| Message ID | 20180706130525.22223-1-benjamin.gaignard@st.com |
|---|---|
| State | New |
| Headers | show |
| Series | mtd: stm32-quadspi: replace "%p" with "%pK" | expand |
Am Freitag, 6. Juli 2018, 15:05:25 CEST schrieb Benjamin Gaignard: > The format specifier "%p" can leak kernel addresses. > Use "%pK" instead. Does %pK really make sense for dev_dbg()? When the driver is being debugged "leaking" is on purpose. :) Thanks, //richard > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> > --- > drivers/mtd/spi-nor/stm32-quadspi.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c > index 72553506a00b..13e9fc961d3b 100644 > --- a/drivers/mtd/spi-nor/stm32-quadspi.c > +++ b/drivers/mtd/spi-nor/stm32-quadspi.c > @@ -355,7 +355,7 @@ static int stm32_qspi_read_reg(struct spi_nor *nor, > struct device *dev = flash->qspi->dev; > struct stm32_qspi_cmd cmd; > > - dev_dbg(dev, "read_reg: cmd:%#.2x buf:%p len:%#x\n", opcode, buf, len); > + dev_dbg(dev, "read_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len); > > memset(&cmd, 0, sizeof(cmd)); > cmd.opcode = opcode; > @@ -376,7 +376,7 @@ static int stm32_qspi_write_reg(struct spi_nor *nor, u8 opcode, > struct device *dev = flash->qspi->dev; > struct stm32_qspi_cmd cmd; > > - dev_dbg(dev, "write_reg: cmd:%#.2x buf:%p len:%#x\n", opcode, buf, len); > + dev_dbg(dev, "write_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len); > > memset(&cmd, 0, sizeof(cmd)); > cmd.opcode = opcode; > @@ -398,7 +398,7 @@ static ssize_t stm32_qspi_read(struct spi_nor *nor, loff_t from, size_t len, > struct stm32_qspi_cmd cmd; > int err; > > - dev_dbg(qspi->dev, "read(%#.2x): buf:%p from:%#.8x len:%#zx\n", > + dev_dbg(qspi->dev, "read(%#.2x): buf:%pK from:%#.8x len:%#zx\n", > nor->read_opcode, buf, (u32)from, len); > > memset(&cmd, 0, sizeof(cmd)); >
On Fri, 06 Jul 2018 16:44:44 +0200 Richard Weinberger <richard@nod.at> wrote: > Am Freitag, 6. Juli 2018, 15:05:25 CEST schrieb Benjamin Gaignard: > > The format specifier "%p" can leak kernel addresses. > > Use "%pK" instead. > > Does %pK really make sense for dev_dbg()? > When the driver is being debugged "leaking" is on purpose. :) %p already gives you a hash of the pointer address. At least with %pK you can turn it off through a sysctl :). > > Thanks, > //richard > > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> > > --- > > drivers/mtd/spi-nor/stm32-quadspi.c | 6 +++--- > > 1 file changed, 3 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c > > index 72553506a00b..13e9fc961d3b 100644 > > --- a/drivers/mtd/spi-nor/stm32-quadspi.c > > +++ b/drivers/mtd/spi-nor/stm32-quadspi.c > > @@ -355,7 +355,7 @@ static int stm32_qspi_read_reg(struct spi_nor *nor, > > struct device *dev = flash->qspi->dev; > > struct stm32_qspi_cmd cmd; > > > > - dev_dbg(dev, "read_reg: cmd:%#.2x buf:%p len:%#x\n", opcode, buf, len); > > + dev_dbg(dev, "read_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len); > > > > memset(&cmd, 0, sizeof(cmd)); > > cmd.opcode = opcode; > > @@ -376,7 +376,7 @@ static int stm32_qspi_write_reg(struct spi_nor *nor, u8 opcode, > > struct device *dev = flash->qspi->dev; > > struct stm32_qspi_cmd cmd; > > > > - dev_dbg(dev, "write_reg: cmd:%#.2x buf:%p len:%#x\n", opcode, buf, len); > > + dev_dbg(dev, "write_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len); > > > > memset(&cmd, 0, sizeof(cmd)); > > cmd.opcode = opcode; > > @@ -398,7 +398,7 @@ static ssize_t stm32_qspi_read(struct spi_nor *nor, loff_t from, size_t len, > > struct stm32_qspi_cmd cmd; > > int err; > > > > - dev_dbg(qspi->dev, "read(%#.2x): buf:%p from:%#.8x len:%#zx\n", > > + dev_dbg(qspi->dev, "read(%#.2x): buf:%pK from:%#.8x len:%#zx\n", > > nor->read_opcode, buf, (u32)from, len); > > > > memset(&cmd, 0, sizeof(cmd)); > > > >
Am Freitag, 6. Juli 2018, 16:47:32 CEST schrieb Boris Brezillon: > On Fri, 06 Jul 2018 16:44:44 +0200 > Richard Weinberger <richard@nod.at> wrote: > > > Am Freitag, 6. Juli 2018, 15:05:25 CEST schrieb Benjamin Gaignard: > > > The format specifier "%p" can leak kernel addresses. > > > Use "%pK" instead. > > > > Does %pK really make sense for dev_dbg()? > > When the driver is being debugged "leaking" is on purpose. :) > > %p already gives you a hash of the pointer address. At least with %pK > you can turn it off through a sysctl :). Once again I mixed %p and %pK. So then %pK is what we want. :D Thanks, //richard
On Fri, 6 Jul 2018 15:05:25 +0200 Benjamin Gaignard <benjamin.gaignard@linaro.org> wrote: > The format specifier "%p" can leak kernel addresses. > Use "%pK" instead. > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Applied. Thanks, Boris > --- > drivers/mtd/spi-nor/stm32-quadspi.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c > index 72553506a00b..13e9fc961d3b 100644 > --- a/drivers/mtd/spi-nor/stm32-quadspi.c > +++ b/drivers/mtd/spi-nor/stm32-quadspi.c > @@ -355,7 +355,7 @@ static int stm32_qspi_read_reg(struct spi_nor *nor, > struct device *dev = flash->qspi->dev; > struct stm32_qspi_cmd cmd; > > - dev_dbg(dev, "read_reg: cmd:%#.2x buf:%p len:%#x\n", opcode, buf, len); > + dev_dbg(dev, "read_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len); > > memset(&cmd, 0, sizeof(cmd)); > cmd.opcode = opcode; > @@ -376,7 +376,7 @@ static int stm32_qspi_write_reg(struct spi_nor *nor, u8 opcode, > struct device *dev = flash->qspi->dev; > struct stm32_qspi_cmd cmd; > > - dev_dbg(dev, "write_reg: cmd:%#.2x buf:%p len:%#x\n", opcode, buf, len); > + dev_dbg(dev, "write_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len); > > memset(&cmd, 0, sizeof(cmd)); > cmd.opcode = opcode; > @@ -398,7 +398,7 @@ static ssize_t stm32_qspi_read(struct spi_nor *nor, loff_t from, size_t len, > struct stm32_qspi_cmd cmd; > int err; > > - dev_dbg(qspi->dev, "read(%#.2x): buf:%p from:%#.8x len:%#zx\n", > + dev_dbg(qspi->dev, "read(%#.2x): buf:%pK from:%#.8x len:%#zx\n", > nor->read_opcode, buf, (u32)from, len); > > memset(&cmd, 0, sizeof(cmd));
diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c index 72553506a00b..13e9fc961d3b 100644 --- a/drivers/mtd/spi-nor/stm32-quadspi.c +++ b/drivers/mtd/spi-nor/stm32-quadspi.c @@ -355,7 +355,7 @@ static int stm32_qspi_read_reg(struct spi_nor *nor, struct device *dev = flash->qspi->dev; struct stm32_qspi_cmd cmd; - dev_dbg(dev, "read_reg: cmd:%#.2x buf:%p len:%#x\n", opcode, buf, len); + dev_dbg(dev, "read_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len); memset(&cmd, 0, sizeof(cmd)); cmd.opcode = opcode; @@ -376,7 +376,7 @@ static int stm32_qspi_write_reg(struct spi_nor *nor, u8 opcode, struct device *dev = flash->qspi->dev; struct stm32_qspi_cmd cmd; - dev_dbg(dev, "write_reg: cmd:%#.2x buf:%p len:%#x\n", opcode, buf, len); + dev_dbg(dev, "write_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len); memset(&cmd, 0, sizeof(cmd)); cmd.opcode = opcode; @@ -398,7 +398,7 @@ static ssize_t stm32_qspi_read(struct spi_nor *nor, loff_t from, size_t len, struct stm32_qspi_cmd cmd; int err; - dev_dbg(qspi->dev, "read(%#.2x): buf:%p from:%#.8x len:%#zx\n", + dev_dbg(qspi->dev, "read(%#.2x): buf:%pK from:%#.8x len:%#zx\n", nor->read_opcode, buf, (u32)from, len); memset(&cmd, 0, sizeof(cmd));
The format specifier "%p" can leak kernel addresses. Use "%pK" instead. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> --- drivers/mtd/spi-nor/stm32-quadspi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) -- 2.15.0