diff mbox series

[11/18] warp7: Add Kconfig WARP7_ROOT_PART

Message ID 1522419526-29494-12-git-send-email-bryan.odonoghue@linaro.org
State Superseded
Headers show
Series warp7: Enable automated OPTEE/HAB boot flow | expand

Commit Message

Bryan O'Donoghue March 30, 2018, 2:18 p.m. UTC 
Adding CONFIG_WARP7_ROOT_PART allows a defconfig to specify which partition
is use as the root partition on WaRP7, this is a desirable change in order
to support a different partitioning schemes. The default is the current
partition #1.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 board/warp7/Kconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Fabio Estevam March 30, 2018, 3:01 p.m. UTC | #1 
Hi Bryan,

On Fri, Mar 30, 2018 at 11:18 AM, Bryan O'Donoghue
<bryan.odonoghue@linaro.org> wrote:
> Adding CONFIG_WARP7_ROOT_PART allows a defconfig to specify which partition
> is use as the root partition on WaRP7, this is a desirable change in order
> to support a different partitioning schemes. The default is the current
> partition #1.

I think you meant "partition #2" here instead.
diff mbox series

Patch

diff --git a/board/warp7/Kconfig b/board/warp7/Kconfig
index 00df19d..c089bca 100644
--- a/board/warp7/Kconfig
+++ b/board/warp7/Kconfig
@@ -6,6 +6,14 @@  config SYS_BOARD
 config SYS_CONFIG_NAME
 	default "warp7"
 
+config WARP7_ROOT_PART
+	int "Partition number to use for root filesystem"
+	default 2
+	help
+	  The partition number to use for root filesystem this is the
+	  partition that is typically specified with root=/dev/sdaX or
+	  which gets converted into a root=PARTUUID=some_uuid.
+
 config SYS_FDT_ADDR
 	hex "FDT load address"
 	default 0x83000000