diff mbox series

[v3,4/6] clk: samsung: exynos-audss: Convert to the new clk_hw API

Message ID 1494831047-10235-1-git-send-email-m.szyprowski@samsung.com
State Accepted
Commit 5b2c3da14ce1e64f66070e426df697652364e16e
Headers show
Series None | expand

Commit Message

Marek Szyprowski May 15, 2017, 6:50 a.m. UTC
Clock providers should use the new struct clk_hw based API, so convert
Exynos Audio Subsystem clock provider to the new approach.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

---
Sylwester, if possible, please replace v2 with this fixed version in your tree,
as it has not been merged yet to clk-next nor to linux-next.

Changelog
v3:
- fixed clock data parameter passed to of_clk_add_hw_provider() - after conversion
  clk_data is a pointer, so passing it as &clk_data is wrong and causes serious issues

---
 drivers/clk/samsung/clk-exynos-audss.c | 57 +++++++++++++++++-----------------
 1 file changed, 29 insertions(+), 28 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Chanwoo Choi June 9, 2017, 1:33 a.m. UTC | #1
Dear Marek,

I tested this patch[1] which was applied on Sylwester's git repo. 
[1] https://git.linuxtv.org/snawrocki/samsung.git/commit/?h=for-v4.13/clk/next&id=6622c52f47372186c17548ca7398c229c45e6215

When I tested it on XU3, I can't get the kernel booting.

[Following log]
U-Boot 2016.03-gc2deb3a51-TIZEN.org (Oct 28 2016 - 18:00:23 +0000) for ODROID-XU3

CPU:   Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type:  xu3
DRAM:  2 GiB
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0 
reading exynos5422-odroidxu3.dtb
56532 bytes read in 16 ms (3.4 MiB/s)
reading uInitrd
** Unable to read file uInitrd **
reading zImage
7676176 bytes read in 208 ms (35.2 MiB/s)
Kernel image @ 0x40007fc0 [ 0x000000 - 0x752110 ]
## Flattened Device Tree blob at 40800000
   Booting using the fdt blob at 0x40800000
   Loading Device Tree to 4ffef000, end 4ffffcd3 ... OK

Starting kernel ...




On 2017년 05월 15일 15:50, Marek Szyprowski wrote:
> Clock providers should use the new struct clk_hw based API, so convert

> Exynos Audio Subsystem clock provider to the new approach.

> 

> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

> ---

> Sylwester, if possible, please replace v2 with this fixed version in your tree,

> as it has not been merged yet to clk-next nor to linux-next.

> 

> Changelog

> v3:

> - fixed clock data parameter passed to of_clk_add_hw_provider() - after conversion

>   clk_data is a pointer, so passing it as &clk_data is wrong and causes serious issues

> 

> ---

>  drivers/clk/samsung/clk-exynos-audss.c | 57 +++++++++++++++++-----------------

>  1 file changed, 29 insertions(+), 28 deletions(-)

> 

> diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c

> index cb7df358a27d..85edeb738853 100644

> --- a/drivers/clk/samsung/clk-exynos-audss.c

> +++ b/drivers/clk/samsung/clk-exynos-audss.c

> @@ -22,9 +22,8 @@

>  #include <dt-bindings/clock/exynos-audss-clk.h>

>  

>  static DEFINE_SPINLOCK(lock);

> -static struct clk **clk_table;

>  static void __iomem *reg_base;

> -static struct clk_onecell_data clk_data;

> +static struct clk_hw_onecell_data *clk_data;

>  /*

>   * On Exynos5420 this will be a clock which has to be enabled before any

>   * access to audss registers. Typically a child of EPLL.

> @@ -110,18 +109,18 @@ static void exynos_audss_clk_teardown(void)

>  	int i;

>  

>  	for (i = EXYNOS_MOUT_AUDSS; i < EXYNOS_DOUT_SRP; i++) {

> -		if (!IS_ERR(clk_table[i]))

> -			clk_unregister_mux(clk_table[i]);

> +		if (!IS_ERR(clk_data->hws[i]))

> +			clk_hw_unregister_mux(clk_data->hws[i]);

>  	}

>  

>  	for (; i < EXYNOS_SRP_CLK; i++) {

> -		if (!IS_ERR(clk_table[i]))

> -			clk_unregister_divider(clk_table[i]);

> +		if (!IS_ERR(clk_data->hws[i]))

> +			clk_hw_unregister_divider(clk_data->hws[i]);

>  	}

>  

> -	for (; i < clk_data.clk_num; i++) {

> -		if (!IS_ERR(clk_table[i]))

> -			clk_unregister_gate(clk_table[i]);

> +	for (; i < clk_data->num; i++) {

> +		if (!IS_ERR(clk_data->hws[i]))

> +			clk_hw_unregister_gate(clk_data->hws[i]);

>  	}

>  }

>  

> @@ -133,6 +132,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)

>  	const char *sclk_pcm_p = "sclk_pcm0";

>  	struct clk *pll_ref, *pll_in, *cdclk, *sclk_audio, *sclk_pcm_in;

>  	const struct exynos_audss_clk_drvdata *variant;

> +	struct clk_hw **clk_table;

>  	struct resource *res;

>  	int i, ret = 0;

>  

> @@ -149,14 +149,15 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)

>  

>  	epll = ERR_PTR(-ENODEV);

>  

> -	clk_table = devm_kzalloc(&pdev->dev,

> -				sizeof(struct clk *) * EXYNOS_AUDSS_MAX_CLKS,

> +	clk_data = devm_kzalloc(&pdev->dev,

> +				sizeof(*clk_data) +

> +				sizeof(*clk_data->hws) * EXYNOS_AUDSS_MAX_CLKS,

>  				GFP_KERNEL);

> -	if (!clk_table)

> +	if (!clk_data)

>  		return -ENOMEM;

>  

> -	clk_data.clks = clk_table;

> -	clk_data.clk_num = variant->num_clks;

> +	clk_data->num = variant->num_clks;

> +	clk_table = clk_data->hws;

>  

>  	pll_ref = devm_clk_get(&pdev->dev, "pll_ref");

>  	pll_in = devm_clk_get(&pdev->dev, "pll_in");

> @@ -176,7 +177,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)

>  			}

>  		}

>  	}

> -	clk_table[EXYNOS_MOUT_AUDSS] = clk_register_mux(NULL, "mout_audss",

> +	clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(NULL, "mout_audss",

>  				mout_audss_p, ARRAY_SIZE(mout_audss_p),

>  				CLK_SET_RATE_NO_REPARENT,

>  				reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);

> @@ -187,53 +188,53 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)

>  		mout_i2s_p[1] = __clk_get_name(cdclk);

>  	if (!IS_ERR(sclk_audio))

>  		mout_i2s_p[2] = __clk_get_name(sclk_audio);

> -	clk_table[EXYNOS_MOUT_I2S] = clk_register_mux(NULL, "mout_i2s",

> +	clk_table[EXYNOS_MOUT_I2S] = clk_hw_register_mux(NULL, "mout_i2s",

>  				mout_i2s_p, ARRAY_SIZE(mout_i2s_p),

>  				CLK_SET_RATE_NO_REPARENT,

>  				reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);

>  

> -	clk_table[EXYNOS_DOUT_SRP] = clk_register_divider(NULL, "dout_srp",

> +	clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(NULL, "dout_srp",

>  				"mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,

>  				0, &lock);

>  

> -	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_register_divider(NULL,

> +	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(NULL,

>  				"dout_aud_bus", "dout_srp", 0,

>  				reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);

>  

> -	clk_table[EXYNOS_DOUT_I2S] = clk_register_divider(NULL, "dout_i2s",

> +	clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(NULL, "dout_i2s",

>  				"mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0,

>  				&lock);

>  

> -	clk_table[EXYNOS_SRP_CLK] = clk_register_gate(NULL, "srp_clk",

> +	clk_table[EXYNOS_SRP_CLK] = clk_hw_register_gate(NULL, "srp_clk",

>  				"dout_srp", CLK_SET_RATE_PARENT,

>  				reg_base + ASS_CLK_GATE, 0, 0, &lock);

>  

> -	clk_table[EXYNOS_I2S_BUS] = clk_register_gate(NULL, "i2s_bus",

> +	clk_table[EXYNOS_I2S_BUS] = clk_hw_register_gate(NULL, "i2s_bus",

>  				"dout_aud_bus", CLK_SET_RATE_PARENT,

>  				reg_base + ASS_CLK_GATE, 2, 0, &lock);

>  

> -	clk_table[EXYNOS_SCLK_I2S] = clk_register_gate(NULL, "sclk_i2s",

> +	clk_table[EXYNOS_SCLK_I2S] = clk_hw_register_gate(NULL, "sclk_i2s",

>  				"dout_i2s", CLK_SET_RATE_PARENT,

>  				reg_base + ASS_CLK_GATE, 3, 0, &lock);

>  

> -	clk_table[EXYNOS_PCM_BUS] = clk_register_gate(NULL, "pcm_bus",

> +	clk_table[EXYNOS_PCM_BUS] = clk_hw_register_gate(NULL, "pcm_bus",

>  				 "sclk_pcm", CLK_SET_RATE_PARENT,

>  				reg_base + ASS_CLK_GATE, 4, 0, &lock);

>  

>  	sclk_pcm_in = devm_clk_get(&pdev->dev, "sclk_pcm_in");

>  	if (!IS_ERR(sclk_pcm_in))

>  		sclk_pcm_p = __clk_get_name(sclk_pcm_in);

> -	clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm",

> +	clk_table[EXYNOS_SCLK_PCM] = clk_hw_register_gate(NULL, "sclk_pcm",

>  				sclk_pcm_p, CLK_SET_RATE_PARENT,

>  				reg_base + ASS_CLK_GATE, 5, 0, &lock);

>  

>  	if (variant->has_adma_clk) {

> -		clk_table[EXYNOS_ADMA] = clk_register_gate(NULL, "adma",

> +		clk_table[EXYNOS_ADMA] = clk_hw_register_gate(NULL, "adma",

>  				"dout_srp", CLK_SET_RATE_PARENT,

>  				reg_base + ASS_CLK_GATE, 9, 0, &lock);

>  	}

>  

> -	for (i = 0; i < clk_data.clk_num; i++) {

> +	for (i = 0; i < clk_data->num; i++) {

>  		if (IS_ERR(clk_table[i])) {

>  			dev_err(&pdev->dev, "failed to register clock %d\n", i);

>  			ret = PTR_ERR(clk_table[i]);

> @@ -241,8 +242,8 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)

>  		}

>  	}

>  

> -	ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,

> -					&clk_data);

> +	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,

> +				     clk_data);

>  	if (ret) {

>  		dev_err(&pdev->dev, "failed to add clock provider\n");

>  		goto unregister;

> 



-- 
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Hi Chanwoo,

On 06/09/2017 03:33 AM, Chanwoo Choi wrote:
> I tested this patch[1] which was applied on Sylwester's git repo.

> [1]https://git.linuxtv.org/snawrocki/samsung.git/commit/?h=for-v4.13/clk/next&id=6622c52f47372186c17548ca7398c229c45e6215

> 

> When I tested it on XU3, I can't get the kernel booting.


Thanks for checking this, it seems I didn't appply v3 patches from Marek.
I corrected this now and tested on Odroid-XU3. The right patches should
be now in the for-v4.13/clk/next branch.

-- 
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
index cb7df358a27d..85edeb738853 100644
--- a/drivers/clk/samsung/clk-exynos-audss.c
+++ b/drivers/clk/samsung/clk-exynos-audss.c
@@ -22,9 +22,8 @@ 
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
 static DEFINE_SPINLOCK(lock);
-static struct clk **clk_table;
 static void __iomem *reg_base;
-static struct clk_onecell_data clk_data;
+static struct clk_hw_onecell_data *clk_data;
 /*
  * On Exynos5420 this will be a clock which has to be enabled before any
  * access to audss registers. Typically a child of EPLL.
@@ -110,18 +109,18 @@  static void exynos_audss_clk_teardown(void)
 	int i;
 
 	for (i = EXYNOS_MOUT_AUDSS; i < EXYNOS_DOUT_SRP; i++) {
-		if (!IS_ERR(clk_table[i]))
-			clk_unregister_mux(clk_table[i]);
+		if (!IS_ERR(clk_data->hws[i]))
+			clk_hw_unregister_mux(clk_data->hws[i]);
 	}
 
 	for (; i < EXYNOS_SRP_CLK; i++) {
-		if (!IS_ERR(clk_table[i]))
-			clk_unregister_divider(clk_table[i]);
+		if (!IS_ERR(clk_data->hws[i]))
+			clk_hw_unregister_divider(clk_data->hws[i]);
 	}
 
-	for (; i < clk_data.clk_num; i++) {
-		if (!IS_ERR(clk_table[i]))
-			clk_unregister_gate(clk_table[i]);
+	for (; i < clk_data->num; i++) {
+		if (!IS_ERR(clk_data->hws[i]))
+			clk_hw_unregister_gate(clk_data->hws[i]);
 	}
 }
 
@@ -133,6 +132,7 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 	const char *sclk_pcm_p = "sclk_pcm0";
 	struct clk *pll_ref, *pll_in, *cdclk, *sclk_audio, *sclk_pcm_in;
 	const struct exynos_audss_clk_drvdata *variant;
+	struct clk_hw **clk_table;
 	struct resource *res;
 	int i, ret = 0;
 
@@ -149,14 +149,15 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 
 	epll = ERR_PTR(-ENODEV);
 
-	clk_table = devm_kzalloc(&pdev->dev,
-				sizeof(struct clk *) * EXYNOS_AUDSS_MAX_CLKS,
+	clk_data = devm_kzalloc(&pdev->dev,
+				sizeof(*clk_data) +
+				sizeof(*clk_data->hws) * EXYNOS_AUDSS_MAX_CLKS,
 				GFP_KERNEL);
-	if (!clk_table)
+	if (!clk_data)
 		return -ENOMEM;
 
-	clk_data.clks = clk_table;
-	clk_data.clk_num = variant->num_clks;
+	clk_data->num = variant->num_clks;
+	clk_table = clk_data->hws;
 
 	pll_ref = devm_clk_get(&pdev->dev, "pll_ref");
 	pll_in = devm_clk_get(&pdev->dev, "pll_in");
@@ -176,7 +177,7 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 			}
 		}
 	}
-	clk_table[EXYNOS_MOUT_AUDSS] = clk_register_mux(NULL, "mout_audss",
+	clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(NULL, "mout_audss",
 				mout_audss_p, ARRAY_SIZE(mout_audss_p),
 				CLK_SET_RATE_NO_REPARENT,
 				reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
@@ -187,53 +188,53 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 		mout_i2s_p[1] = __clk_get_name(cdclk);
 	if (!IS_ERR(sclk_audio))
 		mout_i2s_p[2] = __clk_get_name(sclk_audio);
-	clk_table[EXYNOS_MOUT_I2S] = clk_register_mux(NULL, "mout_i2s",
+	clk_table[EXYNOS_MOUT_I2S] = clk_hw_register_mux(NULL, "mout_i2s",
 				mout_i2s_p, ARRAY_SIZE(mout_i2s_p),
 				CLK_SET_RATE_NO_REPARENT,
 				reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
 
-	clk_table[EXYNOS_DOUT_SRP] = clk_register_divider(NULL, "dout_srp",
+	clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(NULL, "dout_srp",
 				"mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
 				0, &lock);
 
-	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_register_divider(NULL,
+	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(NULL,
 				"dout_aud_bus", "dout_srp", 0,
 				reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
 
-	clk_table[EXYNOS_DOUT_I2S] = clk_register_divider(NULL, "dout_i2s",
+	clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(NULL, "dout_i2s",
 				"mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0,
 				&lock);
 
-	clk_table[EXYNOS_SRP_CLK] = clk_register_gate(NULL, "srp_clk",
+	clk_table[EXYNOS_SRP_CLK] = clk_hw_register_gate(NULL, "srp_clk",
 				"dout_srp", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 0, 0, &lock);
 
-	clk_table[EXYNOS_I2S_BUS] = clk_register_gate(NULL, "i2s_bus",
+	clk_table[EXYNOS_I2S_BUS] = clk_hw_register_gate(NULL, "i2s_bus",
 				"dout_aud_bus", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 2, 0, &lock);
 
-	clk_table[EXYNOS_SCLK_I2S] = clk_register_gate(NULL, "sclk_i2s",
+	clk_table[EXYNOS_SCLK_I2S] = clk_hw_register_gate(NULL, "sclk_i2s",
 				"dout_i2s", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 3, 0, &lock);
 
-	clk_table[EXYNOS_PCM_BUS] = clk_register_gate(NULL, "pcm_bus",
+	clk_table[EXYNOS_PCM_BUS] = clk_hw_register_gate(NULL, "pcm_bus",
 				 "sclk_pcm", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 4, 0, &lock);
 
 	sclk_pcm_in = devm_clk_get(&pdev->dev, "sclk_pcm_in");
 	if (!IS_ERR(sclk_pcm_in))
 		sclk_pcm_p = __clk_get_name(sclk_pcm_in);
-	clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm",
+	clk_table[EXYNOS_SCLK_PCM] = clk_hw_register_gate(NULL, "sclk_pcm",
 				sclk_pcm_p, CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 5, 0, &lock);
 
 	if (variant->has_adma_clk) {
-		clk_table[EXYNOS_ADMA] = clk_register_gate(NULL, "adma",
+		clk_table[EXYNOS_ADMA] = clk_hw_register_gate(NULL, "adma",
 				"dout_srp", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 9, 0, &lock);
 	}
 
-	for (i = 0; i < clk_data.clk_num; i++) {
+	for (i = 0; i < clk_data->num; i++) {
 		if (IS_ERR(clk_table[i])) {
 			dev_err(&pdev->dev, "failed to register clock %d\n", i);
 			ret = PTR_ERR(clk_table[i]);
@@ -241,8 +242,8 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
-					&clk_data);
+	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+				     clk_data);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add clock provider\n");
 		goto unregister;