diff mbox

ARM: debug-ll: fix BCM63xx entry for multiplatform

Message ID 5641204.G6RtGs3Kji@wuerfel
State New
Headers show

Commit Message

Arnd Bergmann Jan. 18, 2016, 9:51 a.m. UTC 
During my randconfig build testing, I found that a kernel with
DEBUG_AT91_UART and ARCH_BCM_63XX fails to build:

arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]

It turns out that the DEBUG_UART_BCM63XX option is enabled whenever
the ARCH_BCM_63XX is, and that breaks multiplatform kernels because
we then end up using the UART address from BCM63XX rather than the
one we actually configured (if any).

This changes the BCM63XX options to only have one Kconfig option,
and only enable that if the user explicitly turns it on.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support")
Cc: stable@vger.kernel.org

Comments

Russell King - ARM Linux Jan. 18, 2016, 9:59 a.m. UTC | #1 
On Mon, Jan 18, 2016 at 10:51:00AM +0100, Arnd Bergmann wrote:
> During my randconfig build testing, I found that a kernel with

> DEBUG_AT91_UART and ARCH_BCM_63XX fails to build:

> 

> arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]


Why do we have files defining CONFIG_* symbols?  This is the real error
here - no source file should be defining this.

-- 
RMK's Patch system: http://www.arm.linux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
Arnd Bergmann Jan. 18, 2016, 10:42 a.m. UTC | #2 
On Monday 18 January 2016 09:59:19 Russell King - ARM Linux wrote:
> On Mon, Jan 18, 2016 at 10:51:00AM +0100, Arnd Bergmann wrote:

> > During my randconfig build testing, I found that a kernel with

> > DEBUG_AT91_UART and ARCH_BCM_63XX fails to build:

> > 

> > arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]

> 

> Why do we have files defining CONFIG_* symbols?  This is the real error

> here - no source file should be defining this.


I agree that we should change that too, I'll send a patch for it as well.

However, this just let me stumble on the problem, without AT91 getting this
wrong, I would not have noticed that bcm63xx breaks other platforms.
The AT91 thing is just confusing but otherwise harmless, and I wouldn't
mark that fix for stable.

	Arnd
Randy Dunlap Jan. 18, 2016, 5:41 p.m. UTC | #3 
On 01/18/16 01:51, Arnd Bergmann wrote:
> During my randconfig build testing, I found that a kernel with

> DEBUG_AT91_UART and ARCH_BCM_63XX fails to build:

> 

> arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]

> 

> It turns out that the DEBUG_UART_BCM63XX option is enabled whenever

> the ARCH_BCM_63XX is, and that breaks multiplatform kernels because

> we then end up using the UART address from BCM63XX rather than the

> one we actually configured (if any).

> 

> This changes the BCM63XX options to only have one Kconfig option,

> and only enable that if the user explicitly turns it on.

> 

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support")

> Cc: stable@vger.kernel.org

> 

> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug

> index c57cbb7e8179..4a2c6a3bc90a 100644

> --- a/arch/arm/Kconfig.debug

> +++ b/arch/arm/Kconfig.debug

> @@ -153,10 +153,10 @@ choice

>  		  mobile SoCs in the Kona family of chips (e.g. bcm28155,

>  		  bcm11351, etc...)

>  

> -	config DEBUG_BCM63XX

> +	config DEBUG_BCM63XX_UART

>  		bool "Kernel low-level debugging on BCM63XX UART"

>  		depends on ARCH_BCM_63XX

> -		select DEBUG_UART_BCM63XX

> +		help		  


What's with the empty help message (and lots of trailing whitespace)?

>  

>  	config DEBUG_BERLIN_UART

>  		bool "Marvell Berlin SoC Debug UART"



-- 
~Randy
Florian Fainelli Jan. 18, 2016, 7:07 p.m. UTC | #4 
Le 18/01/2016 01:51, Arnd Bergmann a écrit :
> During my randconfig build testing, I found that a kernel with

> DEBUG_AT91_UART and ARCH_BCM_63XX fails to build:

> 

> arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]

> 

> It turns out that the DEBUG_UART_BCM63XX option is enabled whenever

> the ARCH_BCM_63XX is, and that breaks multiplatform kernels because

> we then end up using the UART address from BCM63XX rather than the

> one we actually configured (if any).

> 

> This changes the BCM63XX options to only have one Kconfig option,

> and only enable that if the user explicitly turns it on.

> 

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support")

> Cc: stable@vger.kernel.org


Acked-by: Florian Fainelli <f.fainelli@gmail.com>


Thanks for spotting this.
-- 
Florian
Arnd Bergmann Jan. 18, 2016, 7:38 p.m. UTC | #5 
On Monday 18 January 2016 09:41:17 Randy Dunlap wrote:
> On 01/18/16 01:51, Arnd Bergmann wrote:

> > During my randconfig build testing, I found that a kernel with

> > DEBUG_AT91_UART and ARCH_BCM_63XX fails to build:

> > 

> > arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]

> > 

> > It turns out that the DEBUG_UART_BCM63XX option is enabled whenever

> > the ARCH_BCM_63XX is, and that breaks multiplatform kernels because

> > we then end up using the UART address from BCM63XX rather than the

> > one we actually configured (if any).

> > 

> > This changes the BCM63XX options to only have one Kconfig option,

> > and only enable that if the user explicitly turns it on.

> > 

> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> > Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support")

> > Cc: stable@vger.kernel.org

> > 

> > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug

> > index c57cbb7e8179..4a2c6a3bc90a 100644

> > --- a/arch/arm/Kconfig.debug

> > +++ b/arch/arm/Kconfig.debug

> > @@ -153,10 +153,10 @@ choice

> >                 mobile SoCs in the Kona family of chips (e.g. bcm28155,

> >                 bcm11351, etc...)

> >  

> > -     config DEBUG_BCM63XX

> > +     config DEBUG_BCM63XX_UART

> >               bool "Kernel low-level debugging on BCM63XX UART"

> >               depends on ARCH_BCM_63XX

> > -             select DEBUG_UART_BCM63XX

> > +             help              

> 

> What's with the empty help message (and lots of trailing whitespace)?

> 

> 


Sorry about that. I was planning to add some text at first and then
saw that most others didn't have one either in this list, so I dropped
it again.

Curiously, the empty help text actually caused some serious problems
later on in my build testing, so this patch creates a regression unless
I remove that line again (as I should anyway).

Thanks for spotting this as well!

	Arnd
diff mbox

Patch

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c57cbb7e8179..4a2c6a3bc90a 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -153,10 +153,10 @@  choice
 		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 		  bcm11351, etc...)
 
-	config DEBUG_BCM63XX
+	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
 		depends on ARCH_BCM_63XX
-		select DEBUG_UART_BCM63XX
+		help		  
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -1414,7 +1414,7 @@  config DEBUG_LL_INCLUDE
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "mach/debug-macro.S"
 
@@ -1428,10 +1428,6 @@  config DEBUG_UART_8250
 		ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \
 		ARCH_RPC
 
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
-	def_bool ARCH_BCM_63XX
-
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
 	default 0x00100a00 if DEBUG_NETX_UART
@@ -1529,7 +1525,7 @@  config DEBUG_UART_PHYS
 	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
 	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
 	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xfffe8600 if DEBUG_UART_BCM63XX
+	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xfffff700 if ARCH_IOP33X
 	default 0
 	depends on ARCH_EP93XX || \
@@ -1543,7 +1539,7 @@  config DEBUG_UART_PHYS
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
 		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART
 
@@ -1589,7 +1585,7 @@  config DEBUG_UART_VIRT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
 	default 0xfc705000 if DEBUG_ZTE_ZX
-	default 0xfcfe8600 if DEBUG_UART_BCM63XX
+	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfe017000 if DEBUG_MMP_UART2
@@ -1637,7 +1633,7 @@  config DEBUG_UART_VIRT
 		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
 
 config DEBUG_UART_8250_SHIFT