@@ -32,6 +32,29 @@ Optional properties:
- single-ulpi-bypass: Must be present if the controller contains a single
ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+ clock-names.
+
+- clock-names: should include:
+ For OMAP3
+ * "usbhost_120m_fck" - 120MHz Functional clock.
+
+ For OMAP4+
+ * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
+ * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
+ * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
+ * "utmi_p1_gfclk" - Port 1 UTMI clock mux.
+ * "utmi_p2_gfclk" - Port 2 UTMI clock mux.
+ * "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate.
+ * "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate.
+ * "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate.
+ * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
+ * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
+ * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
+ * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
+ * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
+ * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
+
Required properties if child node exists:
- #address-cells: Must be 1
@@ -713,21 +713,21 @@ static int usbhs_omap_probe(struct platform_device *pdev)
goto err_mem;
}
- omap->xclk60mhsp1_ck = devm_clk_get(dev, "xclk60mhsp1_ck");
+ omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
if (IS_ERR(omap->xclk60mhsp1_ck)) {
ret = PTR_ERR(omap->xclk60mhsp1_ck);
dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
goto err_mem;
}
- omap->xclk60mhsp2_ck = devm_clk_get(dev, "xclk60mhsp2_ck");
+ omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
if (IS_ERR(omap->xclk60mhsp2_ck)) {
ret = PTR_ERR(omap->xclk60mhsp2_ck);
dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
goto err_mem;
}
- omap->init_60m_fclk = devm_clk_get(dev, "init_60m_fclk");
+ omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
if (IS_ERR(omap->init_60m_fclk)) {
ret = PTR_ERR(omap->init_60m_fclk);
dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
The omap-usb-host driver expects certained named clocks. Add this information to the DT binding document. Use clock names as per function for reference clocks. CC: Lee Jones <lee.jones@linaro.org> CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Roger Quadros <rogerq@ti.com> --- .../devicetree/bindings/mfd/omap-usb-host.txt | 23 ++++++++++++++++++++++ drivers/mfd/omap-usb-host.c | 6 +++--- 2 files changed, 26 insertions(+), 3 deletions(-)