| Message ID | 1537455973-12468-1-git-send-email-firoz.khan@linaro.org |
|---|---|
| Headers | show |
| Series | System call table generation support | expand |
Hi Firoz, On 21/09/18 01:06, Firoz Khan wrote: > The purpose of this patch series is: > 1. We can easily add/modify/delete system call by changing entry > in syscall.tbl file. No need to manually edit many files. > > 2. It is easy to unify the system call implementation across all > the architectures. > > The system call tables are in different format in all architecture > and it will be difficult to manually add or modify the system calls > in the respective files manually. To make it easy by keeping a script > and which'll generate the header file and syscall table file so this > change will unify them across all architectures. > > syscall.tbl contains the list of available system calls along with > system call number and corresponding entry point. Add a new system > call in this architecture will be possible by adding new entry in > the syscall.tbl file. > > Adding a new table entry consisting of: > - System call number. > - ABI. > - System call name. > - Entry point name. > - Compat entry name, if required. > > ARM, s390 and x86 architecuture does exist the similar support. I > leverage their implementation to come up with a generic solution. > > I have done the same support for work for alpha, microblaze, sparc, > mips, parisc, powerpc, sh, sparc, and xtensa. But I started sending > the patch for one architecuture for review. Below mentioned git > repository contains more details. > Git repo:- https://github.com/frzkhn/system_call_table_generator/ > > Added an extra patch to keep __IGNORE* entries in asm/unistd.h. > > Finally, this is the ground work for solving the Y2038 issue. We > need to add/change two dozen of system calls to solve Y2038 issue. > So this patch series will help to easily modify from existing > system call to Y2038 compatible system calls. > > Firoz Khan (5): > m68k: Rename system call table file name > m68k: Replace NR_syscalls macro from asm/unistd.h > m68k: Added system call table generation support > m68k: uapi header and system call table file generation > m68k: added __IGNORE* entries in asm/unistd.h Built and tested on a couple of m68k/ColdFire targets, m520x (no MMU) and m5475 (with MMU). Load and run on real hardware, no problems found. So for m68knommu/ColdFire: Tested-by: Greg Ungerer <gerg@linux-m68k.org> Regards Greg > arch/m68k/Makefile | 3 + > arch/m68k/include/asm/Kbuild | 1 + > arch/m68k/include/asm/unistd.h | 10 +- > arch/m68k/include/uapi/asm/Kbuild | 1 + > arch/m68k/include/uapi/asm/unistd.h | 385 +----------------------------- > arch/m68k/kernel/Makefile | 2 +- > arch/m68k/kernel/syscall_table.S | 14 ++ > arch/m68k/kernel/syscalls/Makefile | 37 +++ > arch/m68k/kernel/syscalls/syscall.tbl | 369 +++++++++++++++++++++++++++++ > arch/m68k/kernel/syscalls/syscallhdr.sh | 39 ++++ > arch/m68k/kernel/syscalls/syscalltbl.sh | 28 +++ > arch/m68k/kernel/syscalltable.S | 403 -------------------------------- > 12 files changed, 502 insertions(+), 790 deletions(-) > create mode 100644 arch/m68k/kernel/syscall_table.S > create mode 100644 arch/m68k/kernel/syscalls/Makefile > create mode 100644 arch/m68k/kernel/syscalls/syscall.tbl > create mode 100644 arch/m68k/kernel/syscalls/syscallhdr.sh > create mode 100644 arch/m68k/kernel/syscalls/syscalltbl.sh > delete mode 100644 arch/m68k/kernel/syscalltable.S >
Hi Greg, On Mon, 24 Sep 2018 at 06:38, Greg Ungerer <gerg@linux-m68k.org> wrote: > > Hi Firoz, > > On 21/09/18 01:06, Firoz Khan wrote: > > The purpose of this patch series is: > > 1. We can easily add/modify/delete system call by changing entry > > in syscall.tbl file. No need to manually edit many files. > > > > 2. It is easy to unify the system call implementation across all > > the architectures. > > > > The system call tables are in different format in all architecture > > and it will be difficult to manually add or modify the system calls > > in the respective files manually. To make it easy by keeping a script > > and which'll generate the header file and syscall table file so this > > change will unify them across all architectures. > > > > syscall.tbl contains the list of available system calls along with > > system call number and corresponding entry point. Add a new system > > call in this architecture will be possible by adding new entry in > > the syscall.tbl file. > > > > Adding a new table entry consisting of: > > - System call number. > > - ABI. > > - System call name. > > - Entry point name. > > - Compat entry name, if required. > > > > ARM, s390 and x86 architecuture does exist the similar support. I > > leverage their implementation to come up with a generic solution. > > > > I have done the same support for work for alpha, microblaze, sparc, > > mips, parisc, powerpc, sh, sparc, and xtensa. But I started sending > > the patch for one architecuture for review. Below mentioned git > > repository contains more details. > > Git repo:- https://github.com/frzkhn/system_call_table_generator/ > > > > Added an extra patch to keep __IGNORE* entries in asm/unistd.h. > > > > Finally, this is the ground work for solving the Y2038 issue. We > > need to add/change two dozen of system calls to solve Y2038 issue. > > So this patch series will help to easily modify from existing > > system call to Y2038 compatible system calls. > > > > Firoz Khan (5): > > m68k: Rename system call table file name > > m68k: Replace NR_syscalls macro from asm/unistd.h > > m68k: Added system call table generation support > > m68k: uapi header and system call table file generation > > m68k: added __IGNORE* entries in asm/unistd.h > > Built and tested on a couple of m68k/ColdFire targets, > m520x (no MMU) and m5475 (with MMU). Load and run on real hardware, > no problems found. So for m68knommu/ColdFire: Thanks for your support! Philippe De Muyter shared one comment. I have to include that change in the patch series. BTW I can post version 3 patch series within couple of days. It would be great if someone can review this patches now and share your comments. So I can include it in the next version. - Firoz > > Tested-by: Greg Ungerer <gerg@linux-m68k.org> > > Regards > Greg > > > > arch/m68k/Makefile | 3 + > > arch/m68k/include/asm/Kbuild | 1 + > > arch/m68k/include/asm/unistd.h | 10 +- > > arch/m68k/include/uapi/asm/Kbuild | 1 + > > arch/m68k/include/uapi/asm/unistd.h | 385 +----------------------------- > > arch/m68k/kernel/Makefile | 2 +- > > arch/m68k/kernel/syscall_table.S | 14 ++ > > arch/m68k/kernel/syscalls/Makefile | 37 +++ > > arch/m68k/kernel/syscalls/syscall.tbl | 369 +++++++++++++++++++++++++++++ > > arch/m68k/kernel/syscalls/syscallhdr.sh | 39 ++++ > > arch/m68k/kernel/syscalls/syscalltbl.sh | 28 +++ > > arch/m68k/kernel/syscalltable.S | 403 -------------------------------- > > 12 files changed, 502 insertions(+), 790 deletions(-) > > create mode 100644 arch/m68k/kernel/syscall_table.S > > create mode 100644 arch/m68k/kernel/syscalls/Makefile > > create mode 100644 arch/m68k/kernel/syscalls/syscall.tbl > > create mode 100644 arch/m68k/kernel/syscalls/syscallhdr.sh > > create mode 100644 arch/m68k/kernel/syscalls/syscalltbl.sh > > delete mode 100644 arch/m68k/kernel/syscalltable.S > >
On Thu, Sep 20, 2018 at 5:06 PM Firoz Khan <firoz.khan@linaro.org> wrote: > The purpose of this patch series is: > 1. We can easily add/modify/delete system call by changing entry > in syscall.tbl file. No need to manually edit many files. > > 2. It is easy to unify the system call implementation across all > the architectures. > > The system call tables are in different format in all architecture > and it will be difficult to manually add or modify the system calls > in the respective files manually. To make it easy by keeping a script > and which'll generate the header file and syscall table file so this > change will unify them across all architectures. > > syscall.tbl contains the list of available system calls along with > system call number and corresponding entry point. Add a new system > call in this architecture will be possible by adding new entry in > the syscall.tbl file. > > Adding a new table entry consisting of: > - System call number. > - ABI. > - System call name. > - Entry point name. > - Compat entry name, if required. > > ARM, s390 and x86 architecuture does exist the similar support. I > leverage their implementation to come up with a generic solution. > > I have done the same support for work for alpha, microblaze, sparc, > mips, parisc, powerpc, sh, sparc, and xtensa. But I started sending > the patch for one architecuture for review. Below mentioned git > repository contains more details. > Git repo:- https://github.com/frzkhn/system_call_table_generator/ > > Added an extra patch to keep __IGNORE* entries in asm/unistd.h. > > Finally, this is the ground work for solving the Y2038 issue. We > need to add/change two dozen of system calls to solve Y2038 issue. > So this patch series will help to easily modify from existing > system call to Y2038 compatible system calls. > > Firoz Khan (5): > m68k: Rename system call table file name > m68k: Replace NR_syscalls macro from asm/unistd.h > m68k: Added system call table generation support > m68k: uapi header and system call table file generation > m68k: added __IGNORE* entries in asm/unistd.h > > arch/m68k/Makefile | 3 + > arch/m68k/include/asm/Kbuild | 1 + > arch/m68k/include/asm/unistd.h | 10 +- > arch/m68k/include/uapi/asm/Kbuild | 1 + > arch/m68k/include/uapi/asm/unistd.h | 385 +----------------------------- > arch/m68k/kernel/Makefile | 2 +- > arch/m68k/kernel/syscall_table.S | 14 ++ > arch/m68k/kernel/syscalls/Makefile | 37 +++ > arch/m68k/kernel/syscalls/syscall.tbl | 369 +++++++++++++++++++++++++++++ > arch/m68k/kernel/syscalls/syscallhdr.sh | 39 ++++ > arch/m68k/kernel/syscalls/syscalltbl.sh | 28 +++ > arch/m68k/kernel/syscalltable.S | 403 -------------------------------- > 12 files changed, 502 insertions(+), 790 deletions(-) > create mode 100644 arch/m68k/kernel/syscall_table.S > create mode 100644 arch/m68k/kernel/syscalls/Makefile > create mode 100644 arch/m68k/kernel/syscalls/syscall.tbl > create mode 100644 arch/m68k/kernel/syscalls/syscallhdr.sh > create mode 100644 arch/m68k/kernel/syscalls/syscalltbl.sh > delete mode 100644 arch/m68k/kernel/syscalltable.S Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
The purpose of this patch series is: 1. We can easily add/modify/delete system call by changing entry in syscall.tbl file. No need to manually edit many files. 2. It is easy to unify the system call implementation across all the architectures. The system call tables are in different format in all architecture and it will be difficult to manually add or modify the system calls in the respective files manually. To make it easy by keeping a script and which'll generate the header file and syscall table file so this change will unify them across all architectures. syscall.tbl contains the list of available system calls along with system call number and corresponding entry point. Add a new system call in this architecture will be possible by adding new entry in the syscall.tbl file. Adding a new table entry consisting of: - System call number. - ABI. - System call name. - Entry point name. - Compat entry name, if required. ARM, s390 and x86 architecuture does exist the similar support. I leverage their implementation to come up with a generic solution. I have done the same support for work for alpha, microblaze, sparc, mips, parisc, powerpc, sh, sparc, and xtensa. But I started sending the patch for one architecuture for review. Below mentioned git repository contains more details. Git repo:- https://github.com/frzkhn/system_call_table_generator/ Added an extra patch to keep __IGNORE* entries in asm/unistd.h. Finally, this is the ground work for solving the Y2038 issue. We need to add/change two dozen of system calls to solve Y2038 issue. So this patch series will help to easily modify from existing system call to Y2038 compatible system calls. Firoz Khan (5): m68k: Rename system call table file name m68k: Replace NR_syscalls macro from asm/unistd.h m68k: Added system call table generation support m68k: uapi header and system call table file generation m68k: added __IGNORE* entries in asm/unistd.h arch/m68k/Makefile | 3 + arch/m68k/include/asm/Kbuild | 1 + arch/m68k/include/asm/unistd.h | 10 +- arch/m68k/include/uapi/asm/Kbuild | 1 + arch/m68k/include/uapi/asm/unistd.h | 385 +----------------------------- arch/m68k/kernel/Makefile | 2 +- arch/m68k/kernel/syscall_table.S | 14 ++ arch/m68k/kernel/syscalls/Makefile | 37 +++ arch/m68k/kernel/syscalls/syscall.tbl | 369 +++++++++++++++++++++++++++++ arch/m68k/kernel/syscalls/syscallhdr.sh | 39 ++++ arch/m68k/kernel/syscalls/syscalltbl.sh | 28 +++ arch/m68k/kernel/syscalltable.S | 403 -------------------------------- 12 files changed, 502 insertions(+), 790 deletions(-) create mode 100644 arch/m68k/kernel/syscall_table.S create mode 100644 arch/m68k/kernel/syscalls/Makefile create mode 100644 arch/m68k/kernel/syscalls/syscall.tbl create mode 100644 arch/m68k/kernel/syscalls/syscallhdr.sh create mode 100644 arch/m68k/kernel/syscalls/syscalltbl.sh delete mode 100644 arch/m68k/kernel/syscalltable.S -- 1.9.1