| Message ID | 1507109270-24646-1-git-send-email-benjamin.gaignard@linaro.org |
|---|---|
| State | Accepted |
| Commit | 9bd7b77af8e48709f34d38f50846e0a2c2882f4c |
| Headers | show |
| Series | ARM: dts: stm32: add Timers driver for stm32f746 MCU | expand |
Hi Benjamin, On 10/04/2017 11:27 AM, Benjamin Gaignard wrote: > Add Timers and it sub-nodes into DT for stm32f746 family. > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> > --- > arch/arm/boot/dts/stm32f746.dtsi | 270 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 270 insertions(+) > > diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi > index 4506eb9..ae84816 100644 > --- a/arch/arm/boot/dts/stm32f746.dtsi > +++ b/arch/arm/boot/dts/stm32f746.dtsi > @@ -82,6 +82,27 @@ > status = "disabled"; > }; > > + timers2: timers@40000000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40000000 0x400>; > + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + > + timer@1 { > + compatible = "st,stm32-timer-trigger"; > + reg = <1>; > + status = "disabled"; > + }; > + }; > + > timer3: timer@40000400 { > compatible = "st,stm32-timer"; > reg = <0x40000400 0x400>; > @@ -90,6 +111,27 @@ > status = "disabled"; > }; > > + timers3: timers@40000400 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40000400 0x400>; > + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + > + timer@2 { > + compatible = "st,stm32-timer-trigger"; > + reg = <2>; > + status = "disabled"; > + }; > + }; > + > timer4: timer@40000800 { > compatible = "st,stm32-timer"; > reg = <0x40000800 0x400>; > @@ -98,6 +140,27 @@ > status = "disabled"; > }; > > + timers4: timers@40000800 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40000800 0x400>; > + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + > + timer@3 { > + compatible = "st,stm32-timer-trigger"; > + reg = <3>; > + status = "disabled"; > + }; > + }; > + > timer5: timer@40000c00 { > compatible = "st,stm32-timer"; > reg = <0x40000c00 0x400>; > @@ -105,6 +168,27 @@ > clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; > }; > > + timers5: timers@40000c00 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40000C00 0x400>; > + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + > + timer@4 { > + compatible = "st,stm32-timer-trigger"; > + reg = <4>; > + status = "disabled"; > + }; > + }; > + > timer6: timer@40001000 { > compatible = "st,stm32-timer"; > reg = <0x40001000 0x400>; > @@ -113,6 +197,22 @@ > status = "disabled"; > }; > > + timers6: timers@40001000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40001000 0x400>; > + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>; > + clock-names = "int"; > + status = "disabled"; > + > + timer@5 { > + compatible = "st,stm32-timer-trigger"; > + reg = <5>; > + status = "disabled"; > + }; > + }; > + > timer7: timer@40001400 { > compatible = "st,stm32-timer"; > reg = <0x40001400 0x400>; > @@ -121,6 +221,73 @@ > status = "disabled"; > }; > > + timers7: timers@40001400 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40001400 0x400>; > + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>; > + clock-names = "int"; > + status = "disabled"; > + > + timer@6 { > + compatible = "st,stm32-timer-trigger"; > + reg = <6>; > + status = "disabled"; > + }; > + }; > + > + timers12: timers@40001800 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40001800 0x400>; > + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + > + timer@11 { > + compatible = "st,stm32-timer-trigger"; > + reg = <11>; > + status = "disabled"; > + }; > + }; > + > + timers13: timers@40001c00 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40001C00 0x400>; > + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + }; > + > + timers14: timers@40002000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40002000 0x400>; > + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + }; > + > rtc: rtc@40002800 { > compatible = "st,stm32-rtc"; > reg = <0x40002800 0x400>; > @@ -183,6 +350,48 @@ > status = "disabled"; > }; > > + timers1: timers@40010000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40010000 0x400>; > + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + > + timer@0 { > + compatible = "st,stm32-timer-trigger"; > + reg = <0>; > + status = "disabled"; > + }; > + }; > + > + timers8: timers@40010400 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40010400 0x400>; > + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + > + timer@7 { > + compatible = "st,stm32-timer-trigger"; > + reg = <7>; > + status = "disabled"; > + }; > + }; > + > usart1: serial@40011000 { > compatible = "st,stm32f7-usart", "st,stm32f7-uart"; > reg = <0x40011000 0x400>; > @@ -212,11 +421,72 @@ > interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; > }; > > + timers9: timers@40014000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40014000 0x400>; > + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + > + timer@8 { > + compatible = "st,stm32-timer-trigger"; > + reg = <8>; > + status = "disabled"; > + }; > + }; > + > + timers10: timers@40014400 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40014400 0x400>; > + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + }; > + > + timers11: timers@40014800 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-timers"; > + reg = <0x40014800 0x400>; > + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>; > + clock-names = "int"; > + status = "disabled"; > + > + pwm { > + compatible = "st,stm32-pwm"; > + status = "disabled"; > + }; > + }; > + > pwrcfg: power-config@40007000 { > compatible = "syscon"; > reg = <0x40007000 0x400>; > }; > > + ltdc: display-controller@40016800 { > + compatible = "st,stm32-ltdc"; > + reg = <0x40016800 0x200>; > + interrupts = <88>, <89>; > + resets = <&rcc STM32F7_APB2_RESET(LTDC)>; > + clocks = <&rcc 1 CLK_LCD>; > + clock-names = "lcd"; > + status = "disabled"; > + }; > + Why do you add ltdc node in this patch ? Maybe a separate patch would be better. > pin-controller { > #address-cells = <1>; > #size-cells = <1>; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2017-10-05 18:06 GMT+02:00 Alexandre Torgue <alexandre.torgue@st.com>: > Hi Benjamin, > > On 10/04/2017 11:27 AM, Benjamin Gaignard wrote: >> >> Add Timers and it sub-nodes into DT for stm32f746 family. >> >> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> >> --- >> arch/arm/boot/dts/stm32f746.dtsi | 270 >> +++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 270 insertions(+) >> >> diff --git a/arch/arm/boot/dts/stm32f746.dtsi >> b/arch/arm/boot/dts/stm32f746.dtsi >> index 4506eb9..ae84816 100644 >> --- a/arch/arm/boot/dts/stm32f746.dtsi >> +++ b/arch/arm/boot/dts/stm32f746.dtsi >> @@ -82,6 +82,27 @@ >> status = "disabled"; >> }; >> + timers2: timers@40000000 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40000000 0x400>; >> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + >> + timer@1 { >> + compatible = "st,stm32-timer-trigger"; >> + reg = <1>; >> + status = "disabled"; >> + }; >> + }; >> + >> timer3: timer@40000400 { >> compatible = "st,stm32-timer"; >> reg = <0x40000400 0x400>; >> @@ -90,6 +111,27 @@ >> status = "disabled"; >> }; >> + timers3: timers@40000400 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40000400 0x400>; >> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + >> + timer@2 { >> + compatible = "st,stm32-timer-trigger"; >> + reg = <2>; >> + status = "disabled"; >> + }; >> + }; >> + >> timer4: timer@40000800 { >> compatible = "st,stm32-timer"; >> reg = <0x40000800 0x400>; >> @@ -98,6 +140,27 @@ >> status = "disabled"; >> }; >> + timers4: timers@40000800 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40000800 0x400>; >> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + >> + timer@3 { >> + compatible = "st,stm32-timer-trigger"; >> + reg = <3>; >> + status = "disabled"; >> + }; >> + }; >> + >> timer5: timer@40000c00 { >> compatible = "st,stm32-timer"; >> reg = <0x40000c00 0x400>; >> @@ -105,6 +168,27 @@ >> clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; >> }; >> + timers5: timers@40000c00 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40000C00 0x400>; >> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + >> + timer@4 { >> + compatible = "st,stm32-timer-trigger"; >> + reg = <4>; >> + status = "disabled"; >> + }; >> + }; >> + >> timer6: timer@40001000 { >> compatible = "st,stm32-timer"; >> reg = <0x40001000 0x400>; >> @@ -113,6 +197,22 @@ >> status = "disabled"; >> }; >> + timers6: timers@40001000 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40001000 0x400>; >> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + timer@5 { >> + compatible = "st,stm32-timer-trigger"; >> + reg = <5>; >> + status = "disabled"; >> + }; >> + }; >> + >> timer7: timer@40001400 { >> compatible = "st,stm32-timer"; >> reg = <0x40001400 0x400>; >> @@ -121,6 +221,73 @@ >> status = "disabled"; >> }; >> + timers7: timers@40001400 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40001400 0x400>; >> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + timer@6 { >> + compatible = "st,stm32-timer-trigger"; >> + reg = <6>; >> + status = "disabled"; >> + }; >> + }; >> + >> + timers12: timers@40001800 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40001800 0x400>; >> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + >> + timer@11 { >> + compatible = "st,stm32-timer-trigger"; >> + reg = <11>; >> + status = "disabled"; >> + }; >> + }; >> + >> + timers13: timers@40001c00 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40001C00 0x400>; >> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + }; >> + >> + timers14: timers@40002000 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40002000 0x400>; >> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + }; >> + >> rtc: rtc@40002800 { >> compatible = "st,stm32-rtc"; >> reg = <0x40002800 0x400>; >> @@ -183,6 +350,48 @@ >> status = "disabled"; >> }; >> + timers1: timers@40010000 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40010000 0x400>; >> + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + >> + timer@0 { >> + compatible = "st,stm32-timer-trigger"; >> + reg = <0>; >> + status = "disabled"; >> + }; >> + }; >> + >> + timers8: timers@40010400 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40010400 0x400>; >> + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + >> + timer@7 { >> + compatible = "st,stm32-timer-trigger"; >> + reg = <7>; >> + status = "disabled"; >> + }; >> + }; >> + >> usart1: serial@40011000 { >> compatible = "st,stm32f7-usart", >> "st,stm32f7-uart"; >> reg = <0x40011000 0x400>; >> @@ -212,11 +421,72 @@ >> interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, >> <10>, <23>, <40>, <41>, <42>, <62>, <76>; >> }; >> + timers9: timers@40014000 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40014000 0x400>; >> + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + >> + timer@8 { >> + compatible = "st,stm32-timer-trigger"; >> + reg = <8>; >> + status = "disabled"; >> + }; >> + }; >> + >> + timers10: timers@40014400 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40014400 0x400>; >> + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + }; >> + >> + timers11: timers@40014800 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-timers"; >> + reg = <0x40014800 0x400>; >> + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>; >> + clock-names = "int"; >> + status = "disabled"; >> + >> + pwm { >> + compatible = "st,stm32-pwm"; >> + status = "disabled"; >> + }; >> + }; >> + >> pwrcfg: power-config@40007000 { >> compatible = "syscon"; >> reg = <0x40007000 0x400>; >> }; >> + ltdc: display-controller@40016800 { >> + compatible = "st,stm32-ltdc"; >> + reg = <0x40016800 0x200>; >> + interrupts = <88>, <89>; >> + resets = <&rcc STM32F7_APB2_RESET(LTDC)>; >> + clocks = <&rcc 1 CLK_LCD>; >> + clock-names = "lcd"; >> + status = "disabled"; >> + }; >> + > > > Why do you add ltdc node in this patch ? Maybe a separate patch would be > better. Sorry you got a teaser of the next patch I will send a v2 without it > > >> pin-controller { >> #address-cells = <1>; >> #size-cells = <1>; >> > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 4506eb9..ae84816 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -82,6 +82,27 @@ status = "disabled"; }; + timers2: timers@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32-timer-trigger"; + reg = <1>; + status = "disabled"; + }; + }; + timer3: timer@40000400 { compatible = "st,stm32-timer"; reg = <0x40000400 0x400>; @@ -90,6 +111,27 @@ status = "disabled"; }; + timers3: timers@40000400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000400 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + timer4: timer@40000800 { compatible = "st,stm32-timer"; reg = <0x40000800 0x400>; @@ -98,6 +140,27 @@ status = "disabled"; }; + timers4: timers@40000800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000800 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + }; + timer5: timer@40000c00 { compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; @@ -105,6 +168,27 @@ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; }; + timers5: timers@40000c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000C00 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32-timer-trigger"; + reg = <4>; + status = "disabled"; + }; + }; + timer6: timer@40001000 { compatible = "st,stm32-timer"; reg = <0x40001000 0x400>; @@ -113,6 +197,22 @@ status = "disabled"; }; + timers6: timers@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>; + clock-names = "int"; + status = "disabled"; + + timer@5 { + compatible = "st,stm32-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + timer7: timer@40001400 { compatible = "st,stm32-timer"; reg = <0x40001400 0x400>; @@ -121,6 +221,73 @@ status = "disabled"; }; + timers7: timers@40001400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001400 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>; + clock-names = "int"; + status = "disabled"; + + timer@6 { + compatible = "st,stm32-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timers@40001800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001800 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timers@40001c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001C00 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers14: timers@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + rtc: rtc@40002800 { compatible = "st,stm32-rtc"; reg = <0x40002800 0x400>; @@ -183,6 +350,48 @@ status = "disabled"; }; + timers1: timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timers@40010400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010400 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + }; + usart1: serial@40011000 { compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40011000 0x400>; @@ -212,11 +421,72 @@ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; }; + timers9: timers@40014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014000 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@8 { + compatible = "st,stm32-timer-trigger"; + reg = <8>; + status = "disabled"; + }; + }; + + timers10: timers@40014400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014400 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers11: timers@40014800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014800 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + pwrcfg: power-config@40007000 { compatible = "syscon"; reg = <0x40007000 0x400>; }; + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F7_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + status = "disabled"; + }; + pin-controller { #address-cells = <1>; #size-cells = <1>;
Add Timers and it sub-nodes into DT for stm32f746 family. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> --- arch/arm/boot/dts/stm32f746.dtsi | 270 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 270 insertions(+) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html