diff mbox series

[RFC] serial: sc16is7xx: Use DT sub-nodes for UART ports

Message ID 20180805232651.10605-1-afaerber@suse.de
State New
Headers show
Series [RFC] serial: sc16is7xx: Use DT sub-nodes for UART ports | expand

Commit Message

Andreas Färber Aug. 5, 2018, 11:26 p.m. UTC
This is to allow using serdev.

Signed-off-by: Andreas Färber <afaerber@suse.de>

---
 drivers/tty/serial/sc16is7xx.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

-- 
2.16.4

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Andreas Färber Aug. 6, 2018, 4:21 p.m. UTC | #1
Am 06.08.2018 um 01:26 schrieb Andreas Färber:
> This is to allow using serdev.

> 

> Signed-off-by: Andreas Färber <afaerber@suse.de>

> ---

>  drivers/tty/serial/sc16is7xx.c | 25 +++++++++++++++++++++++++

>  1 file changed, 25 insertions(+)

> 

> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c

> index 243c96025053..ad7267274f65 100644

> --- a/drivers/tty/serial/sc16is7xx.c

> +++ b/drivers/tty/serial/sc16is7xx.c

> @@ -1213,9 +1213,31 @@ static int sc16is7xx_probe(struct device *dev,

>  			SC16IS7XX_IOCONTROL_SRESET_BIT);

>  

>  	for (i = 0; i < devtype->nr_uart; ++i) {

> +#ifdef CONFIG_OF


Looks like this and below need to be CONFIG_OF_ADDRESS (build failure
reported for sparc).

Regards,
Andreas

> +		struct device_node *np;

> +		struct platform_device *pdev;

> +		char name[6] = "uartx";

> +#endif

> +

>  		s->p[i].line		= i;

>  		/* Initialize port data */

> +#ifdef CONFIG_OF

> +		name[4] = '0' + i;

> +		np = of_get_child_by_name(dev->of_node, name);

> +		if (IS_ERR(np)) {

> +			ret = PTR_ERR(np);

> +			goto out_ports;

> +		}

> +		pdev = of_platform_device_create(np, NULL, dev);

> +		if (IS_ERR(pdev)) {

> +			ret = PTR_ERR(pdev);

> +			goto out_ports;

> +		}

> +		platform_set_drvdata(pdev, dev_get_drvdata(dev));

> +		s->p[i].port.dev	= &pdev->dev;

> +#else

>  		s->p[i].port.dev	= dev;

> +#endif

>  		s->p[i].port.irq	= irq;

>  		s->p[i].port.type	= PORT_SC16IS7XX;

>  		s->p[i].port.fifosize	= SC16IS7XX_FIFO_SIZE;

> @@ -1271,6 +1293,9 @@ static int sc16is7xx_probe(struct device *dev,

>  	for (i--; i >= 0; i--) {

>  		uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);

>  		clear_bit(s->p[i].port.line, &sc16is7xx_lines);

> +#ifdef CONFIG_OF

> +		of_platform_device_destroy(s->p[i].port.dev, NULL);

> +#endif

>  	}

>  

>  #ifdef CONFIG_GPIOLIB


-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rob Herring (Arm) Aug. 10, 2018, 5:34 p.m. UTC | #2
On Sun, Aug 5, 2018 at 5:27 PM Andreas Färber <afaerber@suse.de> wrote:
>

> This is to allow using serdev.

>

> Signed-off-by: Andreas Färber <afaerber@suse.de>

> ---

>  drivers/tty/serial/sc16is7xx.c | 25 +++++++++++++++++++++++++

>  1 file changed, 25 insertions(+)

>

> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c

> index 243c96025053..ad7267274f65 100644

> --- a/drivers/tty/serial/sc16is7xx.c

> +++ b/drivers/tty/serial/sc16is7xx.c

> @@ -1213,9 +1213,31 @@ static int sc16is7xx_probe(struct device *dev,

>                         SC16IS7XX_IOCONTROL_SRESET_BIT);

>

>         for (i = 0; i < devtype->nr_uart; ++i) {

> +#ifdef CONFIG_OF

> +               struct device_node *np;

> +               struct platform_device *pdev;

> +               char name[6] = "uartx";

> +#endif

> +

>                 s->p[i].line            = i;

>                 /* Initialize port data */

> +#ifdef CONFIG_OF

> +               name[4] = '0' + i;

> +               np = of_get_child_by_name(dev->of_node, name);

> +               if (IS_ERR(np)) {

> +                       ret = PTR_ERR(np);

> +                       goto out_ports;

> +               }

> +               pdev = of_platform_device_create(np, NULL, dev);


Ideally, you would use of_platform_default_populate here. I think
you'd have to add a compatible to the child nodes, but that wouldn't
be a bad thing. I could envision that the child nodes ultimately
become their own driver utilizing the standard 8250 driver and a
compatible string would be needed in that case.

You'd then have to loop over each child of 'dev' instead of the DT nodes.

> +               if (IS_ERR(pdev)) {

> +                       ret = PTR_ERR(pdev);

> +                       goto out_ports;

> +               }

> +               platform_set_drvdata(pdev, dev_get_drvdata(dev));

> +               s->p[i].port.dev        = &pdev->dev;

> +#else

>                 s->p[i].port.dev        = dev;

> +#endif

>                 s->p[i].port.irq        = irq;

>                 s->p[i].port.type       = PORT_SC16IS7XX;

>                 s->p[i].port.fifosize   = SC16IS7XX_FIFO_SIZE;
Andreas Färber Aug. 10, 2018, 5:45 p.m. UTC | #3
Am 10.08.2018 um 19:34 schrieb Rob Herring:
> On Sun, Aug 5, 2018 at 5:27 PM Andreas Färber <afaerber@suse.de> wrote:

>>

>> This is to allow using serdev.

>>

>> Signed-off-by: Andreas Färber <afaerber@suse.de>

>> ---

>>  drivers/tty/serial/sc16is7xx.c | 25 +++++++++++++++++++++++++

>>  1 file changed, 25 insertions(+)

>>

>> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c

>> index 243c96025053..ad7267274f65 100644

>> --- a/drivers/tty/serial/sc16is7xx.c

>> +++ b/drivers/tty/serial/sc16is7xx.c

>> @@ -1213,9 +1213,31 @@ static int sc16is7xx_probe(struct device *dev,

>>                         SC16IS7XX_IOCONTROL_SRESET_BIT);

>>

>>         for (i = 0; i < devtype->nr_uart; ++i) {

>> +#ifdef CONFIG_OF

>> +               struct device_node *np;

>> +               struct platform_device *pdev;

>> +               char name[6] = "uartx";

>> +#endif

>> +

>>                 s->p[i].line            = i;

>>                 /* Initialize port data */

>> +#ifdef CONFIG_OF

>> +               name[4] = '0' + i;

>> +               np = of_get_child_by_name(dev->of_node, name);

>> +               if (IS_ERR(np)) {

>> +                       ret = PTR_ERR(np);

>> +                       goto out_ports;

>> +               }

>> +               pdev = of_platform_device_create(np, NULL, dev);

> 

> Ideally, you would use of_platform_default_populate here. I think

> you'd have to add a compatible to the child nodes, but that wouldn't

> be a bad thing. I could envision that the child nodes ultimately

> become their own driver utilizing the standard 8250 driver and a

> compatible string would be needed in that case.


Separate compatibles would mean separate drivers.

Unlike your DUART example this is not an MMIO device that we can easily
split but a SPI slave (well, regmap due to some I2C models).

I don't see how separate drivers could work, given that the whole
spi_device has a single interrupt for all functions of this device.

That left me with this ugly but working construct.

Is the uartX naming correct, or should it be serialX?

Regards,
Andreas

> 

> You'd then have to loop over each child of 'dev' instead of the DT nodes.

> 

>> +               if (IS_ERR(pdev)) {

>> +                       ret = PTR_ERR(pdev);

>> +                       goto out_ports;

>> +               }

>> +               platform_set_drvdata(pdev, dev_get_drvdata(dev));

>> +               s->p[i].port.dev        = &pdev->dev;

>> +#else

>>                 s->p[i].port.dev        = dev;

>> +#endif

>>                 s->p[i].port.irq        = irq;

>>                 s->p[i].port.type       = PORT_SC16IS7XX;

>>                 s->p[i].port.fifosize   = SC16IS7XX_FIFO_SIZE;



-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
diff mbox series

Patch

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 243c96025053..ad7267274f65 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1213,9 +1213,31 @@  static int sc16is7xx_probe(struct device *dev,
 			SC16IS7XX_IOCONTROL_SRESET_BIT);
 
 	for (i = 0; i < devtype->nr_uart; ++i) {
+#ifdef CONFIG_OF
+		struct device_node *np;
+		struct platform_device *pdev;
+		char name[6] = "uartx";
+#endif
+
 		s->p[i].line		= i;
 		/* Initialize port data */
+#ifdef CONFIG_OF
+		name[4] = '0' + i;
+		np = of_get_child_by_name(dev->of_node, name);
+		if (IS_ERR(np)) {
+			ret = PTR_ERR(np);
+			goto out_ports;
+		}
+		pdev = of_platform_device_create(np, NULL, dev);
+		if (IS_ERR(pdev)) {
+			ret = PTR_ERR(pdev);
+			goto out_ports;
+		}
+		platform_set_drvdata(pdev, dev_get_drvdata(dev));
+		s->p[i].port.dev	= &pdev->dev;
+#else
 		s->p[i].port.dev	= dev;
+#endif
 		s->p[i].port.irq	= irq;
 		s->p[i].port.type	= PORT_SC16IS7XX;
 		s->p[i].port.fifosize	= SC16IS7XX_FIFO_SIZE;
@@ -1271,6 +1293,9 @@  static int sc16is7xx_probe(struct device *dev,
 	for (i--; i >= 0; i--) {
 		uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
 		clear_bit(s->p[i].port.line, &sc16is7xx_lines);
+#ifdef CONFIG_OF
+		of_platform_device_destroy(s->p[i].port.dev, NULL);
+#endif
 	}
 
 #ifdef CONFIG_GPIOLIB