diff mbox series

[v8,1/3] clk: qcom: Add A53 PLL support

Message ID 20170623161533.20449-2-georgi.djakov@linaro.org
State New
Headers show
Series [v8,1/3] clk: qcom: Add A53 PLL support | expand

Commit Message

Georgi Djakov June 23, 2017, 4:15 p.m. UTC
The CPUs on Qualcomm MSM8916-based platforms are clocked by two PLLs,
a primary (A53) CPU PLL and a secondary fixed-rate GPLL0. These sources
are connected to a mux and half-integer divider, which is feeding the
CPU cores.

This patch adds support for the primary CPU PLL which generates the
higher range of frequencies above 1GHz.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

---
 .../devicetree/bindings/clock/qcom,a53pll.txt      | 22 +++++
 drivers/clk/qcom/Kconfig                           |  9 +++
 drivers/clk/qcom/Makefile                          |  1 +
 drivers/clk/qcom/a53-pll.c                         | 94 ++++++++++++++++++++++
 4 files changed, 126 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53pll.txt
 create mode 100644 drivers/clk/qcom/a53-pll.c

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Rob Herring (Arm) June 26, 2017, 7:40 p.m. UTC | #1
On Fri, Jun 23, 2017 at 07:15:31PM +0300, Georgi Djakov wrote:
> The CPUs on Qualcomm MSM8916-based platforms are clocked by two PLLs,

> a primary (A53) CPU PLL and a secondary fixed-rate GPLL0. These sources

> are connected to a mux and half-integer divider, which is feeding the

> CPU cores.

> 

> This patch adds support for the primary CPU PLL which generates the

> higher range of frequencies above 1GHz.

> 

> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

> ---

>  .../devicetree/bindings/clock/qcom,a53pll.txt      | 22 +++++


It's preferred to split bindings to a separate patch. In any case,

Acked-by: Rob Herring <robh@kernel.org>


One kconfig comment though:

>  drivers/clk/qcom/Kconfig                           |  9 +++

>  drivers/clk/qcom/Makefile                          |  1 +

>  drivers/clk/qcom/a53-pll.c                         | 94 ++++++++++++++++++++++

>  4 files changed, 126 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53pll.txt

>  create mode 100644 drivers/clk/qcom/a53-pll.c

> 

> diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.txt b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt

> new file mode 100644

> index 000000000000..f4c2fddf6e7f

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt

> @@ -0,0 +1,22 @@

> +MSM8916 A53 PLL Binding

> +---------------

> +The A53 PLL on MSM8916 platforms is the main CPU PLL used used for frequencies

> +above 1GHz.

> +

> +Required properties :

> +- compatible : Shall contain only one of the following:

> +

> +		"qcom,msm8916-a53pll"

> +

> +- reg : shall contain base register location and length

> +

> +- #clock-cells : must be set to <0>

> +

> +Example:

> +

> +	a53pll: clock@b016000 {

> +		compatible = "qcom,msm8916-a53pll";

> +		reg = <0xb016000 0x40>;

> +		#clock-cells = <0>;

> +	};

> +

> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig

> index 9f6c278deead..057cf60ed037 100644

> --- a/drivers/clk/qcom/Kconfig

> +++ b/drivers/clk/qcom/Kconfig

> @@ -12,6 +12,15 @@ config COMMON_CLK_QCOM

>  	select REGMAP_MMIO

>  	select RESET_CONTROLLER

>  

> +config QCOM_A53PLL

> +	bool "A53 PLL"


Figuring out config options needed for a specific QC SoC is "fun". If 
this is only for MSM8916, then add that to the config option or prompt 
text at least.

And please update the arm64 defconfig with this option.

> +	depends on COMMON_CLK_QCOM

> +	help

> +	  Support for the A53 PLL on Qualcomm MSM8916 devices. It provides

> +	  support for CPU frequencies above 1GHz.

> +	  Say Y if you want to support CPU frequency scaling on devices

> +	  such as MSM8916.

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Riku Voipio June 27, 2017, 9:48 a.m. UTC | #2
On 26 June 2017 at 22:40, Rob Herring <robh@kernel.org> wrote:
> On Fri, Jun 23, 2017 at 07:15:31PM +0300, Georgi Djakov wrote:

>> The CPUs on Qualcomm MSM8916-based platforms are clocked by two PLLs,

>> a primary (A53) CPU PLL and a secondary fixed-rate GPLL0. These sources

>> are connected to a mux and half-integer divider, which is feeding the

>> CPU cores.

>>

>> This patch adds support for the primary CPU PLL which generates the

>> higher range of frequencies above 1GHz.

>>

>> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

>> ---

>>  .../devicetree/bindings/clock/qcom,a53pll.txt      | 22 +++++

>

> It's preferred to split bindings to a separate patch. In any case,

>

> Acked-by: Rob Herring <robh@kernel.org>

>

> One kconfig comment though:

>

>>  drivers/clk/qcom/Kconfig                           |  9 +++

>>  drivers/clk/qcom/Makefile                          |  1 +

>>  drivers/clk/qcom/a53-pll.c                         | 94 ++++++++++++++++++++++

>>  4 files changed, 126 insertions(+)

>>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53pll.txt

>>  create mode 100644 drivers/clk/qcom/a53-pll.c

>>

>> diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.txt b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt

>> new file mode 100644

>> index 000000000000..f4c2fddf6e7f

>> --- /dev/null

>> +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt

>> @@ -0,0 +1,22 @@

>> +MSM8916 A53 PLL Binding

>> +---------------

>> +The A53 PLL on MSM8916 platforms is the main CPU PLL used used for frequencies

>> +above 1GHz.

>> +

>> +Required properties :

>> +- compatible : Shall contain only one of the following:

>> +

>> +             "qcom,msm8916-a53pll"

>> +

>> +- reg : shall contain base register location and length

>> +

>> +- #clock-cells : must be set to <0>

>> +

>> +Example:

>> +

>> +     a53pll: clock@b016000 {

>> +             compatible = "qcom,msm8916-a53pll";

>> +             reg = <0xb016000 0x40>;

>> +             #clock-cells = <0>;

>> +     };

>> +

>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig

>> index 9f6c278deead..057cf60ed037 100644

>> --- a/drivers/clk/qcom/Kconfig

>> +++ b/drivers/clk/qcom/Kconfig

>> @@ -12,6 +12,15 @@ config COMMON_CLK_QCOM

>>       select REGMAP_MMIO

>>       select RESET_CONTROLLER

>>

>> +config QCOM_A53PLL

>> +     bool "A53 PLL"

>

> Figuring out config options needed for a specific QC SoC is "fun". If

> this is only for MSM8916, then add that to the config option or prompt

> text at least.


> And please update the arm64 defconfig with this option.


Maybe instead of updating defconfig set:

        default ARCH_QCOM

I think the effect is roughly same but it makes the life of
distribution maintainers easier.

>> +     depends on COMMON_CLK_QCOM

>> +     help

>> +       Support for the A53 PLL on Qualcomm MSM8916 devices. It provides

>> +       support for CPU frequencies above 1GHz.

>> +       Say Y if you want to support CPU frequency scaling on devices

>> +       such as MSM8916.

> --

> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in

> the body of a message to majordomo@vger.kernel.org

> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.txt b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
new file mode 100644
index 000000000000..f4c2fddf6e7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
@@ -0,0 +1,22 @@ 
+MSM8916 A53 PLL Binding
+---------------
+The A53 PLL on MSM8916 platforms is the main CPU PLL used used for frequencies
+above 1GHz.
+
+Required properties :
+- compatible : Shall contain only one of the following:
+
+		"qcom,msm8916-a53pll"
+
+- reg : shall contain base register location and length
+
+- #clock-cells : must be set to <0>
+
+Example:
+
+	a53pll: clock@b016000 {
+		compatible = "qcom,msm8916-a53pll";
+		reg = <0xb016000 0x40>;
+		#clock-cells = <0>;
+	};
+
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 9f6c278deead..057cf60ed037 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -12,6 +12,15 @@  config COMMON_CLK_QCOM
 	select REGMAP_MMIO
 	select RESET_CONTROLLER
 
+config QCOM_A53PLL
+	bool "A53 PLL"
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the A53 PLL on Qualcomm MSM8916 devices. It provides
+	  support for CPU frequencies above 1GHz.
+	  Say Y if you want to support CPU frequency scaling on devices
+	  such as MSM8916.
+
 config QCOM_CLK_RPM
 	tristate "RPM based Clock Controller"
 	depends on COMMON_CLK_QCOM && MFD_QCOM_RPM
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 3f3aff229fb7..19ae884b5166 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -31,5 +31,6 @@  obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o
 obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
 obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
 obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
+obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
 obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
 obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c
new file mode 100644
index 000000000000..e039937e89fc
--- /dev/null
+++ b/drivers/clk/qcom/a53-pll.c
@@ -0,0 +1,94 @@ 
+/*
+ * Copyright (c) 2017, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "clk-pll.h"
+#include "clk-regmap.h"
+
+static const struct pll_freq_tbl a53pll_freq[] = {
+	{  998400000, 52, 0x0, 0x1, 0 },
+	{ 1094400000, 57, 0x0, 0x1, 0 },
+	{ 1152000000, 62, 0x0, 0x1, 0 },
+	{ 1209600000, 65, 0x0, 0x1, 0 },
+	{ 1401600000, 73, 0x0, 0x1, 0 },
+};
+
+static const struct regmap_config a53pll_regmap_config = {
+	.reg_bits		= 32,
+	.reg_stride		= 4,
+	.val_bits		= 32,
+	.max_register		= 0x40,
+	.fast_io		= true,
+	.val_format_endian	= REGMAP_ENDIAN_LITTLE,
+};
+
+static const struct of_device_id qcom_a53pll_match_table[] = {
+	{ .compatible = "qcom,msm8916-a53pll" },
+	{ }
+};
+
+static int qcom_a53pll_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_pll *pll;
+	struct resource *res;
+	void __iomem *base;
+	struct regmap *regmap;
+	struct clk_init_data init = { };
+
+	pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, &a53pll_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	pll->l_reg = 0x04;
+	pll->m_reg = 0x08;
+	pll->n_reg = 0x0c;
+	pll->config_reg = 0x14;
+	pll->mode_reg = 0x00;
+	pll->status_reg = 0x1c;
+	pll->status_bit = 16;
+	pll->freq_tbl = a53pll_freq;
+
+	init.name = "a53pll";
+	init.parent_names = (const char *[]){ "xo" };
+	init.num_parents = 1;
+	init.ops = &clk_pll_sr2_ops;
+	init.flags = CLK_IS_CRITICAL;
+	pll->clkr.hw.init = &init;
+
+	return devm_clk_register_regmap(dev, &pll->clkr);
+}
+
+static struct platform_driver qcom_a53pll_driver = {
+	.probe = qcom_a53pll_probe,
+	.driver = {
+		.name = "qcom-a53pll",
+		.of_match_table = qcom_a53pll_match_table,
+	},
+};
+
+builtin_platform_driver(qcom_a53pll_driver);