diff mbox series

[v6,6/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP

Message ID bf1147fa417314b2fbf5c0cfb682445587fe39bb.1531136000.git.amit.kucheria@linaro.org
State New
Headers show
Series None | expand

Commit Message

Amit Kucheria July 9, 2018, 11:43 a.m. UTC
We want to create common code for v2 of the TSENS IP block that is used in
a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle
most of the common functionality start with a common get_temp() function.

It is also necessary to split out the memory regions for the TM and SROT
register banks because their offsets are not constant across SoC families.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

---
 .../devicetree/bindings/thermal/qcom-tsens.txt     | 25 +++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Rob Herring (Arm) July 11, 2018, 1:49 p.m. UTC | #1
On Mon, Jul 09, 2018 at 05:13:28PM +0530, Amit Kucheria wrote:
> We want to create common code for v2 of the TSENS IP block that is used in

> a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle

> most of the common functionality start with a common get_temp() function.

> 

> It is also necessary to split out the memory regions for the TM and SROT

> register banks because their offsets are not constant across SoC families.

> 

> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

> ---

>  .../devicetree/bindings/thermal/qcom-tsens.txt     | 25 +++++++++++++++++-----

>  1 file changed, 20 insertions(+), 5 deletions(-)


Reviewed-by: Rob Herring <robh@kernel.org>

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Amit Kucheria July 12, 2018, 5:56 a.m. UTC | #2
On Thu, Jul 12, 2018 at 12:12 AM Doug Anderson <dianders@chromium.org> wrote:
>

> Hi,

>

> On Mon, Jul 9, 2018 at 4:43 AM, Amit Kucheria <amit.kucheria@linaro.org> wrote:

> > We want to create common code for v2 of the TSENS IP block that is used in

> > a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle

> > most of the common functionality start with a common get_temp() function.

> >

> > It is also necessary to split out the memory regions for the TM and SROT

> > register banks because their offsets are not constant across SoC families.

>

> nit that bindings should be earlier in the patch series than the code

> implementing the bindings.


Will reorder.

>

> > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

> > ---

> >  .../devicetree/bindings/thermal/qcom-tsens.txt     | 25 +++++++++++++++++-----

> >  1 file changed, 20 insertions(+), 5 deletions(-)

> >

> > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt

> > index 06195e8..8f963b1 100644

> > --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt

> > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt

> > @@ -1,10 +1,16 @@

> >  * QCOM SoC Temperature Sensor (TSENS)

> >

> >  Required properties:

> > -- compatible :

> > - - "qcom,msm8916-tsens" : For 8916 Family of SoCs

> > - - "qcom,msm8974-tsens" : For 8974 Family of SoCs

> > - - "qcom,msm8996-tsens" : For 8996 Family of SoCs

> > +- compatible:

> > +  Must be one of the following:

> > +    - "qcom,msm8916-tsens" (MSM8916)

> > +    - "qcom,msm8974-tsens" (MSM8974)

> > +    - "qcom,msm8996-tsens" (MSM8996)

> > +    - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)

> > +    - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)

> > +  The generic "qcom,tsens-v2" property must be used as a fallback for any SoC with

> > +  version 2 of the TSENS IP. MSM8996 is the only exception beacause the generic

> > +  property did not exist when support was added.

> >

> >  - reg: Address range of the thermal registers

>

> You need to document that for old SoCs where TM / SROT were 0x1000

> apart (SROT first) that one "reg" field was OK.  ...and that for new

> SoCs you specify two reg ranges: the first for TM and the second for

> SROT.


OK.

> >  - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.

> > @@ -12,7 +18,7 @@ Required properties:

> >  - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify

> >  nvmem cells

> >

> > -Example:

> > +Example 1 (legacy support before a fallback tsens-v2 propoerty was introduced):

> >  tsens: thermal-sensor@900000 {

> >                 compatible = "qcom,msm8916-tsens";

> >                 reg = <0x4a8000 0x2000>;

> > @@ -20,3 +26,12 @@ tsens: thermal-sensor@900000 {

> >                 nvmem-cell-names = "caldata", "calsel";

> >                 #thermal-sensor-cells = <1>;

> >         };

> > +

> > +Example 2 (for any platform containing v2 of the TSENS IP):

> > +tsens0: tsens@c222000 {

>

> A) Use a generic name for the node, not a specific one.  Thus the node

> should be "thermal-sensor", not "tsens".

>

> B) This unit address needs to match the _first_ reg address listed.

> Give your reg below, this should be @c263000

>

> Thus your node name should be:

>

> tsens0: thermal-sensor@c263000 {


Fixed

> > +               compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";

> > +               reg = <0xc263000 0x1ff>, /* TM */

> > +                       <0xc222000 0x1ff>; /* SROT */

> > +               #qcom,sensors = <13>;

>

> The "#qcom,sensors" property seems wrong in a few ways:

>

> A) I wouldn't have expected it to start with a "#".  I only expect to

> see that on things specifying sizes / lengths.  Rob can feel free to

> override me, though.

>

> B) It's not documented above.  Just putting something in an example

> doesn't document it--it needs to be listed in the "Optional

> properties".

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 06195e8..8f963b1 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -1,10 +1,16 @@ 
 * QCOM SoC Temperature Sensor (TSENS)
 
 Required properties:
-- compatible :
- - "qcom,msm8916-tsens" : For 8916 Family of SoCs
- - "qcom,msm8974-tsens" : For 8974 Family of SoCs
- - "qcom,msm8996-tsens" : For 8996 Family of SoCs
+- compatible:
+  Must be one of the following:
+    - "qcom,msm8916-tsens" (MSM8916)
+    - "qcom,msm8974-tsens" (MSM8974)
+    - "qcom,msm8996-tsens" (MSM8996)
+    - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
+    - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
+  The generic "qcom,tsens-v2" property must be used as a fallback for any SoC with
+  version 2 of the TSENS IP. MSM8996 is the only exception beacause the generic
+  property did not exist when support was added.
 
 - reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
@@ -12,7 +18,7 @@  Required properties:
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
-Example:
+Example 1 (legacy support before a fallback tsens-v2 propoerty was introduced):
 tsens: thermal-sensor@900000 {
 		compatible = "qcom,msm8916-tsens";
 		reg = <0x4a8000 0x2000>;
@@ -20,3 +26,12 @@  tsens: thermal-sensor@900000 {
 		nvmem-cell-names = "caldata", "calsel";
 		#thermal-sensor-cells = <1>;
 	};
+
+Example 2 (for any platform containing v2 of the TSENS IP):
+tsens0: tsens@c222000 {
+		compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+		reg = <0xc263000 0x1ff>, /* TM */
+			<0xc222000 0x1ff>; /* SROT */
+		#qcom,sensors = <13>;
+		#thermal-sensor-cells = <1>;
+	};