| Message ID | 20180508135930.5768-2-robh@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | arm: dts: imx: fix IPU OF graph endpoint node names | expand |
Hi Rob, On Tue, May 8, 2018 at 10:59 AM, Rob Herring <robh@kernel.org> wrote: > diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi > index 18b65052553d..654cf2c9b073 100644 > --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi > @@ -379,9 +379,6 @@ > powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */ > > port { > - #address-cells = <1>; > - #size-cells = <0>; > - > ov5640_to_mipi_csi2: endpoint { > remote-endpoint = <&mipi_csi2_in>; > clock-lanes = <0>; > diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > index f019f9900369..c2de2250718c 100644 > --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > @@ -294,9 +294,6 @@ > reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; > > port { > - #address-cells = <1>; > - #size-cells = <0>; > - > ov5640_to_mipi_csi2: endpoint { These two changes seem unrelated and I have already fixed them at: https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/commit/?h=imx/dt&id=1b215c73d1586e6f2586e9a6d6dfaf49cc142b3a BTW, linux-next from today shows no W=1 DTC warnings on imx_v6_v7_defconfig, but maybe new ones are coming soon :-) -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2018-05-08 at 08:59 -0500, Rob Herring wrote: > OF graph endpoint nodes are supposed to be named 'endpoint' with an > address if there is more than one. The i.MX IPU binding graph has used > unique endpoint names instead which now generate dtc warnings: This partially reverts commit 416196cd9099 ("ARM: dts: imx6: fix dtc warnings for ipu endpoints") and also solves the same issue differently by adding reg properties. Should this get a Fixes: tag for these changes? regards Philipp > Warning (graph_endpoint): /soc/ipu@2400000/port@2/disp0-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2400000/port@2/hdmi-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2400000/port@2/mipi-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2400000/port@2/lvds0-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2400000/port@2/lvds1-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2400000/port@3/disp1-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2400000/port@3/hdmi-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2400000/port@3/mipi-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2400000/port@3/lvds0-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2400000/port@3/lvds1-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2800000/port@2/disp0-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2800000/port@2/hdmi-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2800000/port@2/mipi-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2800000/port@2/lvds0-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2800000/port@2/lvds1-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2800000/port@3/hdmi-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2800000/port@3/mipi-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2800000/port@3/lvds0-endpoint: graph endpont node name should be 'endpoint' > Warning (graph_endpoint): /soc/ipu@2800000/port@3/lvds1-endpoint: graph endpont node name should be 'endpoint' > > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > Cc: Fabio Estevam <fabio.estevam@nxp.com> > Signed-off-by: Rob Herring <robh@kernel.org> > --- > arch/arm/boot/dts/imx6q.dtsi | 27 ++++++++++++++------- > arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 3 --- > arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 3 --- > arch/arm/boot/dts/imx6qdl.dtsi | 30 ++++++++++++++++-------- > 4 files changed, 38 insertions(+), 25 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi > index ae7b3f107893..c2fda9d21a17 100644 > --- a/arch/arm/boot/dts/imx6q.dtsi > +++ b/arch/arm/boot/dts/imx6q.dtsi > @@ -162,22 +162,27 @@ > #size-cells = <0>; > reg = <2>; > > - ipu2_di0_disp0: disp0-endpoint { > + ipu2_di0_disp0: endpoint@0 { > + reg = <0>; > }; > > - ipu2_di0_hdmi: hdmi-endpoint { > + ipu2_di0_hdmi: endpoint@1 { > + reg = <1>; > remote-endpoint = <&hdmi_mux_2>; > }; > > - ipu2_di0_mipi: mipi-endpoint { > + ipu2_di0_mipi: endpoint@2 { > + reg = <2>; > remote-endpoint = <&mipi_mux_2>; > }; > > - ipu2_di0_lvds0: lvds0-endpoint { > + ipu2_di0_lvds0: endpoint@3 { > + reg = <3>; > remote-endpoint = <&lvds0_mux_2>; > }; > > - ipu2_di0_lvds1: lvds1-endpoint { > + ipu2_di0_lvds1: endpoint@4 { > + reg = <4>; > remote-endpoint = <&lvds1_mux_2>; > }; > }; > @@ -187,19 +192,23 @@ > #size-cells = <0>; > reg = <3>; > > - ipu2_di1_hdmi: hdmi-endpoint { > + ipu2_di1_hdmi: endpoint@1 { > + reg = <1>; > remote-endpoint = <&hdmi_mux_3>; > }; > > - ipu2_di1_mipi: mipi-endpoint { > + ipu2_di1_mipi: endpoint@2 { > + reg = <2>; > remote-endpoint = <&mipi_mux_3>; > }; > > - ipu2_di1_lvds0: lvds0-endpoint { > + ipu2_di1_lvds0: endpoint@3 { > + reg = <3>; > remote-endpoint = <&lvds0_mux_3>; > }; > > - ipu2_di1_lvds1: lvds1-endpoint { > + ipu2_di1_lvds1: endpoint@4 { > + reg = <4>; > remote-endpoint = <&lvds1_mux_3>; > }; > }; > diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi > index 18b65052553d..654cf2c9b073 100644 > --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi > @@ -379,9 +379,6 @@ > powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */ > > port { > - #address-cells = <1>; > - #size-cells = <0>; > - > ov5640_to_mipi_csi2: endpoint { > remote-endpoint = <&mipi_csi2_in>; > clock-lanes = <0>; > diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > index f019f9900369..c2de2250718c 100644 > --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > @@ -294,9 +294,6 @@ > reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; > > port { > - #address-cells = <1>; > - #size-cells = <0>; > - > ov5640_to_mipi_csi2: endpoint { > remote-endpoint = <&mipi_csi2_in>; > clock-lanes = <0>; > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi > index c003e62bf290..0ebcf057961e 100644 > --- a/arch/arm/boot/dts/imx6qdl.dtsi > +++ b/arch/arm/boot/dts/imx6qdl.dtsi > @@ -1300,22 +1300,27 @@ > #size-cells = <0>; > reg = <2>; > > - ipu1_di0_disp0: disp0-endpoint { > + ipu1_di0_disp0: endpoint@0 { > + reg = <0>; > }; > > - ipu1_di0_hdmi: hdmi-endpoint { > + ipu1_di0_hdmi: endpoint@1 { > + reg = <1>; > remote-endpoint = <&hdmi_mux_0>; > }; > > - ipu1_di0_mipi: mipi-endpoint { > + ipu1_di0_mipi: endpoint@2 { > + reg = <2>; > remote-endpoint = <&mipi_mux_0>; > }; > > - ipu1_di0_lvds0: lvds0-endpoint { > + ipu1_di0_lvds0: endpoint@3 { > + reg = <3>; > remote-endpoint = <&lvds0_mux_0>; > }; > > - ipu1_di0_lvds1: lvds1-endpoint { > + ipu1_di0_lvds1: endpoint@4 { > + reg = <4>; > remote-endpoint = <&lvds1_mux_0>; > }; > }; > @@ -1325,22 +1330,27 @@ > #size-cells = <0>; > reg = <3>; > > - ipu1_di1_disp1: disp1-endpoint { > + ipu1_di1_disp1: endpoint@0 { > + reg = <0>; > }; > > - ipu1_di1_hdmi: hdmi-endpoint { > + ipu1_di1_hdmi: endpoint@1 { > + reg = <1>; > remote-endpoint = <&hdmi_mux_1>; > }; > > - ipu1_di1_mipi: mipi-endpoint { > + ipu1_di1_mipi: endpoint@2 { > + reg = <2>; > remote-endpoint = <&mipi_mux_1>; > }; > > - ipu1_di1_lvds0: lvds0-endpoint { > + ipu1_di1_lvds0: endpoint@3 { > + reg = <3>; > remote-endpoint = <&lvds0_mux_1>; > }; > > - ipu1_di1_lvds1: lvds1-endpoint { > + ipu1_di1_lvds1: endpoint@4 { > + reg = <4>; > remote-endpoint = <&lvds1_mux_1>; > }; > }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, May 8, 2018 at 9:06 AM, Fabio Estevam <festevam@gmail.com> wrote: > Hi Rob, > > On Tue, May 8, 2018 at 10:59 AM, Rob Herring <robh@kernel.org> wrote: > >> diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi >> index 18b65052553d..654cf2c9b073 100644 >> --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi >> +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi >> @@ -379,9 +379,6 @@ >> powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */ >> >> port { >> - #address-cells = <1>; >> - #size-cells = <0>; >> - >> ov5640_to_mipi_csi2: endpoint { >> remote-endpoint = <&mipi_csi2_in>; >> clock-lanes = <0>; >> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi >> index f019f9900369..c2de2250718c 100644 >> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi >> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi >> @@ -294,9 +294,6 @@ >> reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; >> >> port { >> - #address-cells = <1>; >> - #size-cells = <0>; >> - >> ov5640_to_mipi_csi2: endpoint { > > These two changes seem unrelated and I have already fixed them at: > https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/commit/?h=imx/dt&id=1b215c73d1586e6f2586e9a6d6dfaf49cc142b3a Right. Will drop them. > > BTW, linux-next from today shows no W=1 DTC warnings on > imx_v6_v7_defconfig, but maybe new ones are coming soon :-) I just sent out the dtc update patch shortly before this one. I'll probably add it to -next today. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, May 8, 2018 at 9:19 AM, Philipp Zabel <p.zabel@pengutronix.de> wrote: > On Tue, 2018-05-08 at 08:59 -0500, Rob Herring wrote: >> OF graph endpoint nodes are supposed to be named 'endpoint' with an >> address if there is more than one. The i.MX IPU binding graph has used >> unique endpoint names instead which now generate dtc warnings: > > This partially reverts commit 416196cd9099 ("ARM: dts: imx6: fix dtc > warnings for ipu endpoints") and also solves the same issue differently > by adding reg properties. Should this get a Fixes: tag for these > changes? Yes, I'd missed that. This has become my concern with the dtc warnings. They are often fixed in the wrong way to silence warnings. This one is trivial, but sometimes they point to deeper issues like poor binding design. This is certainly true for the new unique_unit_address check. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, May 08, 2018 at 10:22:29AM -0500, Rob Herring wrote: > On Tue, May 8, 2018 at 9:06 AM, Fabio Estevam <festevam@gmail.com> wrote: > > Hi Rob, > > > > On Tue, May 8, 2018 at 10:59 AM, Rob Herring <robh@kernel.org> wrote: > > > >> diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi > >> index 18b65052553d..654cf2c9b073 100644 > >> --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi > >> +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi > >> @@ -379,9 +379,6 @@ > >> powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */ > >> > >> port { > >> - #address-cells = <1>; > >> - #size-cells = <0>; > >> - > >> ov5640_to_mipi_csi2: endpoint { > >> remote-endpoint = <&mipi_csi2_in>; > >> clock-lanes = <0>; > >> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > >> index f019f9900369..c2de2250718c 100644 > >> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > >> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > >> @@ -294,9 +294,6 @@ > >> reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; > >> > >> port { > >> - #address-cells = <1>; > >> - #size-cells = <0>; > >> - > >> ov5640_to_mipi_csi2: endpoint { > > > > These two changes seem unrelated and I have already fixed them at: > > https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/commit/?h=imx/dt&id=1b215c73d1586e6f2586e9a6d6dfaf49cc142b3a > > Right. Will drop them. Applied. The git am command dropped them automatically. Thanks. Shawn -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index ae7b3f107893..c2fda9d21a17 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -162,22 +162,27 @@ #size-cells = <0>; reg = <2>; - ipu2_di0_disp0: disp0-endpoint { + ipu2_di0_disp0: endpoint@0 { + reg = <0>; }; - ipu2_di0_hdmi: hdmi-endpoint { + ipu2_di0_hdmi: endpoint@1 { + reg = <1>; remote-endpoint = <&hdmi_mux_2>; }; - ipu2_di0_mipi: mipi-endpoint { + ipu2_di0_mipi: endpoint@2 { + reg = <2>; remote-endpoint = <&mipi_mux_2>; }; - ipu2_di0_lvds0: lvds0-endpoint { + ipu2_di0_lvds0: endpoint@3 { + reg = <3>; remote-endpoint = <&lvds0_mux_2>; }; - ipu2_di0_lvds1: lvds1-endpoint { + ipu2_di0_lvds1: endpoint@4 { + reg = <4>; remote-endpoint = <&lvds1_mux_2>; }; }; @@ -187,19 +192,23 @@ #size-cells = <0>; reg = <3>; - ipu2_di1_hdmi: hdmi-endpoint { + ipu2_di1_hdmi: endpoint@1 { + reg = <1>; remote-endpoint = <&hdmi_mux_3>; }; - ipu2_di1_mipi: mipi-endpoint { + ipu2_di1_mipi: endpoint@2 { + reg = <2>; remote-endpoint = <&mipi_mux_3>; }; - ipu2_di1_lvds0: lvds0-endpoint { + ipu2_di1_lvds0: endpoint@3 { + reg = <3>; remote-endpoint = <&lvds0_mux_3>; }; - ipu2_di1_lvds1: lvds1-endpoint { + ipu2_di1_lvds1: endpoint@4 { + reg = <4>; remote-endpoint = <&lvds1_mux_3>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 18b65052553d..654cf2c9b073 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -379,9 +379,6 @@ powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */ port { - #address-cells = <1>; - #size-cells = <0>; - ov5640_to_mipi_csi2: endpoint { remote-endpoint = <&mipi_csi2_in>; clock-lanes = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index f019f9900369..c2de2250718c 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -294,9 +294,6 @@ reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; port { - #address-cells = <1>; - #size-cells = <0>; - ov5640_to_mipi_csi2: endpoint { remote-endpoint = <&mipi_csi2_in>; clock-lanes = <0>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index c003e62bf290..0ebcf057961e 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1300,22 +1300,27 @@ #size-cells = <0>; reg = <2>; - ipu1_di0_disp0: disp0-endpoint { + ipu1_di0_disp0: endpoint@0 { + reg = <0>; }; - ipu1_di0_hdmi: hdmi-endpoint { + ipu1_di0_hdmi: endpoint@1 { + reg = <1>; remote-endpoint = <&hdmi_mux_0>; }; - ipu1_di0_mipi: mipi-endpoint { + ipu1_di0_mipi: endpoint@2 { + reg = <2>; remote-endpoint = <&mipi_mux_0>; }; - ipu1_di0_lvds0: lvds0-endpoint { + ipu1_di0_lvds0: endpoint@3 { + reg = <3>; remote-endpoint = <&lvds0_mux_0>; }; - ipu1_di0_lvds1: lvds1-endpoint { + ipu1_di0_lvds1: endpoint@4 { + reg = <4>; remote-endpoint = <&lvds1_mux_0>; }; }; @@ -1325,22 +1330,27 @@ #size-cells = <0>; reg = <3>; - ipu1_di1_disp1: disp1-endpoint { + ipu1_di1_disp1: endpoint@0 { + reg = <0>; }; - ipu1_di1_hdmi: hdmi-endpoint { + ipu1_di1_hdmi: endpoint@1 { + reg = <1>; remote-endpoint = <&hdmi_mux_1>; }; - ipu1_di1_mipi: mipi-endpoint { + ipu1_di1_mipi: endpoint@2 { + reg = <2>; remote-endpoint = <&mipi_mux_1>; }; - ipu1_di1_lvds0: lvds0-endpoint { + ipu1_di1_lvds0: endpoint@3 { + reg = <3>; remote-endpoint = <&lvds0_mux_1>; }; - ipu1_di1_lvds1: lvds1-endpoint { + ipu1_di1_lvds1: endpoint@4 { + reg = <4>; remote-endpoint = <&lvds1_mux_1>; }; };
OF graph endpoint nodes are supposed to be named 'endpoint' with an address if there is more than one. The i.MX IPU binding graph has used unique endpoint names instead which now generate dtc warnings: Warning (graph_endpoint): /soc/ipu@2400000/port@2/disp0-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2400000/port@2/hdmi-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2400000/port@2/mipi-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2400000/port@2/lvds0-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2400000/port@2/lvds1-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2400000/port@3/disp1-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2400000/port@3/hdmi-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2400000/port@3/mipi-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2400000/port@3/lvds0-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2400000/port@3/lvds1-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2800000/port@2/disp0-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2800000/port@2/hdmi-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2800000/port@2/mipi-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2800000/port@2/lvds0-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2800000/port@2/lvds1-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2800000/port@3/hdmi-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2800000/port@3/mipi-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2800000/port@3/lvds0-endpoint: graph endpont node name should be 'endpoint' Warning (graph_endpoint): /soc/ipu@2800000/port@3/lvds1-endpoint: graph endpont node name should be 'endpoint' Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> --- arch/arm/boot/dts/imx6q.dtsi | 27 ++++++++++++++------- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 3 --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 3 --- arch/arm/boot/dts/imx6qdl.dtsi | 30 ++++++++++++++++-------- 4 files changed, 38 insertions(+), 25 deletions(-) -- 2.17.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html