@@ -502,8 +502,20 @@ static int sdhci_pre_dma_transfer(struct sdhci_host *host,
if (data->host_cookie == COOKIE_PRE_MAPPED)
return data->sg_count;
- sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
- mmc_get_dma_dir(data));
+ /* Bounce write requests to the bounce buffer */
+ if (host->bounce_buffer) {
+ if (mmc_get_dma_dir(data) == DMA_TO_DEVICE) {
+ /* Copy the data to the bounce buffer */
+ sg_copy_to_buffer(data->sg, data->sg_len,
+ host->bounce_buffer, host->bounce_buffer_size);
+ }
+ /* Just a dummy value */
+ sg_count = 1;
+ } else {
+ /* Just access the data directly from memory */
+ sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
+ }
if (sg_count == 0)
return -ENOSPC;
@@ -858,8 +870,13 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
SDHCI_ADMA_ADDRESS_HI);
} else {
WARN_ON(sg_cnt != 1);
- sdhci_writel(host, sg_dma_address(data->sg),
- SDHCI_DMA_ADDRESS);
+ /* Bounce buffer goes to work */
+ if (host->bounce_buffer)
+ sdhci_writel(host, host->bounce_addr,
+ SDHCI_DMA_ADDRESS);
+ else
+ sdhci_writel(host, sg_dma_address(data->sg),
+ SDHCI_DMA_ADDRESS);
}
}
@@ -2248,7 +2265,12 @@ static void sdhci_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
mrq->data->host_cookie = COOKIE_UNMAPPED;
- if (host->flags & SDHCI_REQ_USE_DMA)
+ /*
+ * No pre-mapping in the pre hook if we're using the bounce buffer,
+ * for that we would need two bounce buffers since one buffer is
+ * in flight when this is getting called.
+ */
+ if (host->flags & SDHCI_REQ_USE_DMA && !host->bounce_buffer)
sdhci_pre_dma_transfer(host, mrq->data, COOKIE_PRE_MAPPED);
}
@@ -2352,8 +2374,19 @@ static bool sdhci_request_done(struct sdhci_host *host)
struct mmc_data *data = mrq->data;
if (data && data->host_cookie == COOKIE_MAPPED) {
- dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
- mmc_get_dma_dir(data));
+ if (host->bounce_buffer) {
+ /* On reads, copy the bounced data into the sglist */
+ if (mmc_get_dma_dir(data) == DMA_FROM_DEVICE) {
+ sg_copy_from_buffer(data->sg, data->sg_len,
+ host->bounce_buffer,
+ host->bounce_buffer_size);
+ }
+ } else {
+ /* Unmap the raw data */
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len,
+ mmc_get_dma_dir(data));
+ }
data->host_cookie = COOKIE_UNMAPPED;
}
}
@@ -2636,7 +2669,12 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
*/
if (intmask & SDHCI_INT_DMA_END) {
u32 dmastart, dmanow;
- dmastart = sg_dma_address(host->data->sg);
+
+ if (host->bounce_buffer)
+ dmastart = host->bounce_addr;
+ else
+ dmastart = sg_dma_address(host->data->sg);
+
dmanow = dmastart + host->data->bytes_xfered;
/*
* Force update to the next DMA block boundary.
@@ -3713,6 +3751,43 @@ int sdhci_setup_host(struct sdhci_host *host)
*/
mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
+ if (mmc->max_segs == 1) {
+ unsigned int max_blocks;
+ unsigned int max_seg_size;
+
+ max_seg_size = mmc->max_req_size;
+ max_blocks = max_seg_size / 512;
+ dev_info(mmc->parent, "host only supports SDMA, activate bounce buffer\n");
+
+ /*
+ * When we just support one segment, we can get significant speedups
+ * by the help of a bounce buffer to group scattered reads/writes
+ * together.
+ *
+ * TODO: is this too big? Stealing too much memory? The old bounce
+ * buffer is max 64K. This should be the 512K that SDMA can handle
+ * if I read the code above right. Anyways let's try this.
+ * FIXME: use devm_*
+ */
+ host->bounce_buffer = dma_alloc_coherent(mmc->parent, max_seg_size,
+ &host->bounce_addr, GFP_KERNEL);
+ if (!host->bounce_buffer) {
+ dev_err(mmc->parent,
+ "failed to allocate %u bytes for bounce buffer\n",
+ max_seg_size);
+ return -ENOMEM;
+ }
+ host->bounce_buffer_size = max_seg_size;
+
+ /* Lie about this since we're bouncing */
+ mmc->max_segs = max_blocks;
+ mmc->max_seg_size = max_seg_size;
+
+ dev_info(mmc->parent,
+ "bounce buffer: bounce up to %u segments into one, max segment size %u bytes\n",
+ max_blocks, max_seg_size);
+ }
+
return 0;
unreg:
@@ -3743,6 +3818,9 @@ void sdhci_cleanup_host(struct sdhci_host *host)
host->align_addr);
host->adma_table = NULL;
host->align_buffer = NULL;
+ if (host->bounce_buffer)
+ dma_free_coherent(mmc->parent, host->bounce_buffer_size,
+ host->bounce_buffer, host->bounce_addr);
}
EXPORT_SYMBOL_GPL(sdhci_cleanup_host);
@@ -440,6 +440,9 @@ struct sdhci_host {
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
+ char *bounce_buffer; /* For packing SDMA reads/writes */
+ dma_addr_t bounce_addr;
+ size_t bounce_buffer_size;
const struct sdhci_ops *ops; /* Low level hw interface */
The bounce buffer is gone from the MMC core, and now we found out that there are some (crippled) i.MX boards out there that have broken ADMA (cannot do scatter-gather), and broken PIO so they must use SDMA. SDMA sets down the number of segments to one, so that each segment gets turned into a singular request that ping-pongs to the block layer before the next request/segment is issued. These devices can see major benefits from a bounce buffer, as a fragmented read or write buffer may come in even though the sectors we will be reading or writing to the MMC/SD-card are consecutive. This patch accumulates those fragmented scatterlists in a physically contigous bounce buffer so that we can issue bigger DMA data chunks to/from the card. When tested with thise PCI-integrated host (1217:8221) that only supports SDMA: 0b:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05) This patch gave ~1Mbyte/s improved throughput on large reads and writes when testing using iozone than without the patch. It is possible to achieve even better speed-ups by adding a second bounce buffer so that the ->pre_req() hook in the driver can do the buffer copying and DMA mapping/flushing while the request is in flight. We save this optimization for later. Cc: Benjamin Beckmeyer <beckmeyer.b@rittal.de> Cc: Pierre Ossman <pierre@ossman.eu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Skip the remapping and fiddling with the buffer, instead use dma_alloc_coherent() and use a simple, coherent bounce buffer. - Couple kernel messages to ->parent of the mmc_host as it relates to the hardware characteristics. --- drivers/mmc/host/sdhci.c | 94 +++++++++++++++++++++++++++++++++++++++++++----- drivers/mmc/host/sdhci.h | 3 ++ 2 files changed, 89 insertions(+), 8 deletions(-) -- 2.14.3 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html