mbox series

[GIT,PULL] NAND + UniPhier updates for v2018.01-rc1 (2nd trial)

Message ID CAK7LNAT=f+287W5unjYypE=ENHkmwQXumVz18B+z6qmkxc4JOQ@mail.gmail.com
State New
Headers show
Series [GIT,PULL] NAND + UniPhier updates for v2018.01-rc1 (2nd trial) | expand

Pull-request

git://git.denx.de/u-boot-uniphier.git master

Message

Masahiro Yamada Nov. 28, 2017, 3:41 p.m. UTC
Hi Tom,

This is a retry for the NAND + UniPhier pull request.

I inserted
http://patchwork.ozlabs.org/patch/842106/

The build test of openrd boards passed.




The following changes since commit 73a01d90c0b2ed2527283f289f73d69ef52cafa5:

  test: Correct operation when tests pass (2017-11-27 23:05:22 -0500)

are available in the git repository at:

  git://git.denx.de/u-boot-uniphier.git master

for you to fetch changes up to a27bcbf81563880a1cfc805625dc57dbde658e1d:

  ARM: uniphier: remove unused NAND CONFIG options (2017-11-29 00:29:00 +0900)

----------------------------------------------------------------
Boris Brezillon (9):
      mtd: nand: Add an option to maximize the ECC strength
      mtd: nand: automate NAND timings selection
      mtd: nand: Fix data interface configuration logic
      mtd: nand: Add a few more timings to nand_sdr_timings
      mtd: add mtd_ooblayout_xxx() helper functions
      mtd: nand: Drop unused cached programming support
      mtd: nand: Drop the ->errstat() hook
      mtd: nand: Wait for PAGEPROG to finish in drivers setting
NAND_ECC_CUSTOM_PAGE_ACCESS
      mtd: nand: Pass the CS line to ->setup_data_interface()

Marc Gonzalez (1):
      mtd: nand: Support controllers with custom page

Masahiro Yamada (14):
      ARM: openrd: set CONFIG_LOGLEVEL to 2
      bitops: collect BIT macros to include/linux/bitops.h
      mtd: nand: add onfi_* stubs in case ONFI_DETECTION is disabled
      mtd: nand: allow drivers to request minimum alignment for passed buffer
      mtd: nand: add generic helpers to check, match, maximize ECC settings
      mtd: nand: add a shorthand to generate nand_ecc_caps structure
      mtd: nand: introduce NAND_ROW_ADDR_3 flag
      mtd: nand: denali: sync with Linux 4.15-rc1
      ARM: uniphier: set CONFIG_LOGLEVEL to 6
      ARM: uniphier: remove IRQ settings
      ARM: uniphier: remove XIRQ pin settings
      gpio: uniphier: import dt-binginds header from Linux
      ARM: dts: uniphier: Sync with Linux 4.15-rc1
      ARM: uniphier: remove unused NAND CONFIG options

Sascha Hauer (5):
      mtd: nand: remove unnecessary 'extern' from function declarations
      mtd: nand: Create a NAND reset function
      mtd: nand: Introduce nand_data_interface
      mtd: nand: convert ONFI mode into data interface
      mtd: nand: Expose data interface for ONFI mode 0

 arch/arm/dts/uniphier-ld11-ref.dts              |   10 +-
 arch/arm/dts/uniphier-ld11.dtsi                 |   50 +-
 arch/arm/dts/uniphier-ld20-ref.dts              |   10 +-
 arch/arm/dts/uniphier-ld20.dtsi                 |   87 +-
 arch/arm/dts/uniphier-ld4-ref.dts               |   10 +-
 arch/arm/dts/uniphier-ld4.dtsi                  |   23 +-
 arch/arm/dts/uniphier-ld6b-ref.dts              |   10 +-
 arch/arm/dts/uniphier-pinctrl.dtsi              |   52 +-
 arch/arm/dts/uniphier-pro4-ref.dts              |   10 +-
 arch/arm/dts/uniphier-pro4.dtsi                 |   22 +-
 arch/arm/dts/uniphier-pro5.dtsi                 |   16 +-
 arch/arm/dts/uniphier-pxs2.dtsi                 |   66 +-
 arch/arm/dts/uniphier-pxs3-ref.dts              |   10 +-
 arch/arm/dts/uniphier-pxs3.dtsi                 |   42 +-
 arch/arm/dts/uniphier-sld8-ref.dts              |   10 +-
 arch/arm/dts/uniphier-sld8.dtsi                 |   23 +-
 arch/arm/dts/uniphier-support-card.dtsi         |    3 +-
 arch/arm/dts/uniphier-v7-u-boot.dtsi            |    8 +-
 arch/arm/include/asm/arch-sunxi/dram_sunxi_dw.h |    3 +-
 arch/arm/mach-kirkwood/include/mach/gpio.h      |    4 -
 arch/arm/mach-uniphier/board_init.c             |   51 -
 arch/arm/mach-uniphier/sbc/sbc-ld11.c           |    2 +-
 arch/arm/mach-uniphier/sbc/sbc-pxs2.c           |    2 +-
 configs/openrd_base_defconfig                   |    2 +-
 configs/openrd_client_defconfig                 |    2 +-
 configs/openrd_ultimate_defconfig               |    2 +-
 configs/uniphier_ld4_sld8_defconfig             |    1 +
 configs/uniphier_v7_defconfig                   |    1 +
 configs/uniphier_v8_defconfig                   |    1 +
 drivers/gpio/gpio-uniphier.c                    |    3 +-
 drivers/gpio/kw_gpio.c                          |    2 +-
 drivers/mtd/mtdcore.c                           |  360 +++++
 drivers/mtd/nand/Kconfig                        |   11 -
 drivers/mtd/nand/davinci_nand.c                 |   10 +-
 drivers/mtd/nand/denali.c                       | 2027
++++++++++++++-------------
 drivers/mtd/nand/denali.h                       |  473 +++----
 drivers/mtd/nand/denali_dt.c                    |   17 +-
 drivers/mtd/nand/denali_spl.c                   |   14 +-
 drivers/mtd/nand/nand_base.c                    |  530 ++++++-
 drivers/mtd/nand/nand_timings.c                 |  494 ++++---
 include/configs/uniphier.h                      |    5 -
 include/dt-bindings/gpio/uniphier-gpio.h        |   18 +
 include/linux/bitops.h                          |    7 +
 include/linux/mtd/mtd.h                         |   57 +
 include/linux/mtd/nand.h                        |  314 ++++-
 include/usb/lin_gadget_compat.h                 |    4 +-
 46 files changed, 3109 insertions(+), 1770 deletions(-)
 create mode 100644 include/dt-bindings/gpio/uniphier-gpio.h

Comments

Tom Rini Nov. 29, 2017, 4:23 a.m. UTC | #1
On Wed, Nov 29, 2017 at 12:41:12AM +0900, Masahiro Yamada wrote:

> Hi Tom,

> 

> This is a retry for the NAND + UniPhier pull request.

> 

> I inserted

> http://patchwork.ozlabs.org/patch/842106/

> 

> The build test of openrd boards passed.

> 

> 

> 

> 

> The following changes since commit 73a01d90c0b2ed2527283f289f73d69ef52cafa5:

> 

>   test: Correct operation when tests pass (2017-11-27 23:05:22 -0500)

> 

> are available in the git repository at:

> 

>   git://git.denx.de/u-boot-uniphier.git master

> 

> for you to fetch changes up to a27bcbf81563880a1cfc805625dc57dbde658e1d:

> 

>   ARM: uniphier: remove unused NAND CONFIG options (2017-11-29 00:29:00 +0900)

> 


Applied to u-boot/master, thanks!

-- 
Tom