| Message ID | 20171129112638.15813-6-m.szyprowski@samsung.com |
|---|---|
| State | New |
| Headers | show |
| Series | Power domains support for Exynos5433 SoCs | expand |
Dear Marek, On 2017년 11월 29일 20:26, Marek Szyprowski wrote: > This patch adds support for AUD power domain to Exynos5433 SoCs, which > contains following devices: a clock controller, a pin controller, LPASS > module, I2S controller, ADMA PL330 engine and UART #3 device. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index cfa2a0d4dc2f..2c019a0fd8e3 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -395,6 +395,7 @@ > #clock-cells = <1>; > clock-names = "oscclk", "fout_aud_pll"; > clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; > + power-domains = <&pd_aud>; > }; > > cmu_bus0: clock-controller@13600000 { > @@ -568,6 +569,13 @@ > label = "DISP"; > }; > > + pd_aud: power-domain@105c40c0 { > + compatible = "samsung,exynos5433-pd"; > + reg = <0x105c40c0 0x20>; > + #power-domain-cells = <0>; > + label = "AUD"; > + }; > + > pd_mfc: power-domain@105c4180 { > compatible = "samsung,exynos5433-pd"; > reg = <0x105c4180 0x20>; > @@ -687,6 +695,7 @@ > compatible = "samsung,exynos5433-pinctrl"; > reg = <0x114b0000 0x1000>; > interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&pd_aud>; > }; > > pinctrl_cpif: pinctrl@10fe0000 { > @@ -1566,6 +1575,7 @@ > clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; > clock-names = "sfr0_ctrl"; > samsung,pmu-syscon = <&pmu_system_controller>; > + power-domains = <&pd_aud>; > #address-cells = <1>; > #size-cells = <1>; > ranges; > @@ -1579,6 +1589,7 @@ > #dma-cells = <1>; > #dma-channels = <8>; > #dma-requests = <32>; > + power-domains = <&pd_aud>; > }; > > i2s0: i2s0@11440000 { > @@ -1595,6 +1606,7 @@ > clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; > pinctrl-names = "default"; > pinctrl-0 = <&i2s0_bus>; > + power-domains = <&pd_aud>; > status = "disabled"; > }; > > @@ -1607,6 +1619,7 @@ > clock-names = "uart", "clk_uart_baud0"; > pinctrl-names = "default"; > pinctrl-0 = <&uart_aud_bus>; > + power-domains = <&pd_aud>; > status = "disabled"; > }; > }; > Looks good to me. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> -- Best Regards, Chanwoo Choi Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Nov 29, 2017 at 12:26:37PM +0100, Marek Szyprowski wrote: > This patch adds support for AUD power domain to Exynos5433 SoCs, which > contains following devices: a clock controller, a pin controller, LPASS > module, I2S controller, ADMA PL330 engine and UART #3 device. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > Thanks, applied. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index cfa2a0d4dc2f..2c019a0fd8e3 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -395,6 +395,7 @@ #clock-cells = <1>; clock-names = "oscclk", "fout_aud_pll"; clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; + power-domains = <&pd_aud>; }; cmu_bus0: clock-controller@13600000 { @@ -568,6 +569,13 @@ label = "DISP"; }; + pd_aud: power-domain@105c40c0 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c40c0 0x20>; + #power-domain-cells = <0>; + label = "AUD"; + }; + pd_mfc: power-domain@105c4180 { compatible = "samsung,exynos5433-pd"; reg = <0x105c4180 0x20>; @@ -687,6 +695,7 @@ compatible = "samsung,exynos5433-pinctrl"; reg = <0x114b0000 0x1000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_aud>; }; pinctrl_cpif: pinctrl@10fe0000 { @@ -1566,6 +1575,7 @@ clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; clock-names = "sfr0_ctrl"; samsung,pmu-syscon = <&pmu_system_controller>; + power-domains = <&pd_aud>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1579,6 +1589,7 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; + power-domains = <&pd_aud>; }; i2s0: i2s0@11440000 { @@ -1595,6 +1606,7 @@ clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + power-domains = <&pd_aud>; status = "disabled"; }; @@ -1607,6 +1619,7 @@ clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; pinctrl-0 = <&uart_aud_bus>; + power-domains = <&pd_aud>; status = "disabled"; }; };
This patch adds support for AUD power domain to Exynos5433 SoCs, which contains following devices: a clock controller, a pin controller, LPASS module, I2S controller, ADMA PL330 engine and UART #3 device. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) -- 2.15.0 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html