@@ -101,32 +101,11 @@ Prerequisites
-------------
DPAA_SEC driver has similar pre-requisites as described in :ref:`dpaa_overview`.
-The following dependencies are not part of DPDK and must be installed separately:
-* **NXP Linux SDK**
+See :doc:`../platform/dpaa` for setup information
- NXP Linux software development kit (SDK) includes support for the family
- of QorIQ® ARM-Architecture-based system on chip (SoC) processors
- and corresponding boards.
- It includes the Linux board support packages (BSPs) for NXP SoCs,
- a fully operational tool chain, kernel and board specific modules.
-
- SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
-
-* **DPDK Extras Scripts**
-
- DPAA based resources can be configured easily with the help of ready scripts
- as provided in the DPDK Extras repository.
-
- `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
-
-Currently supported by DPDK:
-
-* NXP SDK **2.0+**.
-* Supported architectures: **arm64 LE**.
-
-* Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
Pre-Installation Configuration
------------------------------
@@ -25,57 +25,17 @@ The DPAA EVENTDEV implements many features in the eventdev API;
Supported DPAA SoCs
--------------------
-- LS1046A
-- LS1043A
+- LS1046A/LS1026A
+- LS1043A/LS1023A
Prerequisites
-------------
-There are following pre-requisites for executing EVENTDEV on a DPAA compatible
-platform:
-
-1. **ARM 64 Tool Chain**
-
- For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08/aarch64-linux-gnu/>`_.
-
-2. **Linux Kernel**
-
- It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_.
-
-3. **Rootfile System**
-
- Any *aarch64* supporting filesystem can be used. For example,
- Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
- from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
-
-As an alternative method, DPAA EVENTDEV can also be executed using images provided
-as part of SDK from NXP. The SDK includes all the above prerequisites necessary
-to bring up a DPAA board.
-
-The following dependencies are not part of DPDK and must be installed
-separately:
-
-- **NXP Linux SDK**
-
- NXP Linux software development kit (SDK) includes support for family
- of QorIQ® ARM-Architecture-based system on chip (SoC) processors
- and corresponding boards.
-
- It includes the Linux board support packages (BSPs) for NXP SoCs,
- a fully operational tool chain, kernel and board specific modules.
-
- SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
-
-- **DPDK Extra Scripts**
-
- DPAA based resources can be configured easily with the help of ready to use
- xml files as provided in the DPDK Extra repository.
-
- `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
+See :doc:`../platform/dpaa` for setup information
Currently supported by DPDK:
-- NXP SDK **2.0+** or LSDK **17.09+**
+- NXP SDK **2.0+** or LSDK **18.09+**
- Supported architectures: **arm64 LE**.
- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
@@ -181,65 +181,8 @@ Supported DPAA SoCs
Prerequisites
-------------
-There are three main pre-requisities for executing DPAA PMD on a DPAA
-compatible board:
+See :doc:`../platform/dpaa` for setup information
-1. **ARM 64 Tool Chain**
-
- For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08/aarch64-linux-gnu/>`_.
-
-2. **Linux Kernel**
-
- It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_.
-
-3. **Rootfile system**
-
- Any *aarch64* supporting filesystem can be used. For example,
- Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
- from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
-
-4. **FMC Tool**
-
- Before any DPDK application can be executed, the Frame Manager Configuration
- Tool (FMC) need to be executed to set the configurations of the queues. This
- includes the queue state, RSS and other policies.
- This tool can be obtained from `NXP (Freescale) Public Git Repository <https://github.com/qoriq-open-source/fmc>`_.
-
- This tool needs configuration files which are available in the
- :ref:`DPDK Extra Scripts <extra_scripts>`, described below for DPDK usages.
-
-As an alternative method, DPAA PMD can also be executed using images provided
-as part of SDK from NXP. The SDK includes all the above prerequisites necessary
-to bring up a DPAA board.
-
-The following dependencies are not part of DPDK and must be installed
-separately:
-
-- **NXP Linux SDK**
-
- NXP Linux software development kit (SDK) includes support for family
- of QorIQ® ARM-Architecture-based system on chip (SoC) processors
- and corresponding boards.
-
- It includes the Linux board support packages (BSPs) for NXP SoCs,
- a fully operational tool chain, kernel and board specific modules.
-
- SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
-
-
-.. _extra_scripts:
-
-- **DPDK Extra Scripts**
-
- DPAA based resources can be configured easily with the help of ready scripts
- as provided in the DPDK Extra repository.
-
- `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
-
-Currently supported by DPDK:
-
-- NXP SDK **2.0+**.
-- Supported architectures: **arm64 LE**.
- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>`
to setup the basic DPDK environment.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> --- doc/guides/cryptodevs/dpaa_sec.rst | 25 ++-------------- doc/guides/eventdevs/dpaa.rst | 48 +++---------------------------- doc/guides/nics/dpaa.rst | 59 +------------------------------------- 3 files changed, 7 insertions(+), 125 deletions(-) -- 2.7.4