| Message ID | 20180905144443.6160-1-m.szyprowski@samsung.com |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: exynos: Add missing PMIC interrupts on UniversalC210 board | expand |
On Wed, Sep 05, 2018 at 04:44:43PM +0200, Marek Szyprowski wrote: > PMIC node requires external interrupts for proper operation. Lack of them > was probably caused by a limited support for interrupts from more than one > parent, which was not possible to define when support for this board was > added. Fix this by adding 'interrupt-extended' property and properly > define both interrupt lines for PMIC node. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > arch/arm/boot/dts/exynos4210-universal_c210.dts | 8 ++++++++ > 1 file changed, 8 insertions(+) Thanks, applied. Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 4e6ff97e1ec4..a341ac3547cc 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -310,6 +310,9 @@ pmic@66 { compatible = "national,lp3974"; + interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&lp3974_irq>; reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; @@ -507,6 +510,11 @@ samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; + + lp3974_irq: lp3974-irq { + samsung,pins = "gpx0-7", "gpx2-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; }; &pinctrl_0 {
PMIC node requires external interrupts for proper operation. Lack of them was probably caused by a limited support for interrupts from more than one parent, which was not possible to define when support for this board was added. Fix this by adding 'interrupt-extended' property and properly define both interrupt lines for PMIC node. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- arch/arm/boot/dts/exynos4210-universal_c210.dts | 8 ++++++++ 1 file changed, 8 insertions(+) -- 2.17.1