Message ID | 1518806331-7101-1-git-send-email-yamada.masahiro@socionext.com |
---|---|
Headers | show |
Series | kconfig: move compiler capability tests to Kconfig | expand |
Hi Masahiro. On Sat, Feb 17, 2018 at 03:38:28AM +0900, Masahiro Yamada wrote: > I brushed up the implementation in this version. > > In the previous RFC, CC_HAS_ was described by using 'option shell=', > like this: > > config CC_HAS_STACKPROTECTOR > bool > option shell="$CC -Werror -fstack-protector -c -x c /dev/null" > > After I thought a bit more, the following syntax is more grammatical, > and flexible. > > config CC_HAS_STACKPROTECTOR > bool > default $(shell $CC -Werror -fstack-protector -c -x c /dev/null) Looks good - but maybe we should go one step further. So we in the syntax explicit handles: - shell commands - other commands, defined as strings - environment variables - config variables Each case is explicit - so the reader is not confused what is used when. $(shell foo) - output of the shell command foo. Uses $SHELL as the shell. May include optional paramters. foo may be a config variable referenced using ${} or a config variable prefixed with $ Example: config BUILD_DIR string default $(shell cd ${objtree}; pwd) $(call bar) - output of the bar command that may take optional parameters. bar may be a text string, a config variable or an environment variable The definition of bar may reference the parameters using $(1), $(2) In this context a config variable needs to be prefixed with $ Example: config reverse string default $(2) $(1) config NEW_ORDER string $(call $reverse, A, B) # Will assign REVERSE the value "B A" Example2: config CC_OPTION string default $(shell ${srctree}/scripts/cc-option ${CC} $(1) $(2)) config CC_OPTIMIZE string $(call $CC_OPTION, -Oz, -Os) ${FOO} - environment variable The above is inspired by how make implement similar functionality. I'm not happy that we in one context can reference CONFIG variables directly, but inside the $(call ...) and $(shell ...) needs the $ prefix. But I could not come up with something un-ambigious where this could be avoided. The above proposal include the functionality of the macro stuff proposed in this patch-set. But with a simpler syntax and we keep all the other kconfig logic (depends on etc) - so users will not be limited in their creativity. > Current limitations: > > Dependency on outside scripts. > Inter-option dependency: > Functions are evaluated statically: Same limitations exists with the syntax suggested above. Sam
Hello, On Sun, Feb 18, 2018 at 11:13 PM, Sam Ravnborg <sam@ravnborg.org> wrote: > Hi Masahiro. > > On Sat, Feb 17, 2018 at 03:38:28AM +0900, Masahiro Yamada wrote: >> I brushed up the implementation in this version. >> >> In the previous RFC, CC_HAS_ was described by using 'option shell=', >> like this: >> >> config CC_HAS_STACKPROTECTOR >> bool >> option shell="$CC -Werror -fstack-protector -c -x c /dev/null" >> >> After I thought a bit more, the following syntax is more grammatical, >> and flexible. >> >> config CC_HAS_STACKPROTECTOR >> bool >> default $(shell $CC -Werror -fstack-protector -c -x c /dev/null) > > Looks good - but maybe we should go one step further. > > So we in the syntax explicit handles: > - shell commands > - other commands, defined as strings > - environment variables > - config variables > > Each case is explicit - so the reader is not confused what is used when. > > $(shell foo) - output of the shell command foo. Uses $SHELL as the shell. > May include optional paramters. > foo may be a config variable referenced using ${} or a config variable prefixed with $ > Example: > > config BUILD_DIR > string > default $(shell cd ${objtree}; pwd) > > $(call bar) - output of the bar command that may take optional parameters. > bar may be a text string, a config variable or an environment variable > The definition of bar may reference the parameters using $(1), $(2) > In this context a config variable needs to be prefixed with $ > > Example: > > config reverse > string > default $(2) $(1) > > config NEW_ORDER > string > $(call $reverse, A, B) # Will assign REVERSE the value "B A" > > > Example2: > > config CC_OPTION > string > default $(shell ${srctree}/scripts/cc-option ${CC} $(1) $(2)) > > config CC_OPTIMIZE > string > $(call $CC_OPTION, -Oz, -Os) > > > ${FOO} - environment variable > > The above is inspired by how make implement similar functionality. > > I'm not happy that we in one context can reference CONFIG variables > directly, but inside the $(call ...) and $(shell ...) needs the $ prefix. > But I could not come up with something un-ambigious where this could be avoided. I think we should be careful about allowing references to config symbols. It mixes up the parsing and evaluation phases, since $() is expanded during parsing (which I consider a feature and think is needed to retain sanity). Patch 06/23 removes the last existing instance of symbol references in strings by getting rid of 'option env'. That's an improvement to me. We shouldn't add it back. > > The above proposal include the functionality of the macro stuff proposed in this patch-set. > But with a simpler syntax and we keep all the other kconfig logic (depends on etc) - so > users will not be limited in their creativity. > >> Current limitations: >> >> Dependency on outside scripts. >> Inter-option dependency: >> Functions are evaluated statically: > > Same limitations exists with the syntax suggested above. > > Sam Cheers, Ulf
2018-02-20 0:18 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: >> >> I'm not happy that we in one context can reference CONFIG variables >> directly, but inside the $(call ...) and $(shell ...) needs the $ prefix. >> But I could not come up with something un-ambigious where this could be avoided. > > I think we should be careful about allowing references to config > symbols. It mixes up the parsing and evaluation phases, since $() is > expanded during parsing (which I consider a feature and think is > needed to retain sanity). > > Patch 06/23 removes the last existing instance of symbol references in > strings by getting rid of 'option env'. That's an improvement to me. > We shouldn't add it back. This is really important design decision, so I'd like to hear a little more from experts. For example, x86 allows users to choose sub-arch, either 'i386' or 'x86_64'. https://github.com/torvalds/linux/blob/v4.16-rc2/arch/x86/Kconfig#L4 If the user toggles CONFIG_64BIT, the bi-arch compiler will work in a slightly different mode (at least, back-end parts) So, my question is, is there a case, $(cc-option, -m32 -foo) is y, but $(cc-option, -m64 -foo) is n ? (or vice versa) If the answer is yes, $(cc-option -foo) would have to be re-calculated every time CONFIG_64BIT is toggled. This is what I'd like to avoid, though. -- Best Regards Masahiro Yamada
On Wed, Feb 21, 2018 at 8:38 AM, Masahiro Yamada <yamada.masahiro@socionext.com> wrote: > 2018-02-20 0:18 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: > >>> >>> I'm not happy that we in one context can reference CONFIG variables >>> directly, but inside the $(call ...) and $(shell ...) needs the $ prefix. >>> But I could not come up with something un-ambigious where this could be avoided. >> >> I think we should be careful about allowing references to config >> symbols. It mixes up the parsing and evaluation phases, since $() is >> expanded during parsing (which I consider a feature and think is >> needed to retain sanity). >> >> Patch 06/23 removes the last existing instance of symbol references in >> strings by getting rid of 'option env'. That's an improvement to me. >> We shouldn't add it back. > > > This is really important design decision, > so I'd like to hear a little more from experts. > > > For example, x86 allows users to choose sub-arch, either 'i386' or 'x86_64'. > > https://github.com/torvalds/linux/blob/v4.16-rc2/arch/x86/Kconfig#L4 > > > > If the user toggles CONFIG_64BIT, > the bi-arch compiler will work in a slightly different mode > (at least, back-end parts) > > So, my question is, is there a case, > > $(cc-option, -m32 -foo) is y, but > $(cc-option, -m64 -foo) is n ? > (or vice versa) > > > If the answer is yes, $(cc-option -foo) would have to be re-calculated > every time CONFIG_64BIT is toggled. > > This is what I'd like to avoid, though. The -m32/-m64 trick (and -mbig-endian/-mlittle-endian on other architectures as well as a couple of other flags) only works if the compiler is configured to support it. In other cases (e.g. big-endian xtensa), the kernel always detects what the compiler does and silently configures itself to match using Makefile logic. On x86, compilers are usually built as bi-arch, but you can build one that only allows one of them. I can see two reasonable ways out: - we don't use $(cc-option -foo) in a case like this, and instead require the user to have a matching toolchain. - we could make the 32/64 selection on x86 a 'choice' statement where each option depends on both the ARCH= variable and the $(cc-option, -m32)/ $(cc-option, -m64) output. Arnd
2018-02-21 18:56 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: > On Wed, Feb 21, 2018 at 8:38 AM, Masahiro Yamada > <yamada.masahiro@socionext.com> wrote: >> 2018-02-20 0:18 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: >> >>>> >>>> I'm not happy that we in one context can reference CONFIG variables >>>> directly, but inside the $(call ...) and $(shell ...) needs the $ prefix. >>>> But I could not come up with something un-ambigious where this could be avoided. >>> >>> I think we should be careful about allowing references to config >>> symbols. It mixes up the parsing and evaluation phases, since $() is >>> expanded during parsing (which I consider a feature and think is >>> needed to retain sanity). >>> >>> Patch 06/23 removes the last existing instance of symbol references in >>> strings by getting rid of 'option env'. That's an improvement to me. >>> We shouldn't add it back. >> >> >> This is really important design decision, >> so I'd like to hear a little more from experts. >> >> >> For example, x86 allows users to choose sub-arch, either 'i386' or 'x86_64'. >> >> https://github.com/torvalds/linux/blob/v4.16-rc2/arch/x86/Kconfig#L4 >> >> >> >> If the user toggles CONFIG_64BIT, >> the bi-arch compiler will work in a slightly different mode >> (at least, back-end parts) >> >> So, my question is, is there a case, >> >> $(cc-option, -m32 -foo) is y, but >> $(cc-option, -m64 -foo) is n ? >> (or vice versa) >> >> >> If the answer is yes, $(cc-option -foo) would have to be re-calculated >> every time CONFIG_64BIT is toggled. >> >> This is what I'd like to avoid, though. > > The -m32/-m64 trick (and -mbig-endian/-mlittle-endian on other architectures > as well as a couple of other flags) only works if the compiler is configured to > support it. In other cases (e.g. big-endian xtensa), the kernel always > detects what the compiler does and silently configures itself to match > using Makefile logic. > > On x86, compilers are usually built as bi-arch, but you can build one that > only allows one of them. > > I can see two reasonable ways out: > > - we don't use $(cc-option -foo) in a case like this, and instead require the > user to have a matching toolchain. > - we could make the 32/64 selection on x86 a 'choice' statement where > each option depends on both the ARCH= variable and the > $(cc-option, -m32)/ $(cc-option, -m64) output. > > Arnd Let me clarify my concern. When we test the compiler flag, is there a case where a particular flag depends on -m{32,64} ? For example, is there a compiler that supports -fstack-protector for 64bit mode, but unsupports it for 32bit mode? $(cc-option -m32) -> y $(cc-option -m64) -> y $(cc-option -fstack-protector) -> y $(cc-option -m32 -fstack-protector) -> n $(cc-option -m64 -fstack-protector) -> y I guess this is unlikely to happen, but I am not whether it is zero possibility. If this could happen, $(cc-option ) must be evaluated together with correct bi-arch option (either -m32 or -m64). Currently, -m32/-m64 is specified in Makefile, but we are moving compiler tests to Kconfig and, CONFIG_64BIT can be dynamically toggled in Kconfig. -- Best Regards Masahiro Yamada
On Wed, Feb 21, 2018 at 11:20 AM, Masahiro Yamada <yamada.masahiro@socionext.com> wrote: > 2018-02-21 18:56 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: >> On Wed, Feb 21, 2018 at 8:38 AM, Masahiro Yamada >> <yamada.masahiro@socionext.com> wrote: >>> 2018-02-20 0:18 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: > > Let me clarify my concern. > > When we test the compiler flag, is there a case > where a particular flag depends on -m{32,64} ? > > For example, is there a compiler that supports -fstack-protector > for 64bit mode, but unsupports it for 32bit mode? > > $(cc-option -m32) -> y > $(cc-option -m64) -> y > $(cc-option -fstack-protector) -> y > $(cc-option -m32 -fstack-protector) -> n > $(cc-option -m64 -fstack-protector) -> y > > I guess this is unlikely to happen, > but I am not whether it is zero possibility. > > If this could happen, > $(cc-option ) must be evaluated together with > correct bi-arch option (either -m32 or -m64). > > > Currently, -m32/-m64 is specified in Makefile, > but we are moving compiler tests to Kconfig > and, CONFIG_64BIT can be dynamically toggled in Kconfig. I don't think it can happen for this particular combination (stack protector and word size), but I'm sure we'll eventually run into options that need to be tested in combination. For the current CFLAGS_KERNEL setting, we definitely have the case of needing the variables to be evaluated in a specific order. Arnd
2018-02-21 19:52 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: > On Wed, Feb 21, 2018 at 11:20 AM, Masahiro Yamada > <yamada.masahiro@socionext.com> wrote: >> 2018-02-21 18:56 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: >>> On Wed, Feb 21, 2018 at 8:38 AM, Masahiro Yamada >>> <yamada.masahiro@socionext.com> wrote: >>>> 2018-02-20 0:18 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: >> >> Let me clarify my concern. >> >> When we test the compiler flag, is there a case >> where a particular flag depends on -m{32,64} ? >> >> For example, is there a compiler that supports -fstack-protector >> for 64bit mode, but unsupports it for 32bit mode? >> >> $(cc-option -m32) -> y >> $(cc-option -m64) -> y >> $(cc-option -fstack-protector) -> y >> $(cc-option -m32 -fstack-protector) -> n >> $(cc-option -m64 -fstack-protector) -> y >> >> I guess this is unlikely to happen, >> but I am not whether it is zero possibility. >> >> If this could happen, >> $(cc-option ) must be evaluated together with >> correct bi-arch option (either -m32 or -m64). >> >> >> Currently, -m32/-m64 is specified in Makefile, >> but we are moving compiler tests to Kconfig >> and, CONFIG_64BIT can be dynamically toggled in Kconfig. > > I don't think it can happen for this particular combination (stack protector > and word size), but I'm sure we'll eventually run into options that > need to be tested in combination. For the current CFLAGS_KERNEL > setting, we definitely have the case of needing the variables to be > evaluated in a specific order. > I was thinking of how we can handle complex cases in the current approach. (Case 1) Compiler flag -foo and -bar interacts, so we also need to check the combination of the two. config CC_HAS_FOO def_bool $(cc-option -foo) config CC_HAS_BAR def_bool $(cc-option -bar) config CC_HAS_FOO_WITH_BAR def_bool $(cc-option -foo -bar) (Case 2) Compiler flag -foo is sensitive to word-size. So, we need to test this option together with -m32/-m64. User can toggle CONFIG_64BIT, like i386/x86_64. config CC_NEEDS_M64 def_bool $(cc-option -m64) && 64BIT config CC_NEEDS_M32 def_bool $(cc-option -m32) && !64BIT config CC_HAS_FOO bool default $(cc-option -m64 -foo) if CC_NEEDS_M64 default $(cc-option -m32 -foo) if CC_NEEDS_M32 default $(cc-option -foo) (Case 3) Compiler flag -foo is sensitive to endian-ness. config CC_NEEDS_BIG_ENDIAN def_bool $(cc-option -mbig-endian) && CPU_BIG_ENDIAN config CC_NEEDS_LITTLE_ENDIAN def_bool $(cc-option -mlittle-endian) && CPU_LITTLE_ENDIAN config CC_HAS_FOO bool default $(cc-option -mbig-endian -foo) if CC_NEEDS_BIG_ENDIAN default $(cc-option -mlittle-endian -foo) if CC_NEEDS_LITTLE_ENDIAN default $(cc-option -foo) Hmm, I think I can implement those somehow. But, I hope we do not have many instances like this... If you know more naive cases, please share your knowledge. Thanks! -- Best Regards Masahiro Yamada
On Wed, Feb 21, 2018 at 1:57 PM, Masahiro Yamada <yamada.masahiro@socionext.com> wrote: > 2018-02-21 19:52 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: >> On Wed, Feb 21, 2018 at 11:20 AM, Masahiro Yamada >> <yamada.masahiro@socionext.com> wrote: >>> 2018-02-21 18:56 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: >>>> On Wed, Feb 21, 2018 at 8:38 AM, Masahiro Yamada >>>> <yamada.masahiro@socionext.com> wrote: >>>>> 2018-02-20 0:18 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: > > Hmm, I think I can implement those somehow. > But, I hope we do not have many instances like this... > > > If you know more naive cases, please share your knowledge. > One case that comes to mind would be architecture level selection on 32-bit ARM, which is roughly this (I probably have some details wrong, but you get the idea): - older compilers don't support the latest architecture setting (-march=armv8 or -march=armv7ve) - newer compilers no longer support really old architectures (-march=armv4) - setting -mthumb requires setting one of -march=armv7-a, armv7ve, armv7-m or armv8 if the compiler doesn't default to those - on a compiler that defaults to -marm, setting -march=armv7-m requires setting -mthumb (IIRC) - really old compilers only support OABI, but not EABI - newer compilers no longer support OABI - mthumb requires EABI - armv6 and higher are subtly broken with OABI, but only when using certain inline assembly with 64-bit arguments in register pairs. I think we just shouldn't try to capture all of the above correctly in Kconfig conditionals. Arnd
On Wed, Feb 21, 2018 at 09:57:03PM +0900, Masahiro Yamada wrote: > 2018-02-21 19:52 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: > > On Wed, Feb 21, 2018 at 11:20 AM, Masahiro Yamada > > <yamada.masahiro@socionext.com> wrote: > >> 2018-02-21 18:56 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: > >>> On Wed, Feb 21, 2018 at 8:38 AM, Masahiro Yamada > >>> <yamada.masahiro@socionext.com> wrote: > >>>> 2018-02-20 0:18 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: > >> > >> Let me clarify my concern. > >> > >> When we test the compiler flag, is there a case > >> where a particular flag depends on -m{32,64} ? > >> > >> For example, is there a compiler that supports -fstack-protector > >> for 64bit mode, but unsupports it for 32bit mode? > >> > >> $(cc-option -m32) -> y > >> $(cc-option -m64) -> y > >> $(cc-option -fstack-protector) -> y > >> $(cc-option -m32 -fstack-protector) -> n > >> $(cc-option -m64 -fstack-protector) -> y > >> > >> I guess this is unlikely to happen, > >> but I am not whether it is zero possibility. > >> > >> If this could happen, > >> $(cc-option ) must be evaluated together with > >> correct bi-arch option (either -m32 or -m64). > >> > >> > >> Currently, -m32/-m64 is specified in Makefile, > >> but we are moving compiler tests to Kconfig > >> and, CONFIG_64BIT can be dynamically toggled in Kconfig. > > > > I don't think it can happen for this particular combination (stack protector > > and word size), but I'm sure we'll eventually run into options that > > need to be tested in combination. For the current CFLAGS_KERNEL > > setting, we definitely have the case of needing the variables to be > > evaluated in a specific order. > > > > > > > I was thinking of how we can handle complex cases > in the current approach. > > > > (Case 1) > > Compiler flag -foo and -bar interacts, so > we also need to check the combination of the two. > > > config CC_HAS_FOO > def_bool $(cc-option -foo) > > config CC_HAS_BAR > def_bool $(cc-option -bar) > > config CC_HAS_FOO_WITH_BAR > def_bool $(cc-option -foo -bar) > > > > (Case 2) > Compiler flag -foo is sensitive to word-size. > So, we need to test this option together with -m32/-m64. > User can toggle CONFIG_64BIT, like i386/x86_64. > > > config CC_NEEDS_M64 > def_bool $(cc-option -m64) && 64BIT > > config CC_NEEDS_M32 > def_bool $(cc-option -m32) && !64BIT > > config CC_HAS_FOO > bool > default $(cc-option -m64 -foo) if CC_NEEDS_M64 > default $(cc-option -m32 -foo) if CC_NEEDS_M32 > default $(cc-option -foo) > > > > (Case 3) > Compiler flag -foo is sensitive to endian-ness. > > > config CC_NEEDS_BIG_ENDIAN > def_bool $(cc-option -mbig-endian) && CPU_BIG_ENDIAN > > config CC_NEEDS_LITTLE_ENDIAN > def_bool $(cc-option -mlittle-endian) && CPU_LITTLE_ENDIAN > > config CC_HAS_FOO > bool > default $(cc-option -mbig-endian -foo) if CC_NEEDS_BIG_ENDIAN > default $(cc-option -mlittle-endian -foo) if CC_NEEDS_LITTLE_ENDIAN > default $(cc-option -foo) > > > > > Hmm, I think I can implement those somehow. > But, I hope we do not have many instances like this... > > > If you know more naive cases, please share your knowledge. > > Thanks! > > > -- > Best Regards > Masahiro Yamada Would get pretty bad if a test needs to consider multiple symbols. Exponential explosion there... I thought some more about the implementation of dynamic (post-parsing) functions to see how bad it would get with the current implementation. Some background on how things work now: 1. All expression operands in Kconfig are symbols. 2. Returning '$ENV' or '$(fn foo)' as a T_WORD during parsing gets you symbols with those strings as names and S_UNKNOWN type (because they act like references to undefined symbols). 3. For "foo-$(fn foo)", you also get a symbol with that string as its name and S_UNKNOWN type (stored among the SYMBOL_CONST symbols) 4. Symbols with S_UNKNOWN type get their name as their string value, and the tristate value n. So, if you do string expansion on the names of symbols with S_UNKNOWN type in sym_calc_value(), you're almost there with the current implementation, except for the tristate case. Maybe you could set the tristate value of S_UNKNOWN symbols depending on the string value you end up with. Things are getting pretty confusing at that point. Could have something like S_DYNAMIC as well. More Kconfig complexity... Then there's other complications: 1. SYMBOL_CONST is no longer constant. 2. Dependency loop detection needs to consider symbol references within strings. 3. Dependency loop detection relies on static knowledge of what symbols a symbol depends on. That might get messy for certain expansions, though it might be things you wouldn't do in practice. 4. Symbols still need to be properly invalidated. It looks like at least menuconfig just does a dumb invalidate-everything whenever the value of a symbol is changed though, so it might not require extra work. (Bit messier in Kconfiglib, which does minimal invalidation to keep scripts fast, but just need to extract a few extra deps there.) It looks like dynamic functions could get quite messy, but might be doable if absolutely required. There's probably more devils in the details though. I don't think the static function model precludes switching models later btw, when people have more experience. Cheers, Ulf
Masahiro Yamada <yamada.masahiro@socionext.com> writes: > <snip> > > (Case 3) > Compiler flag -foo is sensitive to endian-ness. > > > config CC_NEEDS_BIG_ENDIAN > def_bool $(cc-option -mbig-endian) && CPU_BIG_ENDIAN > > config CC_NEEDS_LITTLE_ENDIAN > def_bool $(cc-option -mlittle-endian) && CPU_LITTLE_ENDIAN > > config CC_HAS_FOO > bool > default $(cc-option -mbig-endian -foo) if CC_NEEDS_BIG_ENDIAN > default $(cc-option -mlittle-endian -foo) if CC_NEEDS_LITTLE_ENDIAN > default $(cc-option -foo) We may do something like this on powerpc, where we have 32/64-bit and big/little endian (on 64-bit) and then some ABI options that we set/unset depending on endian. The above looks like it could work though. cheers
2018-02-22 6:39 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: > On Wed, Feb 21, 2018 at 09:57:03PM +0900, Masahiro Yamada wrote: >> 2018-02-21 19:52 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: >> > On Wed, Feb 21, 2018 at 11:20 AM, Masahiro Yamada >> > <yamada.masahiro@socionext.com> wrote: >> >> 2018-02-21 18:56 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: >> >>> On Wed, Feb 21, 2018 at 8:38 AM, Masahiro Yamada >> >>> <yamada.masahiro@socionext.com> wrote: >> >>>> 2018-02-20 0:18 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: >> >> >> >> Let me clarify my concern. >> >> >> >> When we test the compiler flag, is there a case >> >> where a particular flag depends on -m{32,64} ? >> >> >> >> For example, is there a compiler that supports -fstack-protector >> >> for 64bit mode, but unsupports it for 32bit mode? >> >> >> >> $(cc-option -m32) -> y >> >> $(cc-option -m64) -> y >> >> $(cc-option -fstack-protector) -> y >> >> $(cc-option -m32 -fstack-protector) -> n >> >> $(cc-option -m64 -fstack-protector) -> y >> >> >> >> I guess this is unlikely to happen, >> >> but I am not whether it is zero possibility. >> >> >> >> If this could happen, >> >> $(cc-option ) must be evaluated together with >> >> correct bi-arch option (either -m32 or -m64). >> >> >> >> >> >> Currently, -m32/-m64 is specified in Makefile, >> >> but we are moving compiler tests to Kconfig >> >> and, CONFIG_64BIT can be dynamically toggled in Kconfig. >> > >> > I don't think it can happen for this particular combination (stack protector >> > and word size), but I'm sure we'll eventually run into options that >> > need to be tested in combination. For the current CFLAGS_KERNEL >> > setting, we definitely have the case of needing the variables to be >> > evaluated in a specific order. >> > >> >> >> >> >> I was thinking of how we can handle complex cases >> in the current approach. >> >> >> >> (Case 1) >> >> Compiler flag -foo and -bar interacts, so >> we also need to check the combination of the two. >> >> >> config CC_HAS_FOO >> def_bool $(cc-option -foo) >> >> config CC_HAS_BAR >> def_bool $(cc-option -bar) >> >> config CC_HAS_FOO_WITH_BAR >> def_bool $(cc-option -foo -bar) >> >> >> >> (Case 2) >> Compiler flag -foo is sensitive to word-size. >> So, we need to test this option together with -m32/-m64. >> User can toggle CONFIG_64BIT, like i386/x86_64. >> >> >> config CC_NEEDS_M64 >> def_bool $(cc-option -m64) && 64BIT >> >> config CC_NEEDS_M32 >> def_bool $(cc-option -m32) && !64BIT >> >> config CC_HAS_FOO >> bool >> default $(cc-option -m64 -foo) if CC_NEEDS_M64 >> default $(cc-option -m32 -foo) if CC_NEEDS_M32 >> default $(cc-option -foo) >> >> >> >> (Case 3) >> Compiler flag -foo is sensitive to endian-ness. >> >> >> config CC_NEEDS_BIG_ENDIAN >> def_bool $(cc-option -mbig-endian) && CPU_BIG_ENDIAN >> >> config CC_NEEDS_LITTLE_ENDIAN >> def_bool $(cc-option -mlittle-endian) && CPU_LITTLE_ENDIAN >> >> config CC_HAS_FOO >> bool >> default $(cc-option -mbig-endian -foo) if CC_NEEDS_BIG_ENDIAN >> default $(cc-option -mlittle-endian -foo) if CC_NEEDS_LITTLE_ENDIAN >> default $(cc-option -foo) >> >> >> >> >> Hmm, I think I can implement those somehow. >> But, I hope we do not have many instances like this... >> >> >> If you know more naive cases, please share your knowledge. >> >> Thanks! >> >> >> -- >> Best Regards >> Masahiro Yamada > > Would get pretty bad if a test needs to consider multiple symbols. > Exponential explosion there... > > > I thought some more about the implementation of dynamic (post-parsing) > functions to see how bad it would get with the current implementation. > > Some background on how things work now: > > 1. All expression operands in Kconfig are symbols. > > 2. Returning '$ENV' or '$(fn foo)' as a T_WORD during parsing gets > you symbols with those strings as names and S_UNKNOWN type (because > they act like references to undefined symbols). > > 3. For "foo-$(fn foo)", you also get a symbol with that string as its > name and S_UNKNOWN type (stored among the SYMBOL_CONST symbols) > > 4. Symbols with S_UNKNOWN type get their name as their string value, > and the tristate value n. > > So, if you do string expansion on the names of symbols with S_UNKNOWN > type in sym_calc_value(), you're almost there with the current > implementation, except for the tristate case. > > Maybe you could set the tristate value of S_UNKNOWN symbols depending on > the string value you end up with. Things are getting pretty confusing at > that point. > > Could have something like S_DYNAMIC as well. More Kconfig complexity... > > Then there's other complications: > > 1. SYMBOL_CONST is no longer constant. > > 2. Dependency loop detection needs to consider symbol references > within strings. > > 3. Dependency loop detection relies on static knowledge of what > symbols a symbol depends on. That might get messy for certain > expansions, though it might be things you wouldn't do in practice. > > 4. Symbols still need to be properly invalidated. It looks like at > least menuconfig just does a dumb invalidate-everything whenever > the value of a symbol is changed though, so it might not require > extra work. (Bit messier in Kconfiglib, which does minimal > invalidation to keep scripts fast, but just need to extract a few > extra deps there.) > > > It looks like dynamic functions could get quite messy, but might be > doable if absolutely required. There's probably more devils in the > details though. > > I don't think the static function model precludes switching models later > btw, when people have more experience. I really want to start with the static function model and see if we need the dynamic function implementation. Here is an idea for the migration path in case we need to do that in the future. Currently, every time user input is given, sym_clear_all_valid() is called. It is not efficient to blindly re-evaluate expensive $(shell ...) So, have a list of symbols the function depends on in its arguments. For example, config CC_HAS_SANE_STACKPROTECTOR def_bool $(shell $srctree/scripts/gcc-has-stack-protector.sh $CC $(1), CFLAGS_BASE) Here the first argument $srctree/scripts/gcc-x86-has-stack-protector.sh $CC $(1) is the shell command. $(1), $(2), ... will be replaced with the values of symbols (or expressions) that follow when running the shell command. The second argument CFLAGS_BASE is the dependency symbol (or expression). CFLAGS_BASE can be dynamically changed like config CFLAGS_BASE string default "-m64" if 64BIT default "-m32" When and only when CFLAGS_BASE is updated, the function should be re-calculated. (This will require efforts to minimize the amount of re-evaluation.) cc-option will be implemented like follows: macro cc-option $(shell $CC -Werror $$(1) $(1) -c -x c /dev/null -o /dev/null, CFLAGS_BASE) Please notice the difference between $$(1) and $(1). $(1) is immediately expanded by cc-option macro. $$(1) is escaped since we want to expand it by $(shell ...), not by $(cc-option ...) For example, $(cc-option -fstack-protector) will be expanded to $(shell gcc -Werror $(1) -fstack-protector -c -x c /dev/null -o /dev/null, CFLAGS_BASE) Since macros are just textual shorthand, so this expansion happens during the parse phase. Then, the evaluation phase does the following every time CFLAGS_BASE is updated. gcc -Werror [value of CFLAGS_BASE] -fstack-protector -c -x c /dev/null -o /dev/null This is a new form of expression, so it will be managed in AST tree with a flag E_SHELL (or E_FUNC) etc. Not implemented at all. Just a rough sketch. -- Best Regards Masahiro Yamada
On Fri, Mar 02, 2018 at 02:50:39PM +0900, Masahiro Yamada wrote: > 2018-02-22 6:39 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: > > On Wed, Feb 21, 2018 at 09:57:03PM +0900, Masahiro Yamada wrote: > >> 2018-02-21 19:52 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: > >> > On Wed, Feb 21, 2018 at 11:20 AM, Masahiro Yamada > >> > <yamada.masahiro@socionext.com> wrote: > >> >> 2018-02-21 18:56 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: > >> >>> On Wed, Feb 21, 2018 at 8:38 AM, Masahiro Yamada > >> >>> <yamada.masahiro@socionext.com> wrote: > >> >>>> 2018-02-20 0:18 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: > >> >> > >> >> Let me clarify my concern. > >> >> > >> >> When we test the compiler flag, is there a case > >> >> where a particular flag depends on -m{32,64} ? > >> >> > >> >> For example, is there a compiler that supports -fstack-protector > >> >> for 64bit mode, but unsupports it for 32bit mode? > >> >> > >> >> $(cc-option -m32) -> y > >> >> $(cc-option -m64) -> y > >> >> $(cc-option -fstack-protector) -> y > >> >> $(cc-option -m32 -fstack-protector) -> n > >> >> $(cc-option -m64 -fstack-protector) -> y > >> >> > >> >> I guess this is unlikely to happen, > >> >> but I am not whether it is zero possibility. > >> >> > >> >> If this could happen, > >> >> $(cc-option ) must be evaluated together with > >> >> correct bi-arch option (either -m32 or -m64). > >> >> > >> >> > >> >> Currently, -m32/-m64 is specified in Makefile, > >> >> but we are moving compiler tests to Kconfig > >> >> and, CONFIG_64BIT can be dynamically toggled in Kconfig. > >> > > >> > I don't think it can happen for this particular combination (stack protector > >> > and word size), but I'm sure we'll eventually run into options that > >> > need to be tested in combination. For the current CFLAGS_KERNEL > >> > setting, we definitely have the case of needing the variables to be > >> > evaluated in a specific order. > >> > > >> > >> > >> > >> > >> I was thinking of how we can handle complex cases > >> in the current approach. > >> > >> > >> > >> (Case 1) > >> > >> Compiler flag -foo and -bar interacts, so > >> we also need to check the combination of the two. > >> > >> > >> config CC_HAS_FOO > >> def_bool $(cc-option -foo) > >> > >> config CC_HAS_BAR > >> def_bool $(cc-option -bar) > >> > >> config CC_HAS_FOO_WITH_BAR > >> def_bool $(cc-option -foo -bar) > >> > >> > >> > >> (Case 2) > >> Compiler flag -foo is sensitive to word-size. > >> So, we need to test this option together with -m32/-m64. > >> User can toggle CONFIG_64BIT, like i386/x86_64. > >> > >> > >> config CC_NEEDS_M64 > >> def_bool $(cc-option -m64) && 64BIT > >> > >> config CC_NEEDS_M32 > >> def_bool $(cc-option -m32) && !64BIT > >> > >> config CC_HAS_FOO > >> bool > >> default $(cc-option -m64 -foo) if CC_NEEDS_M64 > >> default $(cc-option -m32 -foo) if CC_NEEDS_M32 > >> default $(cc-option -foo) > >> > >> > >> > >> (Case 3) > >> Compiler flag -foo is sensitive to endian-ness. > >> > >> > >> config CC_NEEDS_BIG_ENDIAN > >> def_bool $(cc-option -mbig-endian) && CPU_BIG_ENDIAN > >> > >> config CC_NEEDS_LITTLE_ENDIAN > >> def_bool $(cc-option -mlittle-endian) && CPU_LITTLE_ENDIAN > >> > >> config CC_HAS_FOO > >> bool > >> default $(cc-option -mbig-endian -foo) if CC_NEEDS_BIG_ENDIAN > >> default $(cc-option -mlittle-endian -foo) if CC_NEEDS_LITTLE_ENDIAN > >> default $(cc-option -foo) > >> > >> > >> > >> > >> Hmm, I think I can implement those somehow. > >> But, I hope we do not have many instances like this... > >> > >> > >> If you know more naive cases, please share your knowledge. > >> > >> Thanks! > >> > >> > >> -- > >> Best Regards > >> Masahiro Yamada > > > > Would get pretty bad if a test needs to consider multiple symbols. > > Exponential explosion there... > > > > > > I thought some more about the implementation of dynamic (post-parsing) > > functions to see how bad it would get with the current implementation. > > > > Some background on how things work now: > > > > 1. All expression operands in Kconfig are symbols. > > > > 2. Returning '$ENV' or '$(fn foo)' as a T_WORD during parsing gets > > you symbols with those strings as names and S_UNKNOWN type (because > > they act like references to undefined symbols). > > > > 3. For "foo-$(fn foo)", you also get a symbol with that string as its > > name and S_UNKNOWN type (stored among the SYMBOL_CONST symbols) > > > > 4. Symbols with S_UNKNOWN type get their name as their string value, > > and the tristate value n. > > > > So, if you do string expansion on the names of symbols with S_UNKNOWN > > type in sym_calc_value(), you're almost there with the current > > implementation, except for the tristate case. > > > > Maybe you could set the tristate value of S_UNKNOWN symbols depending on > > the string value you end up with. Things are getting pretty confusing at > > that point. > > > > Could have something like S_DYNAMIC as well. More Kconfig complexity... > > > > Then there's other complications: > > > > 1. SYMBOL_CONST is no longer constant. > > > > 2. Dependency loop detection needs to consider symbol references > > within strings. > > > > 3. Dependency loop detection relies on static knowledge of what > > symbols a symbol depends on. That might get messy for certain > > expansions, though it might be things you wouldn't do in practice. > > > > 4. Symbols still need to be properly invalidated. It looks like at > > least menuconfig just does a dumb invalidate-everything whenever > > the value of a symbol is changed though, so it might not require > > extra work. (Bit messier in Kconfiglib, which does minimal > > invalidation to keep scripts fast, but just need to extract a few > > extra deps there.) > > > > > > It looks like dynamic functions could get quite messy, but might be > > doable if absolutely required. There's probably more devils in the > > details though. > > > > I don't think the static function model precludes switching models later > > btw, when people have more experience. > > > > I really want to start with the static function model > and see if we need the dynamic function implementation. Yeah, let's start with static functions, IMO. Either we'll learn that they're powerful enough in practice, and save ourselves some work, or we'll gain experience for later. Converting from static to dynamic functions should be painless, if needed. My plan would be something like: 1. Implement static functions 2. Convert as many simple cases over to them as possible 3. See how bad the bad cases get. If they get really bad, then decide what to do next (extend Kconfig, handle them in the Makefiles, etc.) > > Here is an idea for the migration path in case > we need to do that in the future. > > > > Currently, every time user input is given, > sym_clear_all_valid() is called. > > It is not efficient to blindly re-evaluate expensive $(shell ...) I think menuconfig only reevalutes the symbols in the menu that's currently shown in the interface (along with their dependencies). Maybe that'd be bad enough though. > > > So, have a list of symbols the function depends on > in its arguments. > > For example, > > config CC_HAS_SANE_STACKPROTECTOR > def_bool $(shell $srctree/scripts/gcc-has-stack-protector.sh > $CC $(1), CFLAGS_BASE) > > > Here the first argument > $srctree/scripts/gcc-x86-has-stack-protector.sh $CC $(1) > > is the shell command. > $(1), $(2), ... will be replaced with the values of symbols (or expressions) > that follow when running the shell command. > > > The second argument > CFLAGS_BASE > is the dependency symbol (or expression). > > > CFLAGS_BASE can be dynamically changed like > > config CFLAGS_BASE > string > default "-m64" if 64BIT > default "-m32" > > > When and only when CFLAGS_BASE is updated, the function should be re-calculated. > (This will require efforts to minimize the amount of re-evaluation.) > > > > > cc-option will be implemented like follows: > > macro cc-option $(shell $CC -Werror $$(1) $(1) -c -x c /dev/null -o > /dev/null, CFLAGS_BASE) > > > > Please notice the difference between $$(1) and $(1). > > $(1) is immediately expanded by cc-option macro. > > $$(1) is escaped since we want to expand it by $(shell ...), not by > $(cc-option ...) > > > > For example, > > $(cc-option -fstack-protector) > > will be expanded to > > $(shell gcc -Werror $(1) -fstack-protector -c -x c /dev/null -o > /dev/null, CFLAGS_BASE) > > Since macros are just textual shorthand, so this expansion happens > during the parse phase. > > > > Then, the evaluation phase does the following every time CFLAGS_BASE is updated. > > gcc -Werror [value of CFLAGS_BASE] -fstack-protector -c -x c /dev/null > -o /dev/null > > > This is a new form of expression, so it will be managed in AST tree > with a flag E_SHELL (or E_FUNC) etc. > > > Not implemented at all. Just a rough sketch. A simpler syntax like $(shell $CC -Werror {CFLAGS_BASE} -c -x c /dev/null -o /dev/null) might work as well. Then you wouldn't have to any double escaping, and having both $(1) and the value for it appear in the same place seems a bit redundant. I wonder if dependency management might get messy... Anyway, let's just go with static functions... Cheers, Ulf
On Fri, Mar 02, 2018 at 10:03:26AM +0100, Ulf Magnusson wrote: > On Fri, Mar 02, 2018 at 02:50:39PM +0900, Masahiro Yamada wrote: > > 2018-02-22 6:39 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: > > > On Wed, Feb 21, 2018 at 09:57:03PM +0900, Masahiro Yamada wrote: > > >> 2018-02-21 19:52 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: > > >> > On Wed, Feb 21, 2018 at 11:20 AM, Masahiro Yamada > > >> > <yamada.masahiro@socionext.com> wrote: > > >> >> 2018-02-21 18:56 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: > > >> >>> On Wed, Feb 21, 2018 at 8:38 AM, Masahiro Yamada > > >> >>> <yamada.masahiro@socionext.com> wrote: > > >> >>>> 2018-02-20 0:18 GMT+09:00 Ulf Magnusson <ulfalizer@gmail.com>: > > >> >> > > >> >> Let me clarify my concern. > > >> >> > > >> >> When we test the compiler flag, is there a case > > >> >> where a particular flag depends on -m{32,64} ? > > >> >> > > >> >> For example, is there a compiler that supports -fstack-protector > > >> >> for 64bit mode, but unsupports it for 32bit mode? > > >> >> > > >> >> $(cc-option -m32) -> y > > >> >> $(cc-option -m64) -> y > > >> >> $(cc-option -fstack-protector) -> y > > >> >> $(cc-option -m32 -fstack-protector) -> n > > >> >> $(cc-option -m64 -fstack-protector) -> y > > >> >> > > >> >> I guess this is unlikely to happen, > > >> >> but I am not whether it is zero possibility. > > >> >> > > >> >> If this could happen, > > >> >> $(cc-option ) must be evaluated together with > > >> >> correct bi-arch option (either -m32 or -m64). > > >> >> > > >> >> > > >> >> Currently, -m32/-m64 is specified in Makefile, > > >> >> but we are moving compiler tests to Kconfig > > >> >> and, CONFIG_64BIT can be dynamically toggled in Kconfig. > > >> > > > >> > I don't think it can happen for this particular combination (stack protector > > >> > and word size), but I'm sure we'll eventually run into options that > > >> > need to be tested in combination. For the current CFLAGS_KERNEL > > >> > setting, we definitely have the case of needing the variables to be > > >> > evaluated in a specific order. > > >> > > > >> > > >> > > >> > > >> > > >> I was thinking of how we can handle complex cases > > >> in the current approach. > > >> > > >> > > >> > > >> (Case 1) > > >> > > >> Compiler flag -foo and -bar interacts, so > > >> we also need to check the combination of the two. > > >> > > >> > > >> config CC_HAS_FOO > > >> def_bool $(cc-option -foo) > > >> > > >> config CC_HAS_BAR > > >> def_bool $(cc-option -bar) > > >> > > >> config CC_HAS_FOO_WITH_BAR > > >> def_bool $(cc-option -foo -bar) > > >> > > >> > > >> > > >> (Case 2) > > >> Compiler flag -foo is sensitive to word-size. > > >> So, we need to test this option together with -m32/-m64. > > >> User can toggle CONFIG_64BIT, like i386/x86_64. > > >> > > >> > > >> config CC_NEEDS_M64 > > >> def_bool $(cc-option -m64) && 64BIT > > >> > > >> config CC_NEEDS_M32 > > >> def_bool $(cc-option -m32) && !64BIT > > >> > > >> config CC_HAS_FOO > > >> bool > > >> default $(cc-option -m64 -foo) if CC_NEEDS_M64 > > >> default $(cc-option -m32 -foo) if CC_NEEDS_M32 > > >> default $(cc-option -foo) > > >> > > >> > > >> > > >> (Case 3) > > >> Compiler flag -foo is sensitive to endian-ness. > > >> > > >> > > >> config CC_NEEDS_BIG_ENDIAN > > >> def_bool $(cc-option -mbig-endian) && CPU_BIG_ENDIAN > > >> > > >> config CC_NEEDS_LITTLE_ENDIAN > > >> def_bool $(cc-option -mlittle-endian) && CPU_LITTLE_ENDIAN > > >> > > >> config CC_HAS_FOO > > >> bool > > >> default $(cc-option -mbig-endian -foo) if CC_NEEDS_BIG_ENDIAN > > >> default $(cc-option -mlittle-endian -foo) if CC_NEEDS_LITTLE_ENDIAN > > >> default $(cc-option -foo) > > >> > > >> > > >> > > >> > > >> Hmm, I think I can implement those somehow. > > >> But, I hope we do not have many instances like this... > > >> > > >> > > >> If you know more naive cases, please share your knowledge. > > >> > > >> Thanks! > > >> > > >> > > >> -- > > >> Best Regards > > >> Masahiro Yamada > > > > > > Would get pretty bad if a test needs to consider multiple symbols. > > > Exponential explosion there... > > > > > > > > > I thought some more about the implementation of dynamic (post-parsing) > > > functions to see how bad it would get with the current implementation. > > > > > > Some background on how things work now: > > > > > > 1. All expression operands in Kconfig are symbols. > > > > > > 2. Returning '$ENV' or '$(fn foo)' as a T_WORD during parsing gets > > > you symbols with those strings as names and S_UNKNOWN type (because > > > they act like references to undefined symbols). > > > > > > 3. For "foo-$(fn foo)", you also get a symbol with that string as its > > > name and S_UNKNOWN type (stored among the SYMBOL_CONST symbols) > > > > > > 4. Symbols with S_UNKNOWN type get their name as their string value, > > > and the tristate value n. > > > > > > So, if you do string expansion on the names of symbols with S_UNKNOWN > > > type in sym_calc_value(), you're almost there with the current > > > implementation, except for the tristate case. > > > > > > Maybe you could set the tristate value of S_UNKNOWN symbols depending on > > > the string value you end up with. Things are getting pretty confusing at > > > that point. > > > > > > Could have something like S_DYNAMIC as well. More Kconfig complexity... > > > > > > Then there's other complications: > > > > > > 1. SYMBOL_CONST is no longer constant. > > > > > > 2. Dependency loop detection needs to consider symbol references > > > within strings. > > > > > > 3. Dependency loop detection relies on static knowledge of what > > > symbols a symbol depends on. That might get messy for certain > > > expansions, though it might be things you wouldn't do in practice. > > > > > > 4. Symbols still need to be properly invalidated. It looks like at > > > least menuconfig just does a dumb invalidate-everything whenever > > > the value of a symbol is changed though, so it might not require > > > extra work. (Bit messier in Kconfiglib, which does minimal > > > invalidation to keep scripts fast, but just need to extract a few > > > extra deps there.) > > > > > > > > > It looks like dynamic functions could get quite messy, but might be > > > doable if absolutely required. There's probably more devils in the > > > details though. > > > > > > I don't think the static function model precludes switching models later > > > btw, when people have more experience. > > > > > > > > I really want to start with the static function model > > and see if we need the dynamic function implementation. > > Yeah, let's start with static functions, IMO. > > Either we'll learn that they're powerful enough in practice, and save > ourselves some work, or we'll gain experience for later. Converting from > static to dynamic functions should be painless, if needed. > > My plan would be something like: > > 1. Implement static functions > > 2. Convert as many simple cases over to them as possible > > 3. See how bad the bad cases get. If they get really bad, then decide > what to do next (extend Kconfig, handle them in the Makefiles, > etc.) > > > > > Here is an idea for the migration path in case > > we need to do that in the future. > > > > > > > > Currently, every time user input is given, > > sym_clear_all_valid() is called. > > > > It is not efficient to blindly re-evaluate expensive $(shell ...) > > I think menuconfig only reevalutes the symbols in the menu that's > currently shown in the interface (along with their dependencies). > > Maybe that'd be bad enough though. > > > > > > > So, have a list of symbols the function depends on > > in its arguments. > > > > For example, > > > > config CC_HAS_SANE_STACKPROTECTOR > > def_bool $(shell $srctree/scripts/gcc-has-stack-protector.sh > > $CC $(1), CFLAGS_BASE) > > > > > > Here the first argument > > $srctree/scripts/gcc-x86-has-stack-protector.sh $CC $(1) > > > > is the shell command. > > $(1), $(2), ... will be replaced with the values of symbols (or expressions) > > that follow when running the shell command. > > > > > > The second argument > > CFLAGS_BASE > > is the dependency symbol (or expression). > > > > > > CFLAGS_BASE can be dynamically changed like > > > > config CFLAGS_BASE > > string > > default "-m64" if 64BIT > > default "-m32" > > > > > > When and only when CFLAGS_BASE is updated, the function should be re-calculated. > > (This will require efforts to minimize the amount of re-evaluation.) > > > > > > > > > > cc-option will be implemented like follows: > > > > macro cc-option $(shell $CC -Werror $$(1) $(1) -c -x c /dev/null -o > > /dev/null, CFLAGS_BASE) > > > > > > > > Please notice the difference between $$(1) and $(1). > > > > $(1) is immediately expanded by cc-option macro. > > > > $$(1) is escaped since we want to expand it by $(shell ...), not by > > $(cc-option ...) > > > > > > > > For example, > > > > $(cc-option -fstack-protector) > > > > will be expanded to > > > > $(shell gcc -Werror $(1) -fstack-protector -c -x c /dev/null -o > > /dev/null, CFLAGS_BASE) > > > > Since macros are just textual shorthand, so this expansion happens > > during the parse phase. > > > > > > > > Then, the evaluation phase does the following every time CFLAGS_BASE is updated. > > > > gcc -Werror [value of CFLAGS_BASE] -fstack-protector -c -x c /dev/null > > -o /dev/null > > > > > > This is a new form of expression, so it will be managed in AST tree > > with a flag E_SHELL (or E_FUNC) etc. > > > > > > Not implemented at all. Just a rough sketch. > > A simpler syntax like > > $(shell $CC -Werror {CFLAGS_BASE} -c -x c /dev/null -o /dev/null) *$(shell $CC -Werror {CFLAGS_BASE} -fstack-protector -c -x c /dev/null -o /dev/null)