Message ID | 20171018092802.25390-3-m.szyprowski@samsung.com |
---|---|
State | New |
Headers | show |
Series | [1/2] extcon: max88743: Add OTG power control to the MUIC driver | expand |
Hi Marek, Also, this patch need to fix the patch subject as following: - max88743 -> max77843 If you fix the subject, feel free to add my acked-tag. Acked-by: Chanwoo Choi <cw00.choi@samsung.com> After finishing the review from MFD maintainer, I'll merge them. Regards, Chanwoo Choi On 2017년 10월 18일 18:28, Marek Szyprowski wrote: > SmartDock uses ADC_RESERVED_ACC_3 (0x10) ADC ID type and provides following > features: > 1. USB host with embedded USB hub (2-4 ports) for mice, keyboard, etc, > 2. MHL for video output, > 3. charging. > > Tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > drivers/extcon/extcon-max77843.c | 77 +++++++++++++++++++++++++++++------- > include/linux/mfd/max77843-private.h | 2 + > 2 files changed, 65 insertions(+), 14 deletions(-) > > diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c > index 217c743405f8..cc28d2622ae7 100644 > --- a/drivers/extcon/extcon-max77843.c > +++ b/drivers/extcon/extcon-max77843.c > @@ -80,7 +80,7 @@ enum max77843_muic_accessory_type { > MAX77843_MUIC_ADC_REMOTE_S12_BUTTON, > MAX77843_MUIC_ADC_RESERVED_ACC_1, > MAX77843_MUIC_ADC_RESERVED_ACC_2, > - MAX77843_MUIC_ADC_RESERVED_ACC_3, > + MAX77843_MUIC_ADC_RESERVED_ACC_3, /* SmartDock */ > MAX77843_MUIC_ADC_RESERVED_ACC_4, > MAX77843_MUIC_ADC_RESERVED_ACC_5, > MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2, > @@ -119,6 +119,7 @@ enum max77843_muic_charger_type { > MAX77843_MUIC_CHG_SPECIAL_BIAS, > MAX77843_MUIC_CHG_RESERVED, > MAX77843_MUIC_CHG_GND, > + MAX77843_MUIC_CHG_DOCK, > }; > > static const unsigned int max77843_extcon_cable[] = { > @@ -130,6 +131,7 @@ static const unsigned int max77843_extcon_cable[] = { > EXTCON_CHG_USB_FAST, > EXTCON_CHG_USB_SLOW, > EXTCON_DISP_MHL, > + EXTCON_DOCK, > EXTCON_JIG, > EXTCON_NONE, > }; > @@ -200,7 +202,7 @@ static const struct regmap_irq_chip max77843_muic_irq_chip = { > }; > > static int max77843_muic_set_path(struct max77843_muic_info *info, > - u8 val, bool attached) > + u8 val, bool attached, bool nobccomp) > { > struct max77693_dev *max77843 = info->max77843; > int ret = 0; > @@ -210,10 +212,16 @@ static int max77843_muic_set_path(struct max77843_muic_info *info, > ctrl1 = val; > else > ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN; > + if (nobccomp) { > + /* Disable BC1.2 protocol and force manual switch control */ > + ctrl1 |= MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK; > + } > > ret = regmap_update_bits(max77843->regmap_muic, > MAX77843_MUIC_REG_CONTROL1, > - MAX77843_MUIC_CONTROL1_COM_SW, ctrl1); > + MAX77843_MUIC_CONTROL1_COM_SW | > + MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK, > + ctrl1); > if (ret < 0) { > dev_err(info->dev, "Cannot switch MUIC port\n"); > return ret; > @@ -303,6 +311,19 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info, > break; > } > > + if (adc == MAX77843_MUIC_ADC_RESERVED_ACC_3) { /* SmartDock */ > + if (chg_type == MAX77843_MUIC_CHG_NONE) { > + *attached = false; > + cable_type = info->prev_chg_type; > + info->prev_chg_type = MAX77843_MUIC_CHG_NONE; > + } else { > + *attached = true; > + cable_type = MAX77843_MUIC_CHG_DOCK; > + info->prev_chg_type = MAX77843_MUIC_CHG_DOCK; > + } > + break; > + } > + > if (chg_type == MAX77843_MUIC_CHG_NONE) { > *attached = false; > cable_type = info->prev_chg_type; > @@ -365,7 +386,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) > case MAX77843_MUIC_GND_USB_HOST_VB: > ret = max77843_muic_set_path(info, > MAX77843_MUIC_CONTROL1_SW_USB, > - attached); > + attached, false); > if (ret < 0) > return ret; > > @@ -376,7 +397,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) > case MAX77843_MUIC_GND_MHL: > ret = max77843_muic_set_path(info, > MAX77843_MUIC_CONTROL1_SW_OPEN, > - attached); > + attached, false); > if (ret < 0) > return ret; > > @@ -412,7 +433,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info, > return -EINVAL; > } > > - ret = max77843_muic_set_path(info, path, attached); > + ret = max77843_muic_set_path(info, path, attached, false); > if (ret < 0) > return ret; > > @@ -421,6 +442,26 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info, > return 0; > } > > +static int max77843_muic_dock_handler(struct max77843_muic_info *info, > + bool attached) > +{ > + int ret; > + > + dev_dbg(info->dev, "external connector is %s (adc: 0x10)\n", > + attached ? "attached" : "detached"); > + > + ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB, > + attached, attached); > + if (ret < 0) > + return ret; > + > + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); > + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); > + extcon_set_state_sync(info->edev, EXTCON_DOCK, attached); > + > + return 0; > +} > + > static int max77843_muic_adc_handler(struct max77843_muic_info *info) > { > int ret, cable_type; > @@ -435,6 +476,11 @@ static int max77843_muic_adc_handler(struct max77843_muic_info *info) > info->prev_cable_type); > > switch (cable_type) { > + case MAX77843_MUIC_ADC_RESERVED_ACC_3: /* SmartDock */ > + ret = max77843_muic_dock_handler(info, attached); > + if (ret < 0) > + return ret; > + break; > case MAX77843_MUIC_ADC_GROUND: > ret = max77843_muic_adc_gnd_handler(info); > if (ret < 0) > @@ -462,7 +508,6 @@ static int max77843_muic_adc_handler(struct max77843_muic_info *info) > case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON: > case MAX77843_MUIC_ADC_RESERVED_ACC_1: > case MAX77843_MUIC_ADC_RESERVED_ACC_2: > - case MAX77843_MUIC_ADC_RESERVED_ACC_3: > case MAX77843_MUIC_ADC_RESERVED_ACC_4: > case MAX77843_MUIC_ADC_RESERVED_ACC_5: > case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2: > @@ -506,7 +551,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) > case MAX77843_MUIC_CHG_USB: > ret = max77843_muic_set_path(info, > MAX77843_MUIC_CONTROL1_SW_USB, > - attached); > + attached, false); > if (ret < 0) > return ret; > > @@ -517,7 +562,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) > case MAX77843_MUIC_CHG_DOWNSTREAM: > ret = max77843_muic_set_path(info, > MAX77843_MUIC_CONTROL1_SW_OPEN, > - attached); > + attached, false); > if (ret < 0) > return ret; > > @@ -527,7 +572,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) > case MAX77843_MUIC_CHG_DEDICATED: > ret = max77843_muic_set_path(info, > MAX77843_MUIC_CONTROL1_SW_OPEN, > - attached); > + attached, false); > if (ret < 0) > return ret; > > @@ -537,7 +582,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) > case MAX77843_MUIC_CHG_SPECIAL_500MA: > ret = max77843_muic_set_path(info, > MAX77843_MUIC_CONTROL1_SW_OPEN, > - attached); > + attached, false); > if (ret < 0) > return ret; > > @@ -547,7 +592,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) > case MAX77843_MUIC_CHG_SPECIAL_1A: > ret = max77843_muic_set_path(info, > MAX77843_MUIC_CONTROL1_SW_OPEN, > - attached); > + attached, false); > if (ret < 0) > return ret; > > @@ -566,6 +611,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) > extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, > false); > break; > + case MAX77843_MUIC_CHG_DOCK: > + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached); > + break; > case MAX77843_MUIC_CHG_NONE: > break; > default: > @@ -574,7 +622,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) > attached ? "attached" : "detached", chg_type); > > max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, > - attached); > + attached, false); > return -EINVAL; > } > > @@ -814,7 +862,8 @@ static int max77843_muic_probe(struct platform_device *pdev) > max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS); > > /* Set initial path for UART */ > - max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true); > + max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true, > + false); > > /* Check revision number of MUIC device */ > ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id); > diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h > index 0223cd5941c8..b8908bf8d315 100644 > --- a/include/linux/mfd/max77843-private.h > +++ b/include/linux/mfd/max77843-private.h > @@ -350,6 +350,7 @@ enum max77843_irq_muic { > /* MAX77843 CONTROL register */ > #define MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT 0 > #define MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT 3 > +#define MAX77843_MUIC_CONTROL1_NOBCCOMP_SHIFT 6 > #define MAX77843_MUIC_CONTROL1_IDBEN_SHIFT 7 > #define MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT 0 > #define MAX77843_MUIC_CONTROL2_ADCEN_SHIFT 1 > @@ -366,6 +367,7 @@ enum max77843_irq_muic { > #define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT) > #define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT) > #define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(MAX77843_MUIC_CONTROL1_IDBEN_SHIFT) > +#define MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK BIT(MAX77843_MUIC_CONTROL1_NOBCCOMP_SHIFT) > #define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT) > #define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(MAX77843_MUIC_CONTROL2_ADCEN_SHIFT) > #define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(MAX77843_MUIC_CONTROL2_CPEN_SHIFT) > -- Best Regards, Chanwoo Choi Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c index 217c743405f8..cc28d2622ae7 100644 --- a/drivers/extcon/extcon-max77843.c +++ b/drivers/extcon/extcon-max77843.c @@ -80,7 +80,7 @@ enum max77843_muic_accessory_type { MAX77843_MUIC_ADC_REMOTE_S12_BUTTON, MAX77843_MUIC_ADC_RESERVED_ACC_1, MAX77843_MUIC_ADC_RESERVED_ACC_2, - MAX77843_MUIC_ADC_RESERVED_ACC_3, + MAX77843_MUIC_ADC_RESERVED_ACC_3, /* SmartDock */ MAX77843_MUIC_ADC_RESERVED_ACC_4, MAX77843_MUIC_ADC_RESERVED_ACC_5, MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2, @@ -119,6 +119,7 @@ enum max77843_muic_charger_type { MAX77843_MUIC_CHG_SPECIAL_BIAS, MAX77843_MUIC_CHG_RESERVED, MAX77843_MUIC_CHG_GND, + MAX77843_MUIC_CHG_DOCK, }; static const unsigned int max77843_extcon_cable[] = { @@ -130,6 +131,7 @@ static const unsigned int max77843_extcon_cable[] = { EXTCON_CHG_USB_FAST, EXTCON_CHG_USB_SLOW, EXTCON_DISP_MHL, + EXTCON_DOCK, EXTCON_JIG, EXTCON_NONE, }; @@ -200,7 +202,7 @@ static const struct regmap_irq_chip max77843_muic_irq_chip = { }; static int max77843_muic_set_path(struct max77843_muic_info *info, - u8 val, bool attached) + u8 val, bool attached, bool nobccomp) { struct max77693_dev *max77843 = info->max77843; int ret = 0; @@ -210,10 +212,16 @@ static int max77843_muic_set_path(struct max77843_muic_info *info, ctrl1 = val; else ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN; + if (nobccomp) { + /* Disable BC1.2 protocol and force manual switch control */ + ctrl1 |= MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK; + } ret = regmap_update_bits(max77843->regmap_muic, MAX77843_MUIC_REG_CONTROL1, - MAX77843_MUIC_CONTROL1_COM_SW, ctrl1); + MAX77843_MUIC_CONTROL1_COM_SW | + MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK, + ctrl1); if (ret < 0) { dev_err(info->dev, "Cannot switch MUIC port\n"); return ret; @@ -303,6 +311,19 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info, break; } + if (adc == MAX77843_MUIC_ADC_RESERVED_ACC_3) { /* SmartDock */ + if (chg_type == MAX77843_MUIC_CHG_NONE) { + *attached = false; + cable_type = info->prev_chg_type; + info->prev_chg_type = MAX77843_MUIC_CHG_NONE; + } else { + *attached = true; + cable_type = MAX77843_MUIC_CHG_DOCK; + info->prev_chg_type = MAX77843_MUIC_CHG_DOCK; + } + break; + } + if (chg_type == MAX77843_MUIC_CHG_NONE) { *attached = false; cable_type = info->prev_chg_type; @@ -365,7 +386,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) case MAX77843_MUIC_GND_USB_HOST_VB: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB, - attached); + attached, false); if (ret < 0) return ret; @@ -376,7 +397,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) case MAX77843_MUIC_GND_MHL: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); if (ret < 0) return ret; @@ -412,7 +433,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info, return -EINVAL; } - ret = max77843_muic_set_path(info, path, attached); + ret = max77843_muic_set_path(info, path, attached, false); if (ret < 0) return ret; @@ -421,6 +442,26 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info, return 0; } +static int max77843_muic_dock_handler(struct max77843_muic_info *info, + bool attached) +{ + int ret; + + dev_dbg(info->dev, "external connector is %s (adc: 0x10)\n", + attached ? "attached" : "detached"); + + ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB, + attached, attached); + if (ret < 0) + return ret; + + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); + extcon_set_state_sync(info->edev, EXTCON_DOCK, attached); + + return 0; +} + static int max77843_muic_adc_handler(struct max77843_muic_info *info) { int ret, cable_type; @@ -435,6 +476,11 @@ static int max77843_muic_adc_handler(struct max77843_muic_info *info) info->prev_cable_type); switch (cable_type) { + case MAX77843_MUIC_ADC_RESERVED_ACC_3: /* SmartDock */ + ret = max77843_muic_dock_handler(info, attached); + if (ret < 0) + return ret; + break; case MAX77843_MUIC_ADC_GROUND: ret = max77843_muic_adc_gnd_handler(info); if (ret < 0) @@ -462,7 +508,6 @@ static int max77843_muic_adc_handler(struct max77843_muic_info *info) case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON: case MAX77843_MUIC_ADC_RESERVED_ACC_1: case MAX77843_MUIC_ADC_RESERVED_ACC_2: - case MAX77843_MUIC_ADC_RESERVED_ACC_3: case MAX77843_MUIC_ADC_RESERVED_ACC_4: case MAX77843_MUIC_ADC_RESERVED_ACC_5: case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2: @@ -506,7 +551,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) case MAX77843_MUIC_CHG_USB: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB, - attached); + attached, false); if (ret < 0) return ret; @@ -517,7 +562,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) case MAX77843_MUIC_CHG_DOWNSTREAM: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); if (ret < 0) return ret; @@ -527,7 +572,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) case MAX77843_MUIC_CHG_DEDICATED: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); if (ret < 0) return ret; @@ -537,7 +582,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) case MAX77843_MUIC_CHG_SPECIAL_500MA: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); if (ret < 0) return ret; @@ -547,7 +592,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) case MAX77843_MUIC_CHG_SPECIAL_1A: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); if (ret < 0) return ret; @@ -566,6 +611,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, false); break; + case MAX77843_MUIC_CHG_DOCK: + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached); + break; case MAX77843_MUIC_CHG_NONE: break; default: @@ -574,7 +622,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) attached ? "attached" : "detached", chg_type); max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); return -EINVAL; } @@ -814,7 +862,8 @@ static int max77843_muic_probe(struct platform_device *pdev) max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS); /* Set initial path for UART */ - max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true); + max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true, + false); /* Check revision number of MUIC device */ ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id); diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h index 0223cd5941c8..b8908bf8d315 100644 --- a/include/linux/mfd/max77843-private.h +++ b/include/linux/mfd/max77843-private.h @@ -350,6 +350,7 @@ enum max77843_irq_muic { /* MAX77843 CONTROL register */ #define MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT 0 #define MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT 3 +#define MAX77843_MUIC_CONTROL1_NOBCCOMP_SHIFT 6 #define MAX77843_MUIC_CONTROL1_IDBEN_SHIFT 7 #define MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT 0 #define MAX77843_MUIC_CONTROL2_ADCEN_SHIFT 1 @@ -366,6 +367,7 @@ enum max77843_irq_muic { #define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT) #define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT) #define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(MAX77843_MUIC_CONTROL1_IDBEN_SHIFT) +#define MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK BIT(MAX77843_MUIC_CONTROL1_NOBCCOMP_SHIFT) #define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT) #define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(MAX77843_MUIC_CONTROL2_ADCEN_SHIFT) #define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(MAX77843_MUIC_CONTROL2_CPEN_SHIFT)
SmartDock uses ADC_RESERVED_ACC_3 (0x10) ADC ID type and provides following features: 1. USB host with embedded USB hub (2-4 ports) for mice, keyboard, etc, 2. MHL for video output, 3. charging. Tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- drivers/extcon/extcon-max77843.c | 77 +++++++++++++++++++++++++++++------- include/linux/mfd/max77843-private.h | 2 + 2 files changed, 65 insertions(+), 14 deletions(-) -- 2.14.2 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html