB4B, 0x7E9C, 0x4C0C, {0x8E, 0xBC, 0xDF, 0xBB, 0xAA, 0xCA, 0xCE, 0x8F}} > > - } > > -}; > > +NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_BANKS]; > > > > EFI_STATUS > > NorFlashPlatformGetDevices ( > > @@ -50,7 +39,60 @@ NorFlashPlatformGetDevices ( > > OUT UINT32 *Count > > ) > > { > > + FDT_CLIENT_PROTOCOL *FdtClient; > > + INT32 Node; > > + EFI_STATUS Status; > > + EFI_STATUS FindNodeStatus; > > + CONST UINT64 *Reg; > > + UINT32 RegSize; > > + CONST CHAR8 *NodeStatus; > > + UINTN Num; > > + > > + Status = gBS->LocateProtocol (&gFdtClientProtocolGuid, NULL, > > + (VOID **)&FdtClient); > > + ASSERT_EFI_ERROR (Status); > > + > > + Num = 0; > > + for (FindNodeStatus = FdtClient->FindCompatibleNode (FdtClient, > > + "cfi-flash", &Node); > > + !EFI_ERROR (FindNodeStatus); > > + FindNodeStatus = FdtClient->FindNextCompatibleNode (FdtClient, > > + "cfi-flash", Node, &Node)) { > > + > > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "status", > > + (CONST VOID **)&NodeStatus, NULL); > > + if (!EFI_ERROR (Status) && AsciiStrnCmp (NodeStatus, "ok", 2) != 0) { > > + continue; > > + } > > + > > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "reg", > > + (CONST VOID **)&Reg, &RegSize); > > + if (EFI_ERROR (Status)) { > > + DEBUG ((EFI_D_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n", > > + __FUNCTION__, Status)); > > + continue; > > + } > > + > > + ASSERT ((RegSize % (2 * sizeof(UINT64))) == 0); > > + > > + while (RegSize > 0) { > > + mNorFlashDevices[Num].DeviceBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > > + mNorFlashDevices[Num].RegionBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > > + mNorFlashDevices[Num].Size = (UINTN)SwapBytes64 (Reg[1]); > > + mNorFlashDevices[Num].BlockSize = QEMU_NOR_BLOCK_SIZE; > > + > > + Num++; > > + Reg += 2; > > + RegSize -= 2 * sizeof(UINT64); > > + > > + if (Num >= MAX_FLASH_BANKS) { > > + goto Finished; > > + } > > + } > > + } > > + > > +Finished: > > *NorFlashDescriptions = mNorFlashDevices; > > - *Count = ARRAY_SIZE (mNorFlashDevices); > > + *Count = Num; > > return EFI_SUCCESS; > > } > > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > index 126d1671f544..d86ff36dbd58 100644 > > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > @@ -28,3 +28,15 @@ > > [Packages] > > MdePkg/MdePkg.dec > > ArmPlatformPkg/ArmPlatformPkg.dec > > + ArmVirtPkg/ArmVirtPkg.dec > > + > > +[LibraryClasses] > > + BaseLib > > + DebugLib > > + UefiBootServicesTableLib > > + > > +[Protocols] > > + gFdtClientProtocolGuid ## CONSUMES > > + > > +[Depex] > > + gFdtClientProtocolGuid > > -- > > 2.17.1 > > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On Mon, 19 Nov 2018 at 11:10, Leif Lindholm <leif.lindholm@linaro.org> wrote: > > On Fri, Nov 16, 2018 at 05:29:05PM -0800, Ard Biesheuvel wrote: > > On Fri, 16 Nov 2018 at 16:45, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > > > > > > NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg > > > that are not based on the device tree received from QEMU. > > > > > > For ArmVirtQemu, this does not really matter, given that the NOR > > > flash banks are always the same: the PEI code is linked to execute > > > in place from flash bank #0, and the fixed varstore PCDs refer to > > > flash bank #1 directly. > > > > > > However, ArmVirtQemuKernel can execute at any offset, and flash bank > > > > #0 is configured as secure-only when running with support for EL3 enabled. > > Never gets old :) > No this is entirely reasonable: it makes perfect sense for a NOR flash at address 0x0 to be secure only on a system that implements EL3, since mach-virt's default reset vector is 0x0. > > > In this case, NorFlashQemuLib should not expose the first flash bank > > > at all. > > > > > > To prevent introducing too much internal knowledge about which flash > > > bank is accessible under which circumstances, let's switch to using > > > the DTB to decide which flash banks to expose to the NOR flash driver. > > Does this mean we as a side effect get rid of the limitation that the > pflash image needs to be exactly 64MB. Or does that require further > changes on the QEMU side? > No that is a QEMU thing. > If it does, please add a comment to the commit message. > Either way: > Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> > Thanks > > > > > > Contributed-under: TianoCore Contribution Agreement 1.1 > > > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > > > --- > > > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c | 84 +++++++++++++++----- > > > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf | 12 +++ > > > 2 files changed, 75 insertions(+), 21 deletions(-) > > > > > > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > > index e3bbae5b06c5..dc0a15e77170 100644 > > > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > > @@ -1,6 +1,6 @@ > > > /** @file > > > > > > - Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR> > > > + Copyright (c) 2014-2018, Linaro Ltd. All rights reserved.<BR> > > > > > > This program and the accompanying materials > > > are licensed and made available under the terms and conditions of the BSD License > > > @@ -12,13 +12,16 @@ > > > > > > **/ > > > > > > +#include <Library/BaseLib.h> > > > +#include <Library/DebugLib.h> > > > #include <Library/NorFlashPlatformLib.h> > > > +#include <Library/UefiBootServicesTableLib.h> > > > + > > > +#include <Protocol/FdtClient.h> > > > > > > #define QEMU_NOR_BLOCK_SIZE SIZE_256KB > > > -#define QEMU_NOR0_BASE 0x0 > > > -#define QEMU_NOR0_SIZE SIZE_64MB > > > -#define QEMU_NOR1_BASE 0x04000000 > > > -#define QEMU_NOR1_SIZE SIZE_64MB > > > + > > > +#define MAX_FLASH_BANKS 4 > > > > > > EFI_STATUS > > > NorFlashPlatformInitialization ( > > > @@ -28,21 +31,7 @@ NorFlashPlatformInitialization ( > > > return EFI_SUCCESS; > > > } > > > > > > -NOR_FLASH_DESCRIPTION mNorFlashDevices[] = { > > > - { > > > - QEMU_NOR0_BASE, > > > - QEMU_NOR0_BASE, > > > - QEMU_NOR0_SIZE, > > > - QEMU_NOR_BLOCK_SIZE, > > > - {0xF9B94AE2, 0x8BA6, 0x409B, {0x9D, 0x56, 0xB9, 0xB4, 0x17, 0xF5, 0x3C, 0xB3}} > > > - }, { > > > - QEMU_NOR1_BASE, > > > - QEMU_NOR1_BASE, > > > - QEMU_NOR1_SIZE, > > > - QEMU_NOR_BLOCK_SIZE, > > > - {0x8047DB4B, 0x7E9C, 0x4C0C, {0x8E, 0xBC, 0xDF, 0xBB, 0xAA, 0xCA, 0xCE, 0x8F}} > > > - } > > > -}; > > > +NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_BANKS]; > > > > > > EFI_STATUS > > > NorFlashPlatformGetDevices ( > > > @@ -50,7 +39,60 @@ NorFlashPlatformGetDevices ( > > > OUT UINT32 *Count > > > ) > > > { > > > + FDT_CLIENT_PROTOCOL *FdtClient; > > > + INT32 Node; > > > + EFI_STATUS Status; > > > + EFI_STATUS FindNodeStatus; > > > + CONST UINT64 *Reg; > > > + UINT32 RegSize; > > > + CONST CHAR8 *NodeStatus; > > > + UINTN Num; > > > + > > > + Status = gBS->LocateProtocol (&gFdtClientProtocolGuid, NULL, > > > + (VOID **)&FdtClient); > > > + ASSERT_EFI_ERROR (Status); > > > + > > > + Num = 0; > > > + for (FindNodeStatus = FdtClient->FindCompatibleNode (FdtClient, > > > + "cfi-flash", &Node); > > > + !EFI_ERROR (FindNodeStatus); > > > + FindNodeStatus = FdtClient->FindNextCompatibleNode (FdtClient, > > > + "cfi-flash", Node, &Node)) { > > > + > > > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "status", > > > + (CONST VOID **)&NodeStatus, NULL); > > > + if (!EFI_ERROR (Status) && AsciiStrnCmp (NodeStatus, "ok", 2) != 0) { > > > + continue; > > > + } > > > + > > > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "reg", > > > + (CONST VOID **)&Reg, &RegSize); > > > + if (EFI_ERROR (Status)) { > > > + DEBUG ((EFI_D_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n", > > > + __FUNCTION__, Status)); > > > + continue; > > > + } > > > + > > > + ASSERT ((RegSize % (2 * sizeof(UINT64))) == 0); > > > + > > > + while (RegSize > 0) { > > > + mNorFlashDevices[Num].DeviceBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > > > + mNorFlashDevices[Num].RegionBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > > > + mNorFlashDevices[Num].Size = (UINTN)SwapBytes64 (Reg[1]); > > > + mNorFlashDevices[Num].BlockSize = QEMU_NOR_BLOCK_SIZE; > > > + > > > + Num++; > > > + Reg += 2; > > > + RegSize -= 2 * sizeof(UINT64); > > > + > > > + if (Num >= MAX_FLASH_BANKS) { > > > + goto Finished; > > > + } > > > + } > > > + } > > > + > > > +Finished: > > > *NorFlashDescriptions = mNorFlashDevices; > > > - *Count = ARRAY_SIZE (mNorFlashDevices); > > > + *Count = Num; > > > return EFI_SUCCESS; > > > } > > > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > > index 126d1671f544..d86ff36dbd58 100644 > > > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > > @@ -28,3 +28,15 @@ > > > [Packages] > > > MdePkg/MdePkg.dec > > > ArmPlatformPkg/ArmPlatformPkg.dec > > > + ArmVirtPkg/ArmVirtPkg.dec > > > + > > > +[LibraryClasses] > > > + BaseLib > > > + DebugLib > > > + UefiBootServicesTableLib > > > + > > > +[Protocols] > > > + gFdtClientProtocolGuid ## CONSUMES > > > + > > > +[Depex] > > > + gFdtClientProtocolGuid > > > -- > > > 2.17.1 > > > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On Mon, Nov 19, 2018 at 11:16:09AM -0800, Ard Biesheuvel wrote: > On Mon, 19 Nov 2018 at 11:10, Leif Lindholm <leif.lindholm@linaro.org> wrote: > > > > On Fri, Nov 16, 2018 at 05:29:05PM -0800, Ard Biesheuvel wrote: > > > On Fri, 16 Nov 2018 at 16:45, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > > > > > > > > NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg > > > > that are not based on the device tree received from QEMU. > > > > > > > > For ArmVirtQemu, this does not really matter, given that the NOR > > > > flash banks are always the same: the PEI code is linked to execute > > > > in place from flash bank #0, and the fixed varstore PCDs refer to > > > > flash bank #1 directly. > > > > > > > > However, ArmVirtQemuKernel can execute at any offset, and flash bank > > > > > > #0 is configured as secure-only when running with support for EL3 enabled. > > > > Never gets old :) > > No this is entirely reasonable: it makes perfect sense for a NOR flash > at address 0x0 to be secure only on a system that implements EL3, > since mach-virt's default reset vector is 0x0. *cough* sorry, I was referring to the leading #. > > > > In this case, NorFlashQemuLib should not expose the first flash bank > > > > at all. > > > > > > > > To prevent introducing too much internal knowledge about which flash > > > > bank is accessible under which circumstances, let's switch to using > > > > the DTB to decide which flash banks to expose to the NOR flash driver. > > > > Does this mean we as a side effect get rid of the limitation that the > > pflash image needs to be exactly 64MB. Or does that require further > > changes on the QEMU side? > > No that is a QEMU thing. OK, thanks for confirming. But this should mean that we don't need any changes on the guest sides if/when we do fix this in QEMU? / Leif > > If it does, please add a comment to the commit message. > > Either way: > > Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> > > > > Thanks > > > > > > > > > Contributed-under: TianoCore Contribution Agreement 1.1 > > > > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > > > > --- > > > > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c | 84 +++++++++++++++----- > > > > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf | 12 +++ > > > > 2 files changed, 75 insertions(+), 21 deletions(-) > > > > > > > > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > > > index e3bbae5b06c5..dc0a15e77170 100644 > > > > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > > > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > > > @@ -1,6 +1,6 @@ > > > > /** @file > > > > > > > > - Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR> > > > > + Copyright (c) 2014-2018, Linaro Ltd. All rights reserved.<BR> > > > > > > > > This program and the accompanying materials > > > > are licensed and made available under the terms and conditions of the BSD License > > > > @@ -12,13 +12,16 @@ > > > > > > > > **/ > > > > > > > > +#include <Library/BaseLib.h> > > > > +#include <Library/DebugLib.h> > > > > #include <Library/NorFlashPlatformLib.h> > > > > +#include <Library/UefiBootServicesTableLib.h> > > > > + > > > > +#include <Protocol/FdtClient.h> > > > > > > > > #define QEMU_NOR_BLOCK_SIZE SIZE_256KB > > > > -#define QEMU_NOR0_BASE 0x0 > > > > -#define QEMU_NOR0_SIZE SIZE_64MB > > > > -#define QEMU_NOR1_BASE 0x04000000 > > > > -#define QEMU_NOR1_SIZE SIZE_64MB > > > > + > > > > +#define MAX_FLASH_BANKS 4 > > > > > > > > EFI_STATUS > > > > NorFlashPlatformInitialization ( > > > > @@ -28,21 +31,7 @@ NorFlashPlatformInitialization ( > > > > return EFI_SUCCESS; > > > > } > > > > > > > > -NOR_FLASH_DESCRIPTION mNorFlashDevices[] = { > > > > - { > > > > - QEMU_NOR0_BASE, > > > > - QEMU_NOR0_BASE, > > > > - QEMU_NOR0_SIZE, > > > > - QEMU_NOR_BLOCK_SIZE, > > > > - {0xF9B94AE2, 0x8BA6, 0x409B, {0x9D, 0x56, 0xB9, 0xB4, 0x17, 0xF5, 0x3C, 0xB3}} > > > > - }, { > > > > - QEMU_NOR1_BASE, > > > > - QEMU_NOR1_BASE, > > > > - QEMU_NOR1_SIZE, > > > > - QEMU_NOR_BLOCK_SIZE, > > > > - {0x8047DB4B, 0x7E9C, 0x4C0C, {0x8E, 0xBC, 0xDF, 0xBB, 0xAA, 0xCA, 0xCE, 0x8F}} > > > > - } > > > > -}; > > > > +NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_BANKS]; > > > > > > > > EFI_STATUS > > > > NorFlashPlatformGetDevices ( > > > > @@ -50,7 +39,60 @@ NorFlashPlatformGetDevices ( > > > > OUT UINT32 *Count > > > > ) > > > > { > > > > + FDT_CLIENT_PROTOCOL *FdtClient; > > > > + INT32 Node; > > > > + EFI_STATUS Status; > > > > + EFI_STATUS FindNodeStatus; > > > > + CONST UINT64 *Reg; > > > > + UINT32 RegSize; > > > > + CONST CHAR8 *NodeStatus; > > > > + UINTN Num; > > > > + > > > > + Status = gBS->LocateProtocol (&gFdtClientProtocolGuid, NULL, > > > > + (VOID **)&FdtClient); > > > > + ASSERT_EFI_ERROR (Status); > > > > + > > > > + Num = 0; > > > > + for (FindNodeStatus = FdtClient->FindCompatibleNode (FdtClient, > > > > + "cfi-flash", &Node); > > > > + !EFI_ERROR (FindNodeStatus); > > > > + FindNodeStatus = FdtClient->FindNextCompatibleNode (FdtClient, > > > > + "cfi-flash", Node, &Node)) { > > > > + > > > > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "status", > > > > + (CONST VOID **)&NodeStatus, NULL); > > > > + if (!EFI_ERROR (Status) && AsciiStrnCmp (NodeStatus, "ok", 2) != 0) { > > > > + continue; > > > > + } > > > > + > > > > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "reg", > > > > + (CONST VOID **)&Reg, &RegSize); > > > > + if (EFI_ERROR (Status)) { > > > > + DEBUG ((EFI_D_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n", > > > > + __FUNCTION__, Status)); > > > > + continue; > > > > + } > > > > + > > > > + ASSERT ((RegSize % (2 * sizeof(UINT64))) == 0); > > > > + > > > > + while (RegSize > 0) { > > > > + mNorFlashDevices[Num].DeviceBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > > > > + mNorFlashDevices[Num].RegionBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > > > > + mNorFlashDevices[Num].Size = (UINTN)SwapBytes64 (Reg[1]); > > > > + mNorFlashDevices[Num].BlockSize = QEMU_NOR_BLOCK_SIZE; > > > > + > > > > + Num++; > > > > + Reg += 2; > > > > + RegSize -= 2 * sizeof(UINT64); > > > > + > > > > + if (Num >= MAX_FLASH_BANKS) { > > > > + goto Finished; > > > > + } > > > > + } > > > > + } > > > > + > > > > +Finished: > > > > *NorFlashDescriptions = mNorFlashDevices; > > > > - *Count = ARRAY_SIZE (mNorFlashDevices); > > > > + *Count = Num; > > > > return EFI_SUCCESS; > > > > } > > > > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > > > index 126d1671f544..d86ff36dbd58 100644 > > > > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > > > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > > > @@ -28,3 +28,15 @@ > > > > [Packages] > > > > MdePkg/MdePkg.dec > > > > ArmPlatformPkg/ArmPlatformPkg.dec > > > > + ArmVirtPkg/ArmVirtPkg.dec > > > > + > > > > +[LibraryClasses] > > > > + BaseLib > > > > + DebugLib > > > > + UefiBootServicesTableLib > > > > + > > > > +[Protocols] > > > > + gFdtClientProtocolGuid ## CONSUMES > > > > + > > > > +[Depex] > > > > + gFdtClientProtocolGuid > > > > -- > > > > 2.17.1 > > > > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On Mon, 19 Nov 2018 at 11:24, Leif Lindholm <leif.lindholm@linaro.org> wrote: > > > On Mon, Nov 19, 2018 at 11:16:09AM -0800, Ard Biesheuvel wrote: > > On Mon, 19 Nov 2018 at 11:10, Leif Lindholm <leif.lindholm@linaro.org> wrote: > > > > > > On Fri, Nov 16, 2018 at 05:29:05PM -0800, Ard Biesheuvel wrote: > > > > On Fri, 16 Nov 2018 at 16:45, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > > > > > > > > > > NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg > > > > > that are not based on the device tree received from QEMU. > > > > > > > > > > For ArmVirtQemu, this does not really matter, given that the NOR > > > > > flash banks are always the same: the PEI code is linked to execute > > > > > in place from flash bank #0, and the fixed varstore PCDs refer to > > > > > flash bank #1 directly. > > > > > > > > > > However, ArmVirtQemuKernel can execute at any offset, and flash bank > > > > > > > > #0 is configured as secure-only when running with support for EL3 enabled. > > > > > > Never gets old :) > > > > No this is entirely reasonable: it makes perfect sense for a NOR flash > > at address 0x0 to be secure only on a system that implements EL3, > > since mach-virt's default reset vector is 0x0. > > *cough* sorry, I was referring to the leading #. > Ah yes :-) Been caught by that a couple of times already. > > > > > In this case, NorFlashQemuLib should not expose the first flash bank > > > > > at all. > > > > > > > > > > To prevent introducing too much internal knowledge about which flash > > > > > bank is accessible under which circumstances, let's switch to using > > > > > the DTB to decide which flash banks to expose to the NOR flash driver. > > > > > > Does this mean we as a side effect get rid of the limitation that the > > > pflash image needs to be exactly 64MB. Or does that require further > > > changes on the QEMU side? > > > > No that is a QEMU thing. > > OK, thanks for confirming. > But this should mean that we don't need any changes on the guest sides > if/when we do fix this in QEMU? > This would indeed get rid of any discrepancies between what QEMU exposes and what the firmware assumes, so yes, it's an improvement in that sense. However, I don't think the QEMU side of this is likely to change any time soon. _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On Mon, Nov 19, 2018 at 11:27:22AM -0800, Ard Biesheuvel wrote: > > > > > > In this case, NorFlashQemuLib should not expose the first flash bank > > > > > > at all. > > > > > > > > > > > > To prevent introducing too much internal knowledge about which flash > > > > > > bank is accessible under which circumstances, let's switch to using > > > > > > the DTB to decide which flash banks to expose to the NOR flash driver. > > > > > > > > Does this mean we as a side effect get rid of the limitation that the > > > > pflash image needs to be exactly 64MB. Or does that require further > > > > changes on the QEMU side? > > > > > > No that is a QEMU thing. > > > > OK, thanks for confirming. > > But this should mean that we don't need any changes on the guest sides > > if/when we do fix this in QEMU? > > This would indeed get rid of any discrepancies between what QEMU > exposes and what the firmware assumes, so yes, it's an improvement in > that sense. However, I don't think the QEMU side of this is likely to > change any time soon. Sure. But it does decrease the amount of reward delay required for someone to consider having a look at it :) Thanks! / Leif _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 11/17/18 01:45, Ard Biesheuvel wrote: > NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg > that are not based on the device tree received from QEMU. > > For ArmVirtQemu, this does not really matter, given that the NOR > flash banks are always the same: the PEI code is linked to execute > in place from flash bank #0, and the fixed varstore PCDs refer to > flash bank #1 directly. > > However, ArmVirtQemuKernel can execute at any offset, and flash bank > In this case, NorFlashQemuLib should not expose the first flash bank > at all. > > To prevent introducing too much internal knowledge about which flash > bank is accessible under which circumstances, let's switch to using > the DTB to decide which flash banks to expose to the NOR flash driver. > > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > --- > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c | 84 +++++++++++++++----- > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf | 12 +++ > 2 files changed, 75 insertions(+), 21 deletions(-) > > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > index e3bbae5b06c5..dc0a15e77170 100644 > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > @@ -1,6 +1,6 @@ > /** @file > > - Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR> > + Copyright (c) 2014-2018, Linaro Ltd. All rights reserved.<BR> > > This program and the accompanying materials > are licensed and made available under the terms and conditions of the BSD License > @@ -12,13 +12,16 @@ > > **/ > > +#include <Library/BaseLib.h> > +#include <Library/DebugLib.h> > #include <Library/NorFlashPlatformLib.h> > +#include <Library/UefiBootServicesTableLib.h> > + > +#include <Protocol/FdtClient.h> > > #define QEMU_NOR_BLOCK_SIZE SIZE_256KB > -#define QEMU_NOR0_BASE 0x0 > -#define QEMU_NOR0_SIZE SIZE_64MB > -#define QEMU_NOR1_BASE 0x04000000 > -#define QEMU_NOR1_SIZE SIZE_64MB > + > +#define MAX_FLASH_BANKS 4 > > EFI_STATUS > NorFlashPlatformInitialization ( > @@ -28,21 +31,7 @@ NorFlashPlatformInitialization ( > return EFI_SUCCESS; > } > > -NOR_FLASH_DESCRIPTION mNorFlashDevices[] = { > - { > - QEMU_NOR0_BASE, > - QEMU_NOR0_BASE, > - QEMU_NOR0_SIZE, > - QEMU_NOR_BLOCK_SIZE, > - {0xF9B94AE2, 0x8BA6, 0x409B, {0x9D, 0x56, 0xB9, 0xB4, 0x17, 0xF5, 0x3C, 0xB3}} > - }, { > - QEMU_NOR1_BASE, > - QEMU_NOR1_BASE, > - QEMU_NOR1_SIZE, > - QEMU_NOR_BLOCK_SIZE, > - {0x8047DB4B, 0x7E9C, 0x4C0C, {0x8E, 0xBC, 0xDF, 0xBB, 0xAA, 0xCA, 0xCE, 0x8F}} > - } > -}; > +NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_BANKS]; > > EFI_STATUS > NorFlashPlatformGetDevices ( > @@ -50,7 +39,60 @@ NorFlashPlatformGetDevices ( > OUT UINT32 *Count > ) > { > + FDT_CLIENT_PROTOCOL *FdtClient; > + INT32 Node; > + EFI_STATUS Status; > + EFI_STATUS FindNodeStatus; > + CONST UINT64 *Reg; > + UINT32 RegSize; > + CONST CHAR8 *NodeStatus; > + UINTN Num; > + > + Status = gBS->LocateProtocol (&gFdtClientProtocolGuid, NULL, > + (VOID **)&FdtClient); > + ASSERT_EFI_ERROR (Status); > + > + Num = 0; > + for (FindNodeStatus = FdtClient->FindCompatibleNode (FdtClient, > + "cfi-flash", &Node); > + !EFI_ERROR (FindNodeStatus); > + FindNodeStatus = FdtClient->FindNextCompatibleNode (FdtClient, > + "cfi-flash", Node, &Node)) { > + > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "status", > + (CONST VOID **)&NodeStatus, NULL); > + if (!EFI_ERROR (Status) && AsciiStrnCmp (NodeStatus, "ok", 2) != 0) { > + continue; > + } (1) Do you intend to silently continue if the "status" property is missing? (2) Assuming the "status" property exists, I think we could improve the comparison against "ok". Can you allow GetNodeProperty() to output PropSize as well? And then, if (!EFI_ERROR (Status) && AsciiStrnCmp (NodeStatus, "ok", PropSize) != 0) { continue; } Because, if the status property is guaranteed to be NUL-terminated, then we don't need AsciiStrnCmp(), we can use AsciiStrCmp() -- because both strings are NUL-terminated. Or else, if we want to be careful about the property (yes, we should be), then we should pass PropSize to AsciiStrnCmp(). (Or maybe PropSize-1, dependent on libfdt...) Either way it bothers me that in theory, the status property can be shorter than 2 chars, it may not be NUL-terminated, and we pass constant 2 to AsciiStrnCmp(). I'm OK if we use an ASSERT() rather than an "if", in some of the above. > + > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "reg", > + (CONST VOID **)&Reg, &RegSize); > + if (EFI_ERROR (Status)) { > + DEBUG ((EFI_D_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n", > + __FUNCTION__, Status)); > + continue; > + } (3) We should say DEBUG_ERROR in new code. > + > + ASSERT ((RegSize % (2 * sizeof(UINT64))) == 0); (4) Please add a space after the sizeof operator. > + > + while (RegSize > 0) { > + mNorFlashDevices[Num].DeviceBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > + mNorFlashDevices[Num].RegionBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > + mNorFlashDevices[Num].Size = (UINTN)SwapBytes64 (Reg[1]); > + mNorFlashDevices[Num].BlockSize = QEMU_NOR_BLOCK_SIZE; > + > + Num++; > + Reg += 2; > + RegSize -= 2 * sizeof(UINT64); (5) Same as (4). > + > + if (Num >= MAX_FLASH_BANKS) { > + goto Finished; > + } > + } > + } > + > +Finished: (6) Can you replace the "goto" with an additional restriction, added to both loop's controlling expressions, namely (Num < MAX_FLASH_BANKS)? I understand the appeal of the "goto", but "Finished" is not an error handling label. If you disagree, I won't insist. > *NorFlashDescriptions = mNorFlashDevices; > - *Count = ARRAY_SIZE (mNorFlashDevices); > + *Count = Num; (7) *Count has type UINT32; I suggest changing Num to UINT32 as well. If you disagree, I won't insist; I do realize ARRAY_SIZE() used to produce an UINTN as well. :/ > return EFI_SUCCESS; > } > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > index 126d1671f544..d86ff36dbd58 100644 > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > @@ -28,3 +28,15 @@ > [Packages] > MdePkg/MdePkg.dec > ArmPlatformPkg/ArmPlatformPkg.dec > + ArmVirtPkg/ArmVirtPkg.dec > + > +[LibraryClasses] > + BaseLib > + DebugLib > + UefiBootServicesTableLib > + > +[Protocols] > + gFdtClientProtocolGuid ## CONSUMES > + > +[Depex] > + gFdtClientProtocolGuid > Thanks for writing these patches! Laszlo _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On Mon, 19 Nov 2018 at 12:02, Laszlo Ersek <lersek@redhat.com> wrote: > > On 11/17/18 01:45, Ard Biesheuvel wrote: > > NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg > > that are not based on the device tree received from QEMU. > > > > For ArmVirtQemu, this does not really matter, given that the NOR > > flash banks are always the same: the PEI code is linked to execute > > in place from flash bank #0, and the fixed varstore PCDs refer to > > flash bank #1 directly. > > > > However, ArmVirtQemuKernel can execute at any offset, and flash bank > > In this case, NorFlashQemuLib should not expose the first flash bank > > at all. > > > > To prevent introducing too much internal knowledge about which flash > > bank is accessible under which circumstances, let's switch to using > > the DTB to decide which flash banks to expose to the NOR flash driver. > > > > Contributed-under: TianoCore Contribution Agreement 1.1 > > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > > --- > > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c | 84 +++++++++++++++----- > > ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf | 12 +++ > > 2 files changed, 75 insertions(+), 21 deletions(-) > > > > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > index e3bbae5b06c5..dc0a15e77170 100644 > > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c > > @@ -1,6 +1,6 @@ > > /** @file > > > > - Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR> > > + Copyright (c) 2014-2018, Linaro Ltd. All rights reserved.<BR> > > > > This program and the accompanying materials > > are licensed and made available under the terms and conditions of the BSD License > > @@ -12,13 +12,16 @@ > > > > **/ > > > > +#include <Library/BaseLib.h> > > +#include <Library/DebugLib.h> > > #include <Library/NorFlashPlatformLib.h> > > +#include <Library/UefiBootServicesTableLib.h> > > + > > +#include <Protocol/FdtClient.h> > > > > #define QEMU_NOR_BLOCK_SIZE SIZE_256KB > > -#define QEMU_NOR0_BASE 0x0 > > -#define QEMU_NOR0_SIZE SIZE_64MB > > -#define QEMU_NOR1_BASE 0x04000000 > > -#define QEMU_NOR1_SIZE SIZE_64MB > > + > > +#define MAX_FLASH_BANKS 4 > > > > EFI_STATUS > > NorFlashPlatformInitialization ( > > @@ -28,21 +31,7 @@ NorFlashPlatformInitialization ( > > return EFI_SUCCESS; > > } > > > > -NOR_FLASH_DESCRIPTION mNorFlashDevices[] = { > > - { > > - QEMU_NOR0_BASE, > > - QEMU_NOR0_BASE, > > - QEMU_NOR0_SIZE, > > - QEMU_NOR_BLOCK_SIZE, > > - {0xF9B94AE2, 0x8BA6, 0x409B, {0x9D, 0x56, 0xB9, 0xB4, 0x17, 0xF5, 0x3C, 0xB3}} > > - }, { > > - QEMU_NOR1_BASE, > > - QEMU_NOR1_BASE, > > - QEMU_NOR1_SIZE, > > - QEMU_NOR_BLOCK_SIZE, > > - {0x8047DB4B, 0x7E9C, 0x4C0C, {0x8E, 0xBC, 0xDF, 0xBB, 0xAA, 0xCA, 0xCE, 0x8F}} > > - } > > -}; > > +NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_BANKS]; > > > > EFI_STATUS > > NorFlashPlatformGetDevices ( > > @@ -50,7 +39,60 @@ NorFlashPlatformGetDevices ( > > OUT UINT32 *Count > > ) > > { > > + FDT_CLIENT_PROTOCOL *FdtClient; > > + INT32 Node; > > + EFI_STATUS Status; > > + EFI_STATUS FindNodeStatus; > > + CONST UINT64 *Reg; > > + UINT32 RegSize; > > + CONST CHAR8 *NodeStatus; > > + UINTN Num; > > + > > + Status = gBS->LocateProtocol (&gFdtClientProtocolGuid, NULL, > > + (VOID **)&FdtClient); > > + ASSERT_EFI_ERROR (Status); > > + > > + Num = 0; > > + for (FindNodeStatus = FdtClient->FindCompatibleNode (FdtClient, > > + "cfi-flash", &Node); > > + !EFI_ERROR (FindNodeStatus); > > + FindNodeStatus = FdtClient->FindNextCompatibleNode (FdtClient, > > + "cfi-flash", Node, &Node)) { > > + > > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "status", > > + (CONST VOID **)&NodeStatus, NULL); > > + if (!EFI_ERROR (Status) && AsciiStrnCmp (NodeStatus, "ok", 2) != 0) { > > + continue; > > + } > > (1) Do you intend to silently continue if the "status" property is missing? > Yes. Absent implies 'ok' > (2) Assuming the "status" property exists, I think we could improve the > comparison against "ok". Can you allow GetNodeProperty() to output > PropSize as well? And then, > > if (!EFI_ERROR (Status) && > AsciiStrnCmp (NodeStatus, "ok", PropSize) != 0) { > continue; > } > > Because, if the status property is guaranteed to be NUL-terminated, then > we don't need AsciiStrnCmp(), we can use AsciiStrCmp() -- because both > strings are NUL-terminated. Or else, if we want to be careful about the > property (yes, we should be), then we should pass PropSize to > AsciiStrnCmp(). (Or maybe PropSize-1, dependent on libfdt...) > > Either way it bothers me that in theory, the status property can be > shorter than 2 chars, it may not be NUL-terminated, and we pass constant > 2 to AsciiStrnCmp(). > > I'm OK if we use an ASSERT() rather than an "if", in some of the above. > ard@mba13:~/linux-2.6$ git grep -E 'status = \"ok\"' *.dts |wc -l 239 ard@mba13:~/linux-2.6$ git grep -E 'status = \"okay\"' *.dts |wc -l 8776 IOW, we'll need to deal with both, and the spurious false positive on 'oktopus' didn't seem like a big deal to me, hence the truncated comparison. But indeed, we should not assume that the property value is guaranteed to be at least 2 bytes in length. Let's be pedantic and permit 'ok' and 'okay' only. > > + > > + Status = FdtClient->GetNodeProperty (FdtClient, Node, "reg", > > + (CONST VOID **)&Reg, &RegSize); > > + if (EFI_ERROR (Status)) { > > + DEBUG ((EFI_D_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n", > > + __FUNCTION__, Status)); > > + continue; > > + } > > (3) We should say DEBUG_ERROR in new code. > Copy/paste error, will fix. > > + > > + ASSERT ((RegSize % (2 * sizeof(UINT64))) == 0); > > (4) Please add a space after the sizeof operator. > > > + > > + while (RegSize > 0) { > > + mNorFlashDevices[Num].DeviceBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > > + mNorFlashDevices[Num].RegionBaseAddress = (UINTN)SwapBytes64 (Reg[0]); > > + mNorFlashDevices[Num].Size = (UINTN)SwapBytes64 (Reg[1]); > > + mNorFlashDevices[Num].BlockSize = QEMU_NOR_BLOCK_SIZE; > > + > > + Num++; > > + Reg += 2; > > + RegSize -= 2 * sizeof(UINT64); > > (5) Same as (4). > > > + > > + if (Num >= MAX_FLASH_BANKS) { > > + goto Finished; > > + } > > + } > > + } > > + > > +Finished: > > (6) Can you replace the "goto" with an additional restriction, added to > both loop's controlling expressions, namely (Num < MAX_FLASH_BANKS)? > > I understand the appeal of the "goto", but "Finished" is not an error > handling label. > > If you disagree, I won't insist. > No, I'll change that - I wasn't entirely happy with it myself tbh. > > *NorFlashDescriptions = mNorFlashDevices; > > - *Count = ARRAY_SIZE (mNorFlashDevices); > > + *Count = Num; > > (7) *Count has type UINT32; I suggest changing Num to UINT32 as well. > > If you disagree, I won't insist; I do realize ARRAY_SIZE() used to > produce an UINTN as well. :/ > No I'll change that. > > return EFI_SUCCESS; > > } > > diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > index 126d1671f544..d86ff36dbd58 100644 > > --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > > @@ -28,3 +28,15 @@ > > [Packages] > > MdePkg/MdePkg.dec > > ArmPlatformPkg/ArmPlatformPkg.dec > > + ArmVirtPkg/ArmVirtPkg.dec > > + > > +[LibraryClasses] > > + BaseLib > > + DebugLib > > + UefiBootServicesTableLib > > + > > +[Protocols] > > + gFdtClientProtocolGuid ## CONSUMES > > + > > +[Depex] > > + gFdtClientProtocolGuid > > > > Thanks for writing these patches! > Laszlo _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c index e3bbae5b06c5..dc0a15e77170 100644 --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c @@ -1,6 +1,6 @@ /** @file - Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR> + Copyright (c) 2014-2018, Linaro Ltd. All rights reserved.<BR> This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License @@ -12,13 +12,16 @@ **/ +#include <Library/BaseLib.h> +#include <Library/DebugLib.h> #include <Library/NorFlashPlatformLib.h> +#include <Library/UefiBootServicesTableLib.h> + +#include <Protocol/FdtClient.h> #define QEMU_NOR_BLOCK_SIZE SIZE_256KB -#define QEMU_NOR0_BASE 0x0 -#define QEMU_NOR0_SIZE SIZE_64MB -#define QEMU_NOR1_BASE 0x04000000 -#define QEMU_NOR1_SIZE SIZE_64MB + +#define MAX_FLASH_BANKS 4 EFI_STATUS NorFlashPlatformInitialization ( @@ -28,21 +31,7 @@ NorFlashPlatformInitialization ( return EFI_SUCCESS; } -NOR_FLASH_DESCRIPTION mNorFlashDevices[] = { - { - QEMU_NOR0_BASE, - QEMU_NOR0_BASE, - QEMU_NOR0_SIZE, - QEMU_NOR_BLOCK_SIZE, - {0xF9B94AE2, 0x8BA6, 0x409B, {0x9D, 0x56, 0xB9, 0xB4, 0x17, 0xF5, 0x3C, 0xB3}} - }, { - QEMU_NOR1_BASE, - QEMU_NOR1_BASE, - QEMU_NOR1_SIZE, - QEMU_NOR_BLOCK_SIZE, - {0x8047DB4B, 0x7E9C, 0x4C0C, {0x8E, 0xBC, 0xDF, 0xBB, 0xAA, 0xCA, 0xCE, 0x8F}} - } -}; +NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_BANKS]; EFI_STATUS NorFlashPlatformGetDevices ( @@ -50,7 +39,60 @@ NorFlashPlatformGetDevices ( OUT UINT32 *Count ) { + FDT_CLIENT_PROTOCOL *FdtClient; + INT32 Node; + EFI_STATUS Status; + EFI_STATUS FindNodeStatus; + CONST UINT64 *Reg; + UINT32 RegSize; + CONST CHAR8 *NodeStatus; + UINTN Num; + + Status = gBS->LocateProtocol (&gFdtClientProtocolGuid, NULL, + (VOID **)&FdtClient); + ASSERT_EFI_ERROR (Status); + + Num = 0; + for (FindNodeStatus = FdtClient->FindCompatibleNode (FdtClient, + "cfi-flash", &Node); + !EFI_ERROR (FindNodeStatus); + FindNodeStatus = FdtClient->FindNextCompatibleNode (FdtClient, + "cfi-flash", Node, &Node)) { + + Status = FdtClient->GetNodeProperty (FdtClient, Node, "status", + (CONST VOID **)&NodeStatus, NULL); + if (!EFI_ERROR (Status) && AsciiStrnCmp (NodeStatus, "ok", 2) != 0) { + continue; + } + + Status = FdtClient->GetNodeProperty (FdtClient, Node, "reg", + (CONST VOID **)&Reg, &RegSize); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n", + __FUNCTION__, Status)); + continue; + } + + ASSERT ((RegSize % (2 * sizeof(UINT64))) == 0); + + while (RegSize > 0) { + mNorFlashDevices[Num].DeviceBaseAddress = (UINTN)SwapBytes64 (Reg[0]); + mNorFlashDevices[Num].RegionBaseAddress = (UINTN)SwapBytes64 (Reg[0]); + mNorFlashDevices[Num].Size = (UINTN)SwapBytes64 (Reg[1]); + mNorFlashDevices[Num].BlockSize = QEMU_NOR_BLOCK_SIZE; + + Num++; + Reg += 2; + RegSize -= 2 * sizeof(UINT64); + + if (Num >= MAX_FLASH_BANKS) { + goto Finished; + } + } + } + +Finished: *NorFlashDescriptions = mNorFlashDevices; - *Count = ARRAY_SIZE (mNorFlashDevices); + *Count = Num; return EFI_SUCCESS; } diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf index 126d1671f544..d86ff36dbd58 100644 --- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf +++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf @@ -28,3 +28,15 @@ [Packages] MdePkg/MdePkg.dec ArmPlatformPkg/ArmPlatformPkg.dec + ArmVirtPkg/ArmVirtPkg.dec + +[LibraryClasses] + BaseLib + DebugLib + UefiBootServicesTableLib + +[Protocols] + gFdtClientProtocolGuid ## CONSUMES + +[Depex] + gFdtClientProtocolGuid
NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg that are not based on the device tree received from QEMU. For ArmVirtQemu, this does not really matter, given that the NOR flash banks are always the same: the PEI code is linked to execute in place from flash bank #0, and the fixed varstore PCDs refer to flash bank #1 directly. However, ArmVirtQemuKernel can execute at any offset, and flash bank In this case, NorFlashQemuLib should not expose the first flash bank at all. To prevent introducing too much internal knowledge about which flash bank is accessible under which circumstances, let's switch to using the DTB to decide which flash banks to expose to the NOR flash driver. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c | 84 +++++++++++++++----- ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf | 12 +++ 2 files changed, 75 insertions(+), 21 deletions(-) -- 2.17.1 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel