diff mbox series

[v2,2/2] PCI: histb: add an optional regulator for PCIe port power control

Message ID 1516722337-1533-3-git-send-email-shawn.guo@linaro.org
State New
Headers show
Series Add power control for pcie-histb driver | expand

Commit Message

Shawn Guo Jan. 23, 2018, 3:45 p.m. UTC
The power supply to PCIe port are often controlled by GPIO on some board
designs.  Let's add an optional regulator which can be backed by GPIO to
control the power.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

---
 .../bindings/pci/hisilicon-histb-pcie.txt           |  1 +
 drivers/pci/dwc/pcie-histb.c                        | 21 +++++++++++++++++++++
 2 files changed, 22 insertions(+)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Rob Herring (Arm) Jan. 30, 2018, 12:07 a.m. UTC | #1
On Tue, Jan 23, 2018 at 11:45:37PM +0800, Shawn Guo wrote:
> The power supply to PCIe port are often controlled by GPIO on some board

> designs.  Let's add an optional regulator which can be backed by GPIO to

> control the power.

> 

> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

> ---

>  .../bindings/pci/hisilicon-histb-pcie.txt           |  1 +


Acked-by: Rob Herring <robh@kernel.org>


>  drivers/pci/dwc/pcie-histb.c                        | 21 +++++++++++++++++++++

>  2 files changed, 22 insertions(+)

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bjorn Helgaas March 1, 2018, 3:09 p.m. UTC | #2
On Tue, Jan 23, 2018 at 11:45:37PM +0800, Shawn Guo wrote:
> The power supply to PCIe port are often controlled by GPIO on some board

> designs.  Let's add an optional regulator which can be backed by GPIO to

> control the power.

> 

> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

> ---

>  .../bindings/pci/hisilicon-histb-pcie.txt           |  1 +

>  drivers/pci/dwc/pcie-histb.c                        | 21 +++++++++++++++++++++

>  2 files changed, 22 insertions(+)

> 

> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt

> index c84bc027930b..f995664e6d7f 100644

> --- a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt

> +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt

> @@ -34,6 +34,7 @@ Required properties

>  

>  Optional properties:

>  - reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal.

> +- vpcie-supply: Should specify the regulator in charge of PCIe port power.


s/Should specify the/The/

>  - phys: List of phandle and phy mode specifier, should be 0.

>  - phy-names: Must be "phy".

>  

> diff --git a/drivers/pci/dwc/pcie-histb.c b/drivers/pci/dwc/pcie-histb.c

> index 6395394be5b4..8eb3028432b3 100644

> --- a/drivers/pci/dwc/pcie-histb.c

> +++ b/drivers/pci/dwc/pcie-histb.c

> @@ -64,6 +64,7 @@ struct histb_pcie {

>  	struct reset_control *bus_reset;

>  	void __iomem *ctrl;

>  	int reset_gpio;

> +	struct regulator *vpcie;

>  };

>  

>  static u32 histb_pcie_readl(struct histb_pcie *histb_pcie, u32 reg)

> @@ -230,6 +231,9 @@ static void histb_pcie_host_disable(struct histb_pcie *hipcie)

>  

>  	if (gpio_is_valid(hipcie->reset_gpio))

>  		gpio_set_value_cansleep(hipcie->reset_gpio, 0);

> +

> +	if (hipcie->vpcie)

> +		regulator_disable(hipcie->vpcie);

>  }

>  

>  static int histb_pcie_host_enable(struct pcie_port *pp)

> @@ -240,6 +244,14 @@ static int histb_pcie_host_enable(struct pcie_port *pp)

>  	int ret;

>  

>  	/* power on PCIe device if have */

> +	if (hipcie->vpcie) {

> +		ret = regulator_enable(hipcie->vpcie);

> +		if (ret) {

> +			dev_err(dev, "failed to enable regulator: %d\n", ret);

> +			return ret;

> +		}

> +	}

> +

>  	if (gpio_is_valid(hipcie->reset_gpio))

>  		gpio_set_value_cansleep(hipcie->reset_gpio, 1);

>  

> @@ -285,6 +297,8 @@ static int histb_pcie_host_enable(struct pcie_port *pp)

>  err_sys_clk:

>  	clk_disable_unprepare(hipcie->bus_clk);

>  err_bus_clk:

> +	if (hipcie->vpcie)

> +		regulator_disable(hipcie->vpcie);

>  

>  	return ret;

>  }

> @@ -334,6 +348,13 @@ static int histb_pcie_probe(struct platform_device *pdev)

>  		return PTR_ERR(pci->dbi_base);

>  	}

>  

> +	hipcie->vpcie = devm_regulator_get_optional(dev, "vpcie");

> +	if (IS_ERR(hipcie->vpcie)) {

> +		if (PTR_ERR(hipcie->vpcie) == -EPROBE_DEFER)

> +			return -EPROBE_DEFER;

> +		hipcie->vpcie = NULL;

> +	}

> +

>  	hipcie->reset_gpio = of_get_named_gpio_flags(np,

>  				"reset-gpios", 0, &of_flags);

>  	if (of_flags & OF_GPIO_ACTIVE_LOW)

> -- 

> 1.9.1

> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
index c84bc027930b..f995664e6d7f 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
@@ -34,6 +34,7 @@  Required properties
 
 Optional properties:
 - reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal.
+- vpcie-supply: Should specify the regulator in charge of PCIe port power.
 - phys: List of phandle and phy mode specifier, should be 0.
 - phy-names: Must be "phy".
 
diff --git a/drivers/pci/dwc/pcie-histb.c b/drivers/pci/dwc/pcie-histb.c
index 6395394be5b4..8eb3028432b3 100644
--- a/drivers/pci/dwc/pcie-histb.c
+++ b/drivers/pci/dwc/pcie-histb.c
@@ -64,6 +64,7 @@  struct histb_pcie {
 	struct reset_control *bus_reset;
 	void __iomem *ctrl;
 	int reset_gpio;
+	struct regulator *vpcie;
 };
 
 static u32 histb_pcie_readl(struct histb_pcie *histb_pcie, u32 reg)
@@ -230,6 +231,9 @@  static void histb_pcie_host_disable(struct histb_pcie *hipcie)
 
 	if (gpio_is_valid(hipcie->reset_gpio))
 		gpio_set_value_cansleep(hipcie->reset_gpio, 0);
+
+	if (hipcie->vpcie)
+		regulator_disable(hipcie->vpcie);
 }
 
 static int histb_pcie_host_enable(struct pcie_port *pp)
@@ -240,6 +244,14 @@  static int histb_pcie_host_enable(struct pcie_port *pp)
 	int ret;
 
 	/* power on PCIe device if have */
+	if (hipcie->vpcie) {
+		ret = regulator_enable(hipcie->vpcie);
+		if (ret) {
+			dev_err(dev, "failed to enable regulator: %d\n", ret);
+			return ret;
+		}
+	}
+
 	if (gpio_is_valid(hipcie->reset_gpio))
 		gpio_set_value_cansleep(hipcie->reset_gpio, 1);
 
@@ -285,6 +297,8 @@  static int histb_pcie_host_enable(struct pcie_port *pp)
 err_sys_clk:
 	clk_disable_unprepare(hipcie->bus_clk);
 err_bus_clk:
+	if (hipcie->vpcie)
+		regulator_disable(hipcie->vpcie);
 
 	return ret;
 }
@@ -334,6 +348,13 @@  static int histb_pcie_probe(struct platform_device *pdev)
 		return PTR_ERR(pci->dbi_base);
 	}
 
+	hipcie->vpcie = devm_regulator_get_optional(dev, "vpcie");
+	if (IS_ERR(hipcie->vpcie)) {
+		if (PTR_ERR(hipcie->vpcie) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		hipcie->vpcie = NULL;
+	}
+
 	hipcie->reset_gpio = of_get_named_gpio_flags(np,
 				"reset-gpios", 0, &of_flags);
 	if (of_flags & OF_GPIO_ACTIVE_LOW)