| Message ID | 1537550727-21257-1-git-send-email-john.garry@huawei.com |
|---|---|
| Headers | show |
| Series | HiBMC driver fixes | expand |
On 26/09/2018 04:00, Xinliang Liu wrote: > Thanks John, good addressing! > The root cause as you said, our hibmc previous frame buffer format > depth setting is wrong which does not pass the new format sanity > checking drm_mode_legacy_fb_format. > For this series, Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com> > Applied to hisilicon-drm-next. I can't see this branch in the git associated with this driver from its MAINTAINERS entry (git://github.com/xin3liang/linux.git), but please ensure these fixes are included in 4.19 Thanks, John > > Thanks, > Xinliang > > On Sun, 23 Sep 2018 at 20:32, John Garry <john.garry@huawei.com> wrote: >> >> This patchset fixes a couple of issues in probing the HiBMC driver, as >> follows: >> - fix the probe error path to not carry an error code in the pointer >> - don't use invalid legacy fb bpp/depth combination >> >> Another more trivial patch is for using the standard Huawei PCI vendor ID >> instead of hard-coding it. >> >> Tested on Huawei D05 board. I can see tux on BMC VGA console. >> >> John Garry (3): >> drm/hisilicon: hibmc: Do not carry error code in HiBMC framebuffer >> pointer >> drm/hisilicon: hibmc: Don't overwrite fb helper surface depth >> drm/hisilicon: hibmc: Use HUAWEI PCI vendor ID macro >> >> drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 2 +- >> drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c | 2 +- >> 2 files changed, 2 insertions(+), 2 deletions(-) >> >> -- >> 1.9.1 >> >> _______________________________________________ >> dri-devel mailing list >> dri-devel@lists.freedesktop.org >> https://lists.freedesktop.org/mailman/listinfo/dri-devel > > . >
On Wed, 26 Sep 2018 at 16:46, John Garry <john.garry@huawei.com> wrote: > > On 26/09/2018 04:00, Xinliang Liu wrote: > > Thanks John, good addressing! > > The root cause as you said, our hibmc previous frame buffer format > > depth setting is wrong which does not pass the new format sanity > > checking drm_mode_legacy_fb_format. > > For this series, Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com> > > Applied to hisilicon-drm-next. > > I can't see this branch in the git associated with this driver from its > MAINTAINERS entry (git://github.com/xin3liang/linux.git), but please Not a branch, it is a tag: drm-hisilicon-next-2018-09-26 > ensure these fixes are included in 4.19 As it doesn't affect 4.19-rcx, I send a PULL for 4.20. See mail "[GIT PULL] drm-hisilicon-next-2018-09-26" > > Thanks, > John > > > > > Thanks, > > Xinliang > > > > On Sun, 23 Sep 2018 at 20:32, John Garry <john.garry@huawei.com> wrote: > >> > >> This patchset fixes a couple of issues in probing the HiBMC driver, as > >> follows: > >> - fix the probe error path to not carry an error code in the pointer > >> - don't use invalid legacy fb bpp/depth combination > >> > >> Another more trivial patch is for using the standard Huawei PCI vendor ID > >> instead of hard-coding it. > >> > >> Tested on Huawei D05 board. I can see tux on BMC VGA console. > >> > >> John Garry (3): > >> drm/hisilicon: hibmc: Do not carry error code in HiBMC framebuffer > >> pointer > >> drm/hisilicon: hibmc: Don't overwrite fb helper surface depth > >> drm/hisilicon: hibmc: Use HUAWEI PCI vendor ID macro > >> > >> drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 2 +- > >> drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c | 2 +- > >> 2 files changed, 2 insertions(+), 2 deletions(-) > >> > >> -- > >> 1.9.1 > >> > >> _______________________________________________ > >> dri-devel mailing list > >> dri-devel@lists.freedesktop.org > >> https://lists.freedesktop.org/mailman/listinfo/dri-devel > > > > . > > > >
On 26/09/2018 10:41, Xinliang Liu wrote: > On Wed, 26 Sep 2018 at 16:46, John Garry <john.garry@huawei.com> wrote: >> >> On 26/09/2018 04:00, Xinliang Liu wrote: >>> Thanks John, good addressing! >>> The root cause as you said, our hibmc previous frame buffer format >>> depth setting is wrong which does not pass the new format sanity >>> checking drm_mode_legacy_fb_format. >>> For this series, Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com> >>> Applied to hisilicon-drm-next. >> >> I can't see this branch in the git associated with this driver from its >> MAINTAINERS entry (git://github.com/xin3liang/linux.git), but please > Not a branch, it is a tag: drm-hisilicon-next-2018-09-26 > >> ensure these fixes are included in 4.19 > > As it doesn't affect 4.19-rcx, I send a PULL for 4.20. > See mail "[GIT PULL] drm-hisilicon-next-2018-09-26" When Chris' change goes into 4.20 - which I suspect will be before yours - boot-time bisect will be broken. John > >> >> Thanks, >> John >> >>> >>> Thanks, >>> Xinliang >>> >>> On Sun, 23 Sep 2018 at 20:32, John Garry <john.garry@huawei.com> wrote: >>>> >>>> This patchset fixes a couple of issues in probing the HiBMC driver, as >>>> follows: >>>> - fix the probe error path to not carry an error code in the pointer >>>> - don't use invalid legacy fb bpp/depth combination >>>> >>>> Another more trivial patch is for using the standard Huawei PCI vendor ID >>>> instead of hard-coding it. >>>> >>>> Tested on Huawei D05 board. I can see tux on BMC VGA console. >>>> >>>> John Garry (3): >>>> drm/hisilicon: hibmc: Do not carry error code in HiBMC framebuffer >>>> pointer >>>> drm/hisilicon: hibmc: Don't overwrite fb helper surface depth >>>> drm/hisilicon: hibmc: Use HUAWEI PCI vendor ID macro >>>> >>>> drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 2 +- >>>> drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c | 2 +- >>>> 2 files changed, 2 insertions(+), 2 deletions(-) >>>> >>>> -- >>>> 1.9.1 >>>> >>>> _______________________________________________ >>>> dri-devel mailing list >>>> dri-devel@lists.freedesktop.org >>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel >>> >>> . >>> >> >> > > . >
On Wed, 26 Sep 2018 at 17:54, John Garry <john.garry@huawei.com> wrote: > > On 26/09/2018 10:41, Xinliang Liu wrote: > > On Wed, 26 Sep 2018 at 16:46, John Garry <john.garry@huawei.com> wrote: > >> > >> On 26/09/2018 04:00, Xinliang Liu wrote: > >>> Thanks John, good addressing! > >>> The root cause as you said, our hibmc previous frame buffer format > >>> depth setting is wrong which does not pass the new format sanity > >>> checking drm_mode_legacy_fb_format. > >>> For this series, Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com> > >>> Applied to hisilicon-drm-next. > >> > >> I can't see this branch in the git associated with this driver from its > >> MAINTAINERS entry (git://github.com/xin3liang/linux.git), but please > > Not a branch, it is a tag: drm-hisilicon-next-2018-09-26 > > > >> ensure these fixes are included in 4.19 > > > > As it doesn't affect 4.19-rcx, I send a PULL for 4.20. > > See mail "[GIT PULL] drm-hisilicon-next-2018-09-26" > > When Chris' change goes into 4.20 - which I suspect will be before yours > - boot-time bisect will be broken. Yeah, that's might be a problem. > > John > > > > >> > >> Thanks, > >> John > >> > >>> > >>> Thanks, > >>> Xinliang > >>> > >>> On Sun, 23 Sep 2018 at 20:32, John Garry <john.garry@huawei.com> wrote: > >>>> > >>>> This patchset fixes a couple of issues in probing the HiBMC driver, as > >>>> follows: > >>>> - fix the probe error path to not carry an error code in the pointer > >>>> - don't use invalid legacy fb bpp/depth combination > >>>> > >>>> Another more trivial patch is for using the standard Huawei PCI vendor ID > >>>> instead of hard-coding it. > >>>> > >>>> Tested on Huawei D05 board. I can see tux on BMC VGA console. > >>>> > >>>> John Garry (3): > >>>> drm/hisilicon: hibmc: Do not carry error code in HiBMC framebuffer > >>>> pointer > >>>> drm/hisilicon: hibmc: Don't overwrite fb helper surface depth > >>>> drm/hisilicon: hibmc: Use HUAWEI PCI vendor ID macro > >>>> > >>>> drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 2 +- > >>>> drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c | 2 +- > >>>> 2 files changed, 2 insertions(+), 2 deletions(-) > >>>> > >>>> -- > >>>> 1.9.1 > >>>> > >>>> _______________________________________________ > >>>> dri-devel mailing list > >>>> dri-devel@lists.freedesktop.org > >>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel > >>> > >>> . > >>> > >> > >> > > > > . > > > >
This patchset fixes a couple of issues in probing the HiBMC driver, as follows: - fix the probe error path to not carry an error code in the pointer - don't use invalid legacy fb bpp/depth combination Another more trivial patch is for using the standard Huawei PCI vendor ID instead of hard-coding it. Tested on Huawei D05 board. I can see tux on BMC VGA console. John Garry (3): drm/hisilicon: hibmc: Do not carry error code in HiBMC framebuffer pointer drm/hisilicon: hibmc: Don't overwrite fb helper surface depth drm/hisilicon: hibmc: Use HUAWEI PCI vendor ID macro drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 2 +- drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) -- 1.9.1