diff mbox series

[v2,1/5] drm: zte: add interlace mode support

Message ID 1485444053-8331-2-git-send-email-shawnguo@kernel.org
State New
Headers show
Series Add TV Encoder support for ZTE DRM driver | expand

Commit Message

Shawn Guo Jan. 26, 2017, 3:20 p.m. UTC 
From: Shawn Guo <shawn.guo@linaro.org>

It adds interlace mode support in VOU TIMING_CTRL and channel control
block, so that VOU driver gets ready to support output device in
interlace mode like TV Encoder.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
Changes for v2:
 - Save the use of variable 'vactive' by checking interlaced case.
 - Rename mask variable for scan register to avoid naming scope
   confusion.
 - Write a proper comment to explain how vback_porch of the first
   and second field are related.

 drivers/gpu/drm/zte/zx_vou.c      | 52 +++++++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/zte/zx_vou_regs.h | 15 +++++++++++
 2 files changed, 65 insertions(+), 2 deletions(-)

Comments

Sean Paul Jan. 26, 2017, 6:37 p.m. UTC | #1 
On Thu, Jan 26, 2017 at 11:20:49PM +0800, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo@linaro.org>
> 
> It adds interlace mode support in VOU TIMING_CTRL and channel control
> block, so that VOU driver gets ready to support output device in
> interlace mode like TV Encoder.
> 

Reviewed-by: Sean Paul <seanpaul@chromium.org>

> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> Changes for v2:
>  - Save the use of variable 'vactive' by checking interlaced case.
>  - Rename mask variable for scan register to avoid naming scope
>    confusion.
>  - Write a proper comment to explain how vback_porch of the first
>    and second field are related.
> 
>  drivers/gpu/drm/zte/zx_vou.c      | 52 +++++++++++++++++++++++++++++++++++++--
>  drivers/gpu/drm/zte/zx_vou_regs.h | 15 +++++++++++
>  2 files changed, 65 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/zte/zx_vou.c b/drivers/gpu/drm/zte/zx_vou.c
> index 3056b41df518..fe066e0f3df4 100644
> --- a/drivers/gpu/drm/zte/zx_vou.c
> +++ b/drivers/gpu/drm/zte/zx_vou.c
> @@ -40,6 +40,7 @@ struct zx_crtc_regs {
>  	u32 fir_active;
>  	u32 fir_htiming;
>  	u32 fir_vtiming;
> +	u32 sec_vtiming;
>  	u32 timing_shift;
>  	u32 timing_pi_shift;
>  };
> @@ -48,6 +49,7 @@ struct zx_crtc_regs {
>  	.fir_active = FIR_MAIN_ACTIVE,
>  	.fir_htiming = FIR_MAIN_H_TIMING,
>  	.fir_vtiming = FIR_MAIN_V_TIMING,
> +	.sec_vtiming = SEC_MAIN_V_TIMING,
>  	.timing_shift = TIMING_MAIN_SHIFT,
>  	.timing_pi_shift = TIMING_MAIN_PI_SHIFT,
>  };
> @@ -56,6 +58,7 @@ struct zx_crtc_regs {
>  	.fir_active = FIR_AUX_ACTIVE,
>  	.fir_htiming = FIR_AUX_H_TIMING,
>  	.fir_vtiming = FIR_AUX_V_TIMING,
> +	.sec_vtiming = SEC_AUX_V_TIMING,
>  	.timing_shift = TIMING_AUX_SHIFT,
>  	.timing_pi_shift = TIMING_AUX_PI_SHIFT,
>  };
> @@ -65,6 +68,10 @@ struct zx_crtc_bits {
>  	u32 polarity_shift;
>  	u32 int_frame_mask;
>  	u32 tc_enable;
> +	u32 sec_vactive_shift;
> +	u32 sec_vactive_mask;
> +	u32 interlace_select;
> +	u32 pi_enable;
>  };
>  
>  static const struct zx_crtc_bits main_crtc_bits = {
> @@ -72,6 +79,10 @@ struct zx_crtc_bits {
>  	.polarity_shift = MAIN_POL_SHIFT,
>  	.int_frame_mask = TIMING_INT_MAIN_FRAME,
>  	.tc_enable = MAIN_TC_EN,
> +	.sec_vactive_shift = SEC_VACT_MAIN_SHIFT,
> +	.sec_vactive_mask = SEC_VACT_MAIN_MASK,
> +	.interlace_select = MAIN_INTERLACE_SEL,
> +	.pi_enable = MAIN_PI_EN,
>  };
>  
>  static const struct zx_crtc_bits aux_crtc_bits = {
> @@ -79,6 +90,10 @@ struct zx_crtc_bits {
>  	.polarity_shift = AUX_POL_SHIFT,
>  	.int_frame_mask = TIMING_INT_AUX_FRAME,
>  	.tc_enable = AUX_TC_EN,
> +	.sec_vactive_shift = SEC_VACT_AUX_SHIFT,
> +	.sec_vactive_mask = SEC_VACT_AUX_MASK,
> +	.interlace_select = AUX_INTERLACE_SEL,
> +	.pi_enable = AUX_PI_EN,
>  };
>  
>  struct zx_crtc {
> @@ -196,11 +211,13 @@ static inline void vou_chn_set_update(struct zx_crtc *zcrtc)
>  static void zx_crtc_enable(struct drm_crtc *crtc)
>  {
>  	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
> +	bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
>  	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
>  	struct zx_vou_hw *vou = zcrtc->vou;
>  	const struct zx_crtc_regs *regs = zcrtc->regs;
>  	const struct zx_crtc_bits *bits = zcrtc->bits;
>  	struct videomode vm;
> +	u32 scan_mask;
>  	u32 pol = 0;
>  	u32 val;
>  	int ret;
> @@ -208,7 +225,7 @@ static void zx_crtc_enable(struct drm_crtc *crtc)
>  	drm_display_mode_to_videomode(mode, &vm);
>  
>  	/* Set up timing parameters */
> -	val = V_ACTIVE(vm.vactive - 1);
> +	val = V_ACTIVE((interlaced ? vm.vactive / 2 : vm.vactive) - 1);
>  	val |= H_ACTIVE(vm.hactive - 1);
>  	zx_writel(vou->timing + regs->fir_active, val);
>  
> @@ -222,6 +239,25 @@ static void zx_crtc_enable(struct drm_crtc *crtc)
>  	val |= FRONT_PORCH(vm.vfront_porch - 1);
>  	zx_writel(vou->timing + regs->fir_vtiming, val);
>  
> +	if (interlaced) {
> +		u32 shift = bits->sec_vactive_shift;
> +		u32 mask = bits->sec_vactive_mask;
> +
> +		val = zx_readl(vou->timing + SEC_V_ACTIVE);
> +		val &= ~mask;
> +		val |= ((vm.vactive / 2 - 1) << shift) & mask;
> +		zx_writel(vou->timing + SEC_V_ACTIVE, val);
> +
> +		val = SYNC_WIDE(vm.vsync_len - 1);
> +		/*
> +		 * The vback_porch for the second field needs to shift one on
> +		 * the value for the first field.
> +		 */
> +		val |= BACK_PORCH(vm.vback_porch);
> +		val |= FRONT_PORCH(vm.vfront_porch - 1);
> +		zx_writel(vou->timing + regs->sec_vtiming, val);
> +	}
> +
>  	/* Set up polarities */
>  	if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW)
>  		pol |= 1 << POL_VSYNC_SHIFT;
> @@ -232,9 +268,17 @@ static void zx_crtc_enable(struct drm_crtc *crtc)
>  		       pol << bits->polarity_shift);
>  
>  	/* Setup SHIFT register by following what ZTE BSP does */
> -	zx_writel(vou->timing + regs->timing_shift, H_SHIFT_VAL);
> +	val = H_SHIFT_VAL;
> +	if (interlaced)
> +		val |= V_SHIFT_VAL << 16;
> +	zx_writel(vou->timing + regs->timing_shift, val);
>  	zx_writel(vou->timing + regs->timing_pi_shift, H_PI_SHIFT_VAL);
>  
> +	/* Progressive or interlace scan select */
> +	scan_mask = bits->interlace_select | bits->pi_enable;
> +	zx_writel_mask(vou->timing + SCAN_CTRL, scan_mask,
> +		       interlaced ? scan_mask : 0);
> +
>  	/* Enable TIMING_CTRL */
>  	zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable,
>  		       bits->tc_enable);
> @@ -245,6 +289,10 @@ static void zx_crtc_enable(struct drm_crtc *crtc)
>  	zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_H_MASK,
>  		       vm.vactive << CHN_SCREEN_H_SHIFT);
>  
> +	/* Configure channel interlace buffer control */
> +	zx_writel_mask(zcrtc->chnreg + CHN_INTERLACE_BUF_CTRL, CHN_INTERLACE_EN,
> +		       interlaced ? CHN_INTERLACE_EN : 0);
> +
>  	/* Update channel */
>  	vou_chn_set_update(zcrtc);
>  
> diff --git a/drivers/gpu/drm/zte/zx_vou_regs.h b/drivers/gpu/drm/zte/zx_vou_regs.h
> index 193c1ce01fe7..e6ed844e068a 100644
> --- a/drivers/gpu/drm/zte/zx_vou_regs.h
> +++ b/drivers/gpu/drm/zte/zx_vou_regs.h
> @@ -75,6 +75,8 @@
>  #define CHN_SCREEN_H_SHIFT		5
>  #define CHN_SCREEN_H_MASK		(0x1fff << CHN_SCREEN_H_SHIFT)
>  #define CHN_UPDATE			0x08
> +#define CHN_INTERLACE_BUF_CTRL		0x24
> +#define CHN_INTERLACE_EN		BIT(2)
>  
>  /* TIMING_CTRL registers */
>  #define TIMING_TC_ENABLE		0x04
> @@ -117,6 +119,19 @@
>  #define TIMING_MAIN_SHIFT		0x2c
>  #define TIMING_AUX_SHIFT		0x30
>  #define H_SHIFT_VAL			0x0048
> +#define V_SHIFT_VAL			0x0001
> +#define SCAN_CTRL			0x34
> +#define AUX_PI_EN			BIT(19)
> +#define MAIN_PI_EN			BIT(18)
> +#define AUX_INTERLACE_SEL		BIT(1)
> +#define MAIN_INTERLACE_SEL		BIT(0)
> +#define SEC_V_ACTIVE			0x38
> +#define SEC_VACT_MAIN_SHIFT		0
> +#define SEC_VACT_MAIN_MASK		(0xffff << SEC_VACT_MAIN_SHIFT)
> +#define SEC_VACT_AUX_SHIFT		16
> +#define SEC_VACT_AUX_MASK		(0xffff << SEC_VACT_AUX_SHIFT)
> +#define SEC_MAIN_V_TIMING		0x3c
> +#define SEC_AUX_V_TIMING		0x40
>  #define TIMING_MAIN_PI_SHIFT		0x68
>  #define TIMING_AUX_PI_SHIFT		0x6c
>  #define H_PI_SHIFT_VAL			0x000f
> -- 
> 1.9.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff mbox series

Patch

diff --git a/drivers/gpu/drm/zte/zx_vou.c b/drivers/gpu/drm/zte/zx_vou.c
index 3056b41df518..fe066e0f3df4 100644
--- a/drivers/gpu/drm/zte/zx_vou.c
+++ b/drivers/gpu/drm/zte/zx_vou.c
@@ -40,6 +40,7 @@  struct zx_crtc_regs {
 	u32 fir_active;
 	u32 fir_htiming;
 	u32 fir_vtiming;
+	u32 sec_vtiming;
 	u32 timing_shift;
 	u32 timing_pi_shift;
 };
@@ -48,6 +49,7 @@  struct zx_crtc_regs {
 	.fir_active = FIR_MAIN_ACTIVE,
 	.fir_htiming = FIR_MAIN_H_TIMING,
 	.fir_vtiming = FIR_MAIN_V_TIMING,
+	.sec_vtiming = SEC_MAIN_V_TIMING,
 	.timing_shift = TIMING_MAIN_SHIFT,
 	.timing_pi_shift = TIMING_MAIN_PI_SHIFT,
 };
@@ -56,6 +58,7 @@  struct zx_crtc_regs {
 	.fir_active = FIR_AUX_ACTIVE,
 	.fir_htiming = FIR_AUX_H_TIMING,
 	.fir_vtiming = FIR_AUX_V_TIMING,
+	.sec_vtiming = SEC_AUX_V_TIMING,
 	.timing_shift = TIMING_AUX_SHIFT,
 	.timing_pi_shift = TIMING_AUX_PI_SHIFT,
 };
@@ -65,6 +68,10 @@  struct zx_crtc_bits {
 	u32 polarity_shift;
 	u32 int_frame_mask;
 	u32 tc_enable;
+	u32 sec_vactive_shift;
+	u32 sec_vactive_mask;
+	u32 interlace_select;
+	u32 pi_enable;
 };
 
 static const struct zx_crtc_bits main_crtc_bits = {
@@ -72,6 +79,10 @@  struct zx_crtc_bits {
 	.polarity_shift = MAIN_POL_SHIFT,
 	.int_frame_mask = TIMING_INT_MAIN_FRAME,
 	.tc_enable = MAIN_TC_EN,
+	.sec_vactive_shift = SEC_VACT_MAIN_SHIFT,
+	.sec_vactive_mask = SEC_VACT_MAIN_MASK,
+	.interlace_select = MAIN_INTERLACE_SEL,
+	.pi_enable = MAIN_PI_EN,
 };
 
 static const struct zx_crtc_bits aux_crtc_bits = {
@@ -79,6 +90,10 @@  struct zx_crtc_bits {
 	.polarity_shift = AUX_POL_SHIFT,
 	.int_frame_mask = TIMING_INT_AUX_FRAME,
 	.tc_enable = AUX_TC_EN,
+	.sec_vactive_shift = SEC_VACT_AUX_SHIFT,
+	.sec_vactive_mask = SEC_VACT_AUX_MASK,
+	.interlace_select = AUX_INTERLACE_SEL,
+	.pi_enable = AUX_PI_EN,
 };
 
 struct zx_crtc {
@@ -196,11 +211,13 @@  static inline void vou_chn_set_update(struct zx_crtc *zcrtc)
 static void zx_crtc_enable(struct drm_crtc *crtc)
 {
 	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+	bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
 	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
 	struct zx_vou_hw *vou = zcrtc->vou;
 	const struct zx_crtc_regs *regs = zcrtc->regs;
 	const struct zx_crtc_bits *bits = zcrtc->bits;
 	struct videomode vm;
+	u32 scan_mask;
 	u32 pol = 0;
 	u32 val;
 	int ret;
@@ -208,7 +225,7 @@  static void zx_crtc_enable(struct drm_crtc *crtc)
 	drm_display_mode_to_videomode(mode, &vm);
 
 	/* Set up timing parameters */
-	val = V_ACTIVE(vm.vactive - 1);
+	val = V_ACTIVE((interlaced ? vm.vactive / 2 : vm.vactive) - 1);
 	val |= H_ACTIVE(vm.hactive - 1);
 	zx_writel(vou->timing + regs->fir_active, val);
 
@@ -222,6 +239,25 @@  static void zx_crtc_enable(struct drm_crtc *crtc)
 	val |= FRONT_PORCH(vm.vfront_porch - 1);
 	zx_writel(vou->timing + regs->fir_vtiming, val);
 
+	if (interlaced) {
+		u32 shift = bits->sec_vactive_shift;
+		u32 mask = bits->sec_vactive_mask;
+
+		val = zx_readl(vou->timing + SEC_V_ACTIVE);
+		val &= ~mask;
+		val |= ((vm.vactive / 2 - 1) << shift) & mask;
+		zx_writel(vou->timing + SEC_V_ACTIVE, val);
+
+		val = SYNC_WIDE(vm.vsync_len - 1);
+		/*
+		 * The vback_porch for the second field needs to shift one on
+		 * the value for the first field.
+		 */
+		val |= BACK_PORCH(vm.vback_porch);
+		val |= FRONT_PORCH(vm.vfront_porch - 1);
+		zx_writel(vou->timing + regs->sec_vtiming, val);
+	}
+
 	/* Set up polarities */
 	if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW)
 		pol |= 1 << POL_VSYNC_SHIFT;
@@ -232,9 +268,17 @@  static void zx_crtc_enable(struct drm_crtc *crtc)
 		       pol << bits->polarity_shift);
 
 	/* Setup SHIFT register by following what ZTE BSP does */
-	zx_writel(vou->timing + regs->timing_shift, H_SHIFT_VAL);
+	val = H_SHIFT_VAL;
+	if (interlaced)
+		val |= V_SHIFT_VAL << 16;
+	zx_writel(vou->timing + regs->timing_shift, val);
 	zx_writel(vou->timing + regs->timing_pi_shift, H_PI_SHIFT_VAL);
 
+	/* Progressive or interlace scan select */
+	scan_mask = bits->interlace_select | bits->pi_enable;
+	zx_writel_mask(vou->timing + SCAN_CTRL, scan_mask,
+		       interlaced ? scan_mask : 0);
+
 	/* Enable TIMING_CTRL */
 	zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable,
 		       bits->tc_enable);
@@ -245,6 +289,10 @@  static void zx_crtc_enable(struct drm_crtc *crtc)
 	zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_H_MASK,
 		       vm.vactive << CHN_SCREEN_H_SHIFT);
 
+	/* Configure channel interlace buffer control */
+	zx_writel_mask(zcrtc->chnreg + CHN_INTERLACE_BUF_CTRL, CHN_INTERLACE_EN,
+		       interlaced ? CHN_INTERLACE_EN : 0);
+
 	/* Update channel */
 	vou_chn_set_update(zcrtc);
 
diff --git a/drivers/gpu/drm/zte/zx_vou_regs.h b/drivers/gpu/drm/zte/zx_vou_regs.h
index 193c1ce01fe7..e6ed844e068a 100644
--- a/drivers/gpu/drm/zte/zx_vou_regs.h
+++ b/drivers/gpu/drm/zte/zx_vou_regs.h
@@ -75,6 +75,8 @@ 
 #define CHN_SCREEN_H_SHIFT		5
 #define CHN_SCREEN_H_MASK		(0x1fff << CHN_SCREEN_H_SHIFT)
 #define CHN_UPDATE			0x08
+#define CHN_INTERLACE_BUF_CTRL		0x24
+#define CHN_INTERLACE_EN		BIT(2)
 
 /* TIMING_CTRL registers */
 #define TIMING_TC_ENABLE		0x04
@@ -117,6 +119,19 @@ 
 #define TIMING_MAIN_SHIFT		0x2c
 #define TIMING_AUX_SHIFT		0x30
 #define H_SHIFT_VAL			0x0048
+#define V_SHIFT_VAL			0x0001
+#define SCAN_CTRL			0x34
+#define AUX_PI_EN			BIT(19)
+#define MAIN_PI_EN			BIT(18)
+#define AUX_INTERLACE_SEL		BIT(1)
+#define MAIN_INTERLACE_SEL		BIT(0)
+#define SEC_V_ACTIVE			0x38
+#define SEC_VACT_MAIN_SHIFT		0
+#define SEC_VACT_MAIN_MASK		(0xffff << SEC_VACT_MAIN_SHIFT)
+#define SEC_VACT_AUX_SHIFT		16
+#define SEC_VACT_AUX_MASK		(0xffff << SEC_VACT_AUX_SHIFT)
+#define SEC_MAIN_V_TIMING		0x3c
+#define SEC_AUX_V_TIMING		0x40
 #define TIMING_MAIN_PI_SHIFT		0x68
 #define TIMING_AUX_PI_SHIFT		0x6c
 #define H_PI_SHIFT_VAL			0x000f