| Message ID | 20170214203202.13342-5-maxim.uvarov@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | various travis updates | expand |
On 14 February 2017 at 15:32, Maxim Uvarov <maxim.uvarov@linaro.org> wrote: > Github may allow administrators in Linaro github group post > codecov from their local repositories. That happens if > same token is used for personal git and Linaro group. There is > one small side affect that history of tests fill web page of > Linaro official project. To make history more clean post codecov > results only for main repo. > > Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> > I am not yet convinced that this is needed, some simple tests I have done where I replace the Hash for the main ODP to which I am also admin with my private codcov hash have not resulted in the upstream repo getting touched > --- > .travis.yml | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/.travis.yml b/.travis.yml > index 1ab943fe..ef9c3283 100644 > --- a/.travis.yml > +++ b/.travis.yml > @@ -133,7 +133,7 @@ script: > - sudo rm -rf $KSRC > > after_success: > - - if [ -n "$DOCOV" ]; then find . -type f -iname '*.[ch]' -not -path > ".git/*" -execdir gcov {} \; ; bash <(curl -s https://codecov.io/bash) -X > coveragepy; fi > + - if [ -n "$DOCOV" ] && [ "$TRAVIS_REPO_SLUG" = "Linaro/odp" ]; then > find . -type f -iname '*.[ch]' -not -path ".git/*" -execdir gcov {} \; ; > bash <(curl -s https://codecov.io/bash) -X coveragepy; fi > > addons: > coverity_scan: > -- > 2.11.0.295.gd7dffce > > -- Mike Holmes Program Manager - Linaro Networking Group Linaro.org <http://www.linaro.org/> *│ *Open source software for ARM SoCs "Work should be fun and collaborative, the rest follows"
On 02/16/17 19:11, Mike Holmes wrote: > > > On 14 February 2017 at 15:32, Maxim Uvarov <maxim.uvarov@linaro.org > <mailto:maxim.uvarov@linaro.org>> wrote: > > Github may allow administrators in Linaro github group post > codecov from their local repositories. That happens if > same token is used for personal git and Linaro group. There is > one small side affect that history of tests fill web page of > Linaro official project. To make history more clean post codecov > results only for main repo. > > Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org > <mailto:maxim.uvarov@linaro.org>> > > > I am not yet convinced that this is needed, some simple tests I have > done where I replace the Hash for the main ODP to which I am also admin > with my private codcov hash have not resulted in the upstream repo > getting touched > Codecov needed to be run on each commit and pull request in main repo. Do you have other idea how to do it? Maxim. > > --- > .travis.yml | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/.travis.yml b/.travis.yml > index 1ab943fe..ef9c3283 100644 > --- a/.travis.yml > +++ b/.travis.yml > @@ -133,7 +133,7 @@ script: > - sudo rm -rf $KSRC > > after_success: > - - if [ -n "$DOCOV" ]; then find . -type f -iname '*.[ch]' -not > -path ".git/*" -execdir gcov {} \; ; bash <(curl -s > https://codecov.io/bash) -X coveragepy; fi > + - if [ -n "$DOCOV" ] && [ "$TRAVIS_REPO_SLUG" = "Linaro/odp" ]; > then find . -type f -iname '*.[ch]' -not -path ".git/*" -execdir > gcov {} \; ; bash <(curl -s https://codecov.io/bash) -X coveragepy; fi > > addons: > coverity_scan: > -- > 2.11.0.295.gd7dffce > > > > > -- > Mike Holmes > Program Manager - Linaro Networking Group > Linaro.org <http://www.linaro.org/>* **│ *Open source software for ARM SoCs > "Work should be fun and collaborative, the rest follows" > > __ > >
On 16 February 2017 at 14:11, Maxim Uvarov <maxim.uvarov@linaro.org> wrote: > On 02/16/17 19:11, Mike Holmes wrote: > > > > > > On 14 February 2017 at 15:32, Maxim Uvarov <maxim.uvarov@linaro.org > > <mailto:maxim.uvarov@linaro.org>> wrote: > > > > Github may allow administrators in Linaro github group post > > codecov from their local repositories. That happens if > > same token is used for personal git and Linaro group. There is > > one small side affect that history of tests fill web page of > > Linaro official project. To make history more clean post codecov > > results only for main repo. > > > > Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org > > <mailto:maxim.uvarov@linaro.org>> > > > > > > I am not yet convinced that this is needed, some simple tests I have > > done where I replace the Hash for the main ODP to which I am also admin > > with my private codcov hash have not resulted in the upstream repo > > getting touched > > > > Codecov needed to be run on each commit and pull request in main repo. > Do you have other idea how to do it? > I might be miss understand the problem you are solving, lets sync on a HO and check, it will be easier than a mail description > Maxim. > > > > > --- > > .travis.yml | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/.travis.yml b/.travis.yml > > index 1ab943fe..ef9c3283 100644 > > --- a/.travis.yml > > +++ b/.travis.yml > > @@ -133,7 +133,7 @@ script: > > - sudo rm -rf $KSRC > > > > after_success: > > - - if [ -n "$DOCOV" ]; then find . -type f -iname '*.[ch]' -not > > -path ".git/*" -execdir gcov {} \; ; bash <(curl -s > > https://codecov.io/bash) -X coveragepy; fi > > + - if [ -n "$DOCOV" ] && [ "$TRAVIS_REPO_SLUG" = "Linaro/odp" ]; > > then find . -type f -iname '*.[ch]' -not -path ".git/*" -execdir > > gcov {} \; ; bash <(curl -s https://codecov.io/bash) -X coveragepy; > fi > > > > addons: > > coverity_scan: > > -- > > 2.11.0.295.gd7dffce > > > > > > > > > > -- > > Mike Holmes > > Program Manager - Linaro Networking Group > > Linaro.org <http://www.linaro.org/>* **│ *Open source software for ARM > SoCs > > "Work should be fun and collaborative, the rest follows" > > > > __ > > > > > > -- Mike Holmes Program Manager - Linaro Networking Group Linaro.org <http://www.linaro.org/> *│ *Open source software for ARM SoCs "Work should be fun and collaborative, the rest follows"
diff --git a/.travis.yml b/.travis.yml index 1ab943fe..ef9c3283 100644 --- a/.travis.yml +++ b/.travis.yml @@ -133,7 +133,7 @@ script: - sudo rm -rf $KSRC after_success: - - if [ -n "$DOCOV" ]; then find . -type f -iname '*.[ch]' -not -path ".git/*" -execdir gcov {} \; ; bash <(curl -s https://codecov.io/bash) -X coveragepy; fi + - if [ -n "$DOCOV" ] && [ "$TRAVIS_REPO_SLUG" = "Linaro/odp" ]; then find . -type f -iname '*.[ch]' -not -path ".git/*" -execdir gcov {} \; ; bash <(curl -s https://codecov.io/bash) -X coveragepy; fi addons: coverity_scan:
Github may allow administrators in Linaro github group post codecov from their local repositories. That happens if same token is used for personal git and Linaro group. There is one small side affect that history of tests fill web page of Linaro official project. To make history more clean post codecov results only for main repo. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> --- .travis.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 2.11.0.295.gd7dffce