| Message ID | 20181109145940.18536-1-m.szyprowski@samsung.com |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: exynos: Add missing clocks to RTC node for Arndale board | expand |
On Fri, Nov 09, 2018 at 03:59:40PM +0100, Marek Szyprowski wrote: > Add missing clocks to SoC build-in RTC device to make it fully > operational on Exynos5250-based Arndale board. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > arch/arm/boot/dts/exynos5250-arndale.dts | 9 +++++++++ Thanks, applied. Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 7d1f2dc59038..e2e5b3f28686 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/clock/samsung,s2mps11.h> #include "exynos5250.dtsi" / { @@ -264,6 +265,12 @@ <&gpx2 4 GPIO_ACTIVE_HIGH>, <&gpx2 5 GPIO_ACTIVE_HIGH>; + s5m8767_osc: clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "s5m8767_ap", "unused1", "unused2"; + }; + regulators { ldo1_reg: LDO1 { regulator-name = "VDD_ALIVE_1.0V"; @@ -601,6 +608,8 @@ }; &rtc { + clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; status = "okay"; };
Add missing clocks to SoC build-in RTC device to make it fully operational on Exynos5250-based Arndale board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- arch/arm/boot/dts/exynos5250-arndale.dts | 9 +++++++++ 1 file changed, 9 insertions(+) -- 2.17.1