diff mbox series

[v9,4/6] clocksource: stm32: add clocksource support

Message ID 20171208113250.359-5-benjamin.gaignard@st.com
State New
Headers show
Series [v9,1/6] clocksource: stm32: convert driver to timer_of | expand

Commit Message

Benjamin Gaignard Dec. 8, 2017, 11:32 a.m. UTC 
The stm32 timer hardware is currently only used as a clock event device,
but it can be utilized as a clocksource as well.

Implement this by enabling the free running counter in the hardware block
and converting the clock event part from a count down event timer to a
comparator based timer.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

---
 drivers/clocksource/timer-stm32.c | 116 +++++++++++++++++++++++++++++---------
 1 file changed, 88 insertions(+), 28 deletions(-)

-- 
2.15.0

Comments

Daniel Lezcano Dec. 8, 2017, 1:46 p.m. UTC | #1 
On 08/12/2017 12:32, Benjamin Gaignard wrote:
> The stm32 timer hardware is currently only used as a clock event device,

> but it can be utilized as a clocksource as well.

> 

> Implement this by enabling the free running counter in the hardware block

> and converting the clock event part from a count down event timer to a

> comparator based timer.



Split this patch in two:
 - periodic support
 - clocksource support




-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Benjamin Gaignard Dec. 8, 2017, 2:04 p.m. UTC | #2 
2017-12-08 14:46 GMT+01:00 Daniel Lezcano <daniel.lezcano@linaro.org>:
> On 08/12/2017 12:32, Benjamin Gaignard wrote:

>> The stm32 timer hardware is currently only used as a clock event device,

>> but it can be utilized as a clocksource as well.

>>

>> Implement this by enabling the free running counter in the hardware block

>> and converting the clock event part from a count down event timer to a

>> comparator based timer.

>

>

> Split this patch in two:

>  - periodic support

>  - clocksource support


No because the way of implementing periodic support depend of how clocksource
part is implemented on the hardware.
I don't want to code functions that I will completely remove just after

>

>

>

>

> --

>  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

>

> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |

> <http://twitter.com/#!/linaroorg> Twitter |

> <http://www.linaro.org/linaro-blog/> Blog

>
diff mbox series

Patch

diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
index 707808d91bf0..c9aed2314194 100644
--- a/drivers/clocksource/timer-stm32.c
+++ b/drivers/clocksource/timer-stm32.c
@@ -16,6 +16,8 @@ 
 #include <linux/of_irq.h>
 #include <linux/clk.h>
 #include <linux/reset.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
 
 #include "timer-of.h"
 
@@ -23,16 +25,16 @@ 
 #define TIM_DIER	0x0c
 #define TIM_SR		0x10
 #define TIM_EGR		0x14
+#define TIM_CNT		0x24
 #define TIM_PSC		0x28
 #define TIM_ARR		0x2c
+#define TIM_CCR1	0x34
 
 #define TIM_CR1_CEN	BIT(0)
-#define TIM_CR1_OPM	BIT(3)
+#define TIM_CR1_UDIS	BIT(1)
 #define TIM_CR1_ARPE	BIT(7)
 
-#define TIM_DIER_UIE	BIT(0)
-
-#define TIM_SR_UIF	BIT(0)
+#define TIM_DIER_CC1IE	BIT(1)
 
 #define TIM_EGR_UG	BIT(0)
 
@@ -46,28 +48,44 @@  static int stm32_clock_event_shutdown(struct clock_event_device *evt)
 {
 	struct timer_of *to = to_timer_of(evt);
 
-	writel_relaxed(0, timer_of_base(to) + TIM_CR1);
+	writel_relaxed(0, timer_of_base(to) + TIM_DIER);
+
 	return 0;
 }
 
-static int stm32_clock_event_set_periodic(struct clock_event_device *evt)
+static int stm32_clock_event_set_next_event(unsigned long evt,
+					    struct clock_event_device *clkevt)
 {
-	struct timer_of *to = to_timer_of(evt);
+	struct timer_of *to = to_timer_of(clkevt);
+	unsigned long now, next;
 
-	writel_relaxed(timer_of_period(to), timer_of_base(to) + TIM_ARR);
-	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, timer_of_base(to) + TIM_CR1);
+	next = readl_relaxed(timer_of_base(to) + TIM_CNT) + evt;
+	writel_relaxed(next, timer_of_base(to) + TIM_CCR1);
+	now = readl_relaxed(timer_of_base(to) + TIM_CNT);
+
+	if ((next - now) > evt)
+		return -ETIME;
+
+	writel_relaxed(TIM_DIER_CC1IE, timer_of_base(to) + TIM_DIER);
 
 	return 0;
 }
 
-static int stm32_clock_event_set_next_event(unsigned long evt,
-					    struct clock_event_device *clkevt)
+static int stm32_clock_event_set_periodic(struct clock_event_device *evt)
 {
-	struct timer_of *to = to_timer_of(clkevt);
+	struct timer_of *to = to_timer_of(evt);
 
-	writel_relaxed(evt, timer_of_base(to) + TIM_ARR);
-	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_OPM | TIM_CR1_CEN,
-		       timer_of_base(to) + TIM_CR1);
+	return stm32_clock_event_set_next_event(timer_of_period(to), evt);
+}
+
+static int stm32_clock_event_set_oneshot(struct clock_event_device *evt)
+{
+	struct timer_of *to = to_timer_of(evt);
+	unsigned long val;
+
+	val = readl_relaxed(timer_of_base(to) + TIM_CNT);
+	writel_relaxed(val, timer_of_base(to) + TIM_CCR1);
+	writel_relaxed(TIM_DIER_CC1IE, timer_of_base(to) + TIM_DIER);
 
 	return 0;
 }
@@ -79,6 +97,11 @@  static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
 
 	writel_relaxed(0, timer_of_base(to) + TIM_SR);
 
+	if (clockevent_state_periodic(evt))
+		stm32_clock_event_set_periodic(evt);
+	else
+		stm32_clock_event_shutdown(evt);
+
 	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
@@ -89,7 +112,48 @@  static bool stm32_timer_is_32bits(struct timer_of *to)
 	return readl_relaxed(timer_of_base(to) + TIM_ARR) == ~0UL;
 }
 
-static int __init stm32_clockevent_init(struct device_node *node)
+static void __init stm32_clockevent_init(struct timer_of *to)
+{
+	writel_relaxed(0, timer_of_base(to) + TIM_DIER);
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
+
+	clockevents_config_and_register(&to->clkevt,
+					timer_of_rate(to), MIN_DELTA, ~0U);
+}
+
+static void __iomem *stm32_timer_cnt __read_mostly;
+
+static u64 notrace stm32_read_sched_clock(void)
+{
+	return readl_relaxed(stm32_timer_cnt);
+}
+
+static int __init stm32_clocksource_init(struct timer_of *to)
+{
+	writel_relaxed(~0U, timer_of_base(to) + TIM_ARR);
+	writel_relaxed(0, timer_of_base(to) + TIM_PSC);
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
+	writel_relaxed(0, timer_of_base(to) + TIM_DIER);
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
+	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_UDIS,
+		       timer_of_base(to) + TIM_CR1);
+
+	/* Make sure that registers are updated */
+	writel_relaxed(TIM_EGR_UG, timer_of_base(to) + TIM_EGR);
+
+	/* Enable controller */
+	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_UDIS | TIM_CR1_CEN,
+		       timer_of_base(to) + TIM_CR1);
+
+	stm32_timer_cnt = timer_of_base(to) + TIM_CNT;
+	sched_clock_register(stm32_read_sched_clock, 32, timer_of_rate(to));
+
+	return clocksource_mmio_init(stm32_timer_cnt, "stm32_timer",
+				     timer_of_rate(to), 250, 32,
+				     clocksource_mmio_readl_up);
+}
+
+static int __init stm32_timer_init(struct device_node *node)
 {
 	struct reset_control *rstc;
 	struct timer_of *to;
@@ -100,12 +164,13 @@  static int __init stm32_clockevent_init(struct device_node *node)
 		return -ENOMEM;
 
 	to->flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE;
+
 	to->clkevt.name = "stm32_clockevent";
 	to->clkevt.rating = 200;
-	to->clkevt.features = CLOCK_EVT_FEAT_PERIODIC;
+	to->clkevt.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC;
 	to->clkevt.set_state_shutdown = stm32_clock_event_shutdown;
 	to->clkevt.set_state_periodic = stm32_clock_event_set_periodic;
-	to->clkevt.set_state_oneshot = stm32_clock_event_shutdown;
+	to->clkevt.set_state_oneshot = stm32_clock_event_set_oneshot;
 	to->clkevt.tick_resume = stm32_clock_event_shutdown;
 	to->clkevt.set_next_event = stm32_clock_event_set_next_event;
 
@@ -128,16 +193,11 @@  static int __init stm32_clockevent_init(struct device_node *node)
 		goto deinit;
 	}
 
-	writel_relaxed(0, timer_of_base(to) + TIM_ARR);
-
-	writel_relaxed(0, timer_of_base(to) + TIM_PSC);
-	writel_relaxed(TIM_EGR_UG, timer_of_base(to) + TIM_EGR);
-	writel_relaxed(TIM_DIER_UIE, timer_of_base(to) + TIM_DIER);
-	writel_relaxed(0, timer_of_base(to) + TIM_SR);
+	ret = stm32_clocksource_init(to);
+	if (ret)
+		goto deinit;
 
-	clockevents_config_and_register(&to->clkevt,
-					timer_of_period(to),
-					MIN_DELTA, ~0U);
+	stm32_clockevent_init(to);
 
 	return 0;
 
@@ -148,4 +208,4 @@  static int __init stm32_clockevent_init(struct device_node *node)
 	return ret;
 }
 
-TIMER_OF_DECLARE(stm32, "st,stm32-timer", stm32_clockevent_init);
+TIMER_OF_DECLARE(stm32, "st,stm32-timer", stm32_timer_init);