diff mbox

[2/3,v2] iio: adc: break out common code from SPMI VADC

Message ID 1481842105-14047-1-git-send-email-linus.walleij@linaro.org
State New
Headers show

Commit Message

Linus Walleij Dec. 15, 2016, 10:48 p.m. UTC
The SPMI VADC and the earlier XOADC share a subset of
common code, so to be able to use the same code in both
drivers, we break out a separate file with the common code,
prefix exported functions that are no longer static with
qcom_* and bake an object qcom-vadc.o that contains both
files: qcom-vadc-common.o and qcom-spmi-vadc.o.

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: Ivan T. Ivanov <iivanov.xz@gmail.com>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v1->v2:
- No changes just reposting
---
 drivers/iio/adc/Makefile           |  3 +-
 drivers/iio/adc/qcom-spmi-vadc.c   | 95 +++-----------------------------------
 drivers/iio/adc/qcom-vadc-common.c | 38 +++++++++++++++
 drivers/iio/adc/qcom-vadc-common.h | 69 +++++++++++++++++++++++++++
 4 files changed, 116 insertions(+), 89 deletions(-)
 create mode 100644 drivers/iio/adc/qcom-vadc-common.c
 create mode 100644 drivers/iio/adc/qcom-vadc-common.h

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Jonathan Cameron Dec. 30, 2016, 7:01 p.m. UTC | #1
On 15/12/16 22:48, Linus Walleij wrote:
> The SPMI VADC and the earlier XOADC share a subset of

> common code, so to be able to use the same code in both

> drivers, we break out a separate file with the common code,

> prefix exported functions that are no longer static with

> qcom_* and bake an object qcom-vadc.o that contains both

> files: qcom-vadc-common.o and qcom-spmi-vadc.o.

> 

> Cc: linux-arm-kernel@lists.infradead.org

> Cc: linux-arm-msm@vger.kernel.org

> Cc: Ivan T. Ivanov <iivanov.xz@gmail.com>

> Cc: Andy Gross <andy.gross@linaro.org>

> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>

> Cc: Stephen Boyd <sboyd@codeaurora.org>

> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Looks superficially fine, but I'm guessing will need a respin
as we have a fair bit of new stuff (and a couple of fixes) going
through this driver at the moment.

All but the two fixes I posted a few mins ago are in my testing
branch and should go to Greg once I have confirmed testing on
those two fixes.

Jonathan
> ---

> ChangeLog v1->v2:

> - No changes just reposting

> ---

>  drivers/iio/adc/Makefile           |  3 +-

>  drivers/iio/adc/qcom-spmi-vadc.c   | 95 +++-----------------------------------

>  drivers/iio/adc/qcom-vadc-common.c | 38 +++++++++++++++

>  drivers/iio/adc/qcom-vadc-common.h | 69 +++++++++++++++++++++++++++

>  4 files changed, 116 insertions(+), 89 deletions(-)

>  create mode 100644 drivers/iio/adc/qcom-vadc-common.c

>  create mode 100644 drivers/iio/adc/qcom-vadc-common.h

> 

> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile

> index 7a40c04c311f..f9468d228b1e 100644

> --- a/drivers/iio/adc/Makefile

> +++ b/drivers/iio/adc/Makefile

> @@ -38,7 +38,8 @@ obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o

>  obj-$(CONFIG_NAU7802) += nau7802.o

>  obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o

>  obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o

> -obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o

> +qcom-vadc-y := qcom-vadc-common.o

> +obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-vadc.o qcom-spmi-vadc.o

>  obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o

>  obj-$(CONFIG_STX104) += stx104.o

>  obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o

> diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c

> index c2babe50a0d8..74d21afa34a9 100644

> --- a/drivers/iio/adc/qcom-spmi-vadc.c

> +++ b/drivers/iio/adc/qcom-spmi-vadc.c

> @@ -28,6 +28,8 @@

>  

>  #include <dt-bindings/iio/qcom,spmi-vadc.h>

>  

> +#include "qcom-vadc-common.h"

> +

>  /* VADC register and bit definitions */

>  #define VADC_REVISION2				0x1

>  #define VADC_REVISION2_SUPPORTED_VADC		1

> @@ -75,69 +77,9 @@

>  

>  #define VADC_DATA				0x60	/* 16 bits */

>  

> -#define VADC_CONV_TIME_MIN_US			2000

> -#define VADC_CONV_TIME_MAX_US			2100

> -

> -/* Min ADC code represents 0V */

> -#define VADC_MIN_ADC_CODE			0x6000

> -/* Max ADC code represents full-scale range of 1.8V */

> -#define VADC_MAX_ADC_CODE			0xa800

> -

> -#define VADC_ABSOLUTE_RANGE_UV			625000

> -#define VADC_RATIOMETRIC_RANGE_UV		1800000

> -

> -#define VADC_DEF_PRESCALING			0 /* 1:1 */

> -#define VADC_DEF_DECIMATION			0 /* 512 */

> -#define VADC_DEF_HW_SETTLE_TIME			0 /* 0 us */

> -#define VADC_DEF_AVG_SAMPLES			0 /* 1 sample */

> -#define VADC_DEF_CALIB_TYPE			VADC_CALIB_ABSOLUTE

> -

> -#define VADC_DECIMATION_MIN			512

> -#define VADC_DECIMATION_MAX			4096

> -

> -#define VADC_HW_SETTLE_DELAY_MAX		10000

> -#define VADC_AVG_SAMPLES_MAX			512

> -

> -#define KELVINMIL_CELSIUSMIL			273150

> -

>  #define VADC_CHAN_MIN			VADC_USBIN

>  #define VADC_CHAN_MAX			VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM

>  

> -/*

> - * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.

> - * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for

> - * calibration.

> - */

> -enum vadc_calibration {

> -	VADC_CALIB_ABSOLUTE = 0,

> -	VADC_CALIB_RATIOMETRIC

> -};

> -

> -/**

> - * struct vadc_linear_graph - Represent ADC characteristics.

> - * @dy: numerator slope to calculate the gain.

> - * @dx: denominator slope to calculate the gain.

> - * @gnd: A/D word of the ground reference used for the channel.

> - *

> - * Each ADC device has different offset and gain parameters which are

> - * computed to calibrate the device.

> - */

> -struct vadc_linear_graph {

> -	s32 dy;

> -	s32 dx;

> -	s32 gnd;

> -};

> -

> -/**

> - * struct vadc_prescale_ratio - Represent scaling ratio for ADC input.

> - * @num: the inverse numerator of the gain applied to the input channel.

> - * @den: the inverse denominator of the gain applied to the input channel.

> - */

> -struct vadc_prescale_ratio {

> -	u32 num;

> -	u32 den;

> -};

> -

>  /**

>   * struct vadc_channel_prop - VADC channel property.

>   * @channel: channel number, refer to the channel list.

> @@ -471,33 +413,10 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)

>  static s32 vadc_calibrate(struct vadc_priv *vadc,

>  			  const struct vadc_channel_prop *prop, u16 adc_code)

>  {

> -	const struct vadc_prescale_ratio *prescale;

> -	s64 voltage;

> -

> -	voltage = adc_code - vadc->graph[prop->calibration].gnd;

> -	voltage *= vadc->graph[prop->calibration].dx;

> -	voltage = div64_s64(voltage, vadc->graph[prop->calibration].dy);

> -

> -	if (prop->calibration == VADC_CALIB_ABSOLUTE)

> -		voltage += vadc->graph[prop->calibration].dx;

> -

> -	if (voltage < 0)

> -		voltage = 0;

> -

> -	prescale = &vadc_prescale_ratios[prop->prescale];

> -

> -	voltage = voltage * prescale->den;

> -

> -	return div64_s64(voltage, prescale->num);

> -}

> -

> -static int vadc_decimation_from_dt(u32 value)

> -{

> -	if (!is_power_of_2(value) || value < VADC_DECIMATION_MIN ||

> -	    value > VADC_DECIMATION_MAX)

> -		return -EINVAL;

> -

> -	return __ffs64(value / VADC_DECIMATION_MIN);

> +	return qcom_vadc_calibrate(&vadc_prescale_ratios[prop->prescale],

> +				   &vadc->graph[prop->calibration],

> +				   (prop->calibration == VADC_CALIB_ABSOLUTE),

> +				   adc_code);

>  }

>  

>  static int vadc_prescaling_from_dt(u32 num, u32 den)

> @@ -752,7 +671,7 @@ static int vadc_get_dt_channel_data(struct device *dev,

>  

>  	ret = of_property_read_u32(node, "qcom,decimation", &value);

>  	if (!ret) {

> -		ret = vadc_decimation_from_dt(value);

> +		ret = qcom_vadc_decimation_from_dt(value);

>  		if (ret < 0) {

>  			dev_err(dev, "%02x invalid decimation %d\n",

>  				chan, value);

> diff --git a/drivers/iio/adc/qcom-vadc-common.c b/drivers/iio/adc/qcom-vadc-common.c

> new file mode 100644

> index 000000000000..f67fc5e2a702

> --- /dev/null

> +++ b/drivers/iio/adc/qcom-vadc-common.c

> @@ -0,0 +1,38 @@

> +#include <linux/kernel.h>

> +#include <linux/bitops.h>

> +#include <linux/math64.h>

> +#include <linux/log2.h>

> +#include <linux/err.h>

> +

> +#include "qcom-vadc-common.h"

> +

> +s32 qcom_vadc_calibrate(const struct vadc_prescale_ratio *prescale,

> +			const struct vadc_linear_graph *graph,

> +			bool absolute,

> +			u16 adc_code)

> +{

> +	s64 voltage;

> +

> +	voltage = adc_code - graph->gnd;

> +	voltage *= graph->dx;

> +	voltage = div64_s64(voltage, graph->dy);

> +

> +	if (absolute)

> +		voltage += graph->dx;

> +

> +	if (voltage < 0)

> +		voltage = 0;

> +

> +	voltage = voltage * prescale->den;

> +

> +	return div64_s64(voltage, prescale->num);

> +}

> +

> +int qcom_vadc_decimation_from_dt(u32 value)

> +{

> +	if (!is_power_of_2(value) || value < VADC_DECIMATION_MIN ||

> +	    value > VADC_DECIMATION_MAX)

> +		return -EINVAL;

> +

> +	return __ffs64(value / VADC_DECIMATION_MIN);

> +}

> diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h

> new file mode 100644

> index 000000000000..b41cb501eef8

> --- /dev/null

> +++ b/drivers/iio/adc/qcom-vadc-common.h

> @@ -0,0 +1,69 @@

> +/*

> + * Code shared between the different Qualcomm PMIC voltage ADCs

> + */

> +

> +#define VADC_CONV_TIME_MIN_US			2000

> +#define VADC_CONV_TIME_MAX_US			2100

> +

> +/* Min ADC code represents 0V */

> +#define VADC_MIN_ADC_CODE			0x6000

> +/* Max ADC code represents full-scale range of 1.8V */

> +#define VADC_MAX_ADC_CODE			0xa800

> +

> +#define VADC_ABSOLUTE_RANGE_UV			625000

> +#define VADC_RATIOMETRIC_RANGE_UV		1800000

> +

> +#define VADC_DEF_PRESCALING			0 /* 1:1 */

> +#define VADC_DEF_DECIMATION			0 /* 512 */

> +#define VADC_DEF_HW_SETTLE_TIME			0 /* 0 us */

> +#define VADC_DEF_AVG_SAMPLES			0 /* 1 sample */

> +#define VADC_DEF_CALIB_TYPE			VADC_CALIB_ABSOLUTE

> +

> +#define VADC_DECIMATION_MIN			512

> +#define VADC_DECIMATION_MAX			4096

> +

> +#define VADC_HW_SETTLE_DELAY_MAX		10000

> +#define VADC_AVG_SAMPLES_MAX			512

> +

> +#define KELVINMIL_CELSIUSMIL			273150

> +

> +/*

> + * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.

> + * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for

> + * calibration.

> + */

> +enum vadc_calibration {

> +	VADC_CALIB_ABSOLUTE = 0,

> +	VADC_CALIB_RATIOMETRIC

> +};

> +

> +/**

> + * struct vadc_linear_graph - Represent ADC characteristics.

> + * @dy: numerator slope to calculate the gain.

> + * @dx: denominator slope to calculate the gain.

> + * @gnd: A/D word of the ground reference used for the channel.

> + *

> + * Each ADC device has different offset and gain parameters which are

> + * computed to calibrate the device.

> + */

> +struct vadc_linear_graph {

> +	s32 dy;

> +	s32 dx;

> +	s32 gnd;

> +};

> +

> +/**

> + * struct vadc_prescale_ratio - Represent scaling ratio for ADC input.

> + * @num: the inverse numerator of the gain applied to the input channel.

> + * @den: the inverse denominator of the gain applied to the input channel.

> + */

> +struct vadc_prescale_ratio {

> +	u32 num;

> +	u32 den;

> +};

> +

> +s32 qcom_vadc_calibrate(const struct vadc_prescale_ratio *prescale,

> +			const struct vadc_linear_graph *graph,

> +			bool absolute,

> +			u16 adc_code);

> +int qcom_vadc_decimation_from_dt(u32 value);

> 


--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Linus Walleij Jan. 10, 2017, 8:54 a.m. UTC | #2
On Fri, Dec 30, 2016 at 8:01 PM, Jonathan Cameron <jic23@kernel.org> wrote:
> On 15/12/16 22:48, Linus Walleij wrote:

>> The SPMI VADC and the earlier XOADC share a subset of

>> common code, so to be able to use the same code in both

>> drivers, we break out a separate file with the common code,

>> prefix exported functions that are no longer static with

>> qcom_* and bake an object qcom-vadc.o that contains both

>> files: qcom-vadc-common.o and qcom-spmi-vadc.o.

>>

>> Cc: linux-arm-kernel@lists.infradead.org

>> Cc: linux-arm-msm@vger.kernel.org

>> Cc: Ivan T. Ivanov <iivanov.xz@gmail.com>

>> Cc: Andy Gross <andy.gross@linaro.org>

>> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>

>> Cc: Stephen Boyd <sboyd@codeaurora.org>

>> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

>> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

>

> Looks superficially fine, but I'm guessing will need a respin

> as we have a fair bit of new stuff (and a couple of fixes) going

> through this driver at the moment.

>

> All but the two fixes I posted a few mins ago are in my testing

> branch and should go to Greg once I have confirmed testing on

> those two fixes.


I looked at the git and "testing"
contains a top commit named "guessing" fixing some 64bit
artithmetic (which looks correct) in the driver, shall I simply
rebase on top of that and hope for the best? :)

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jonathan Cameron Jan. 10, 2017, 9:14 p.m. UTC | #3
On 10/01/17 14:21, jic23@kernel.org wrote:
> On 10.01.2017 08:54, Linus Walleij wrote:

>> On Fri, Dec 30, 2016 at 8:01 PM, Jonathan Cameron <jic23@kernel.org> wrote:

>>> On 15/12/16 22:48, Linus Walleij wrote:

>>>> The SPMI VADC and the earlier XOADC share a subset of

>>>> common code, so to be able to use the same code in both

>>>> drivers, we break out a separate file with the common code,

>>>> prefix exported functions that are no longer static with

>>>> qcom_* and bake an object qcom-vadc.o that contains both

>>>> files: qcom-vadc-common.o and qcom-spmi-vadc.o.

>>>>

>>>> Cc: linux-arm-kernel@lists.infradead.org

>>>> Cc: linux-arm-msm@vger.kernel.org

>>>> Cc: Ivan T. Ivanov <iivanov.xz@gmail.com>

>>>> Cc: Andy Gross <andy.gross@linaro.org>

>>>> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>

>>>> Cc: Stephen Boyd <sboyd@codeaurora.org>

>>>> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

>>>> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

>>>

>>> Looks superficially fine, but I'm guessing will need a respin

>>> as we have a fair bit of new stuff (and a couple of fixes) going

>>> through this driver at the moment.

>>>

>>> All but the two fixes I posted a few mins ago are in my testing

>>> branch and should go to Greg once I have confirmed testing on

>>> those two fixes.

>>

>> I looked at the git and "testing"

>> contains a top commit named "guessing" fixing some 64bit

>> artithmetic (which looks correct) in the driver, shall I simply

>> rebase on top of that and hope for the best? :)

> I'm an idiot and pushed out the wrong branch.  Will fix up when

> I get home and push one with a sensible patch title!

> (It'll be the same content though - feel free to Ack that if

> you like ;)

> 

> Not my best half asleep patch writing ;)

Fixed... It's called testing for a reason ;)

Jonathan
> 

> Jonathan

>>

>> Yours,

>> Linus Walleij

>> -- 

>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in

>> the body of a message to majordomo@vger.kernel.org

>> More majordomo info at  http://vger.kernel.org/majordomo-info.html

> -- 

> To unsubscribe from this list: send the line "unsubscribe linux-iio" in

> the body of a message to majordomo@vger.kernel.org

> More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 7a40c04c311f..f9468d228b1e 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -38,7 +38,8 @@  obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
 obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
 obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
-obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
+qcom-vadc-y := qcom-vadc-common.o
+obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-vadc.o qcom-spmi-vadc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_STX104) += stx104.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index c2babe50a0d8..74d21afa34a9 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -28,6 +28,8 @@ 
 
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
 
+#include "qcom-vadc-common.h"
+
 /* VADC register and bit definitions */
 #define VADC_REVISION2				0x1
 #define VADC_REVISION2_SUPPORTED_VADC		1
@@ -75,69 +77,9 @@ 
 
 #define VADC_DATA				0x60	/* 16 bits */
 
-#define VADC_CONV_TIME_MIN_US			2000
-#define VADC_CONV_TIME_MAX_US			2100
-
-/* Min ADC code represents 0V */
-#define VADC_MIN_ADC_CODE			0x6000
-/* Max ADC code represents full-scale range of 1.8V */
-#define VADC_MAX_ADC_CODE			0xa800
-
-#define VADC_ABSOLUTE_RANGE_UV			625000
-#define VADC_RATIOMETRIC_RANGE_UV		1800000
-
-#define VADC_DEF_PRESCALING			0 /* 1:1 */
-#define VADC_DEF_DECIMATION			0 /* 512 */
-#define VADC_DEF_HW_SETTLE_TIME			0 /* 0 us */
-#define VADC_DEF_AVG_SAMPLES			0 /* 1 sample */
-#define VADC_DEF_CALIB_TYPE			VADC_CALIB_ABSOLUTE
-
-#define VADC_DECIMATION_MIN			512
-#define VADC_DECIMATION_MAX			4096
-
-#define VADC_HW_SETTLE_DELAY_MAX		10000
-#define VADC_AVG_SAMPLES_MAX			512
-
-#define KELVINMIL_CELSIUSMIL			273150
-
 #define VADC_CHAN_MIN			VADC_USBIN
 #define VADC_CHAN_MAX			VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM
 
-/*
- * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.
- * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for
- * calibration.
- */
-enum vadc_calibration {
-	VADC_CALIB_ABSOLUTE = 0,
-	VADC_CALIB_RATIOMETRIC
-};
-
-/**
- * struct vadc_linear_graph - Represent ADC characteristics.
- * @dy: numerator slope to calculate the gain.
- * @dx: denominator slope to calculate the gain.
- * @gnd: A/D word of the ground reference used for the channel.
- *
- * Each ADC device has different offset and gain parameters which are
- * computed to calibrate the device.
- */
-struct vadc_linear_graph {
-	s32 dy;
-	s32 dx;
-	s32 gnd;
-};
-
-/**
- * struct vadc_prescale_ratio - Represent scaling ratio for ADC input.
- * @num: the inverse numerator of the gain applied to the input channel.
- * @den: the inverse denominator of the gain applied to the input channel.
- */
-struct vadc_prescale_ratio {
-	u32 num;
-	u32 den;
-};
-
 /**
  * struct vadc_channel_prop - VADC channel property.
  * @channel: channel number, refer to the channel list.
@@ -471,33 +413,10 @@  static int vadc_measure_ref_points(struct vadc_priv *vadc)
 static s32 vadc_calibrate(struct vadc_priv *vadc,
 			  const struct vadc_channel_prop *prop, u16 adc_code)
 {
-	const struct vadc_prescale_ratio *prescale;
-	s64 voltage;
-
-	voltage = adc_code - vadc->graph[prop->calibration].gnd;
-	voltage *= vadc->graph[prop->calibration].dx;
-	voltage = div64_s64(voltage, vadc->graph[prop->calibration].dy);
-
-	if (prop->calibration == VADC_CALIB_ABSOLUTE)
-		voltage += vadc->graph[prop->calibration].dx;
-
-	if (voltage < 0)
-		voltage = 0;
-
-	prescale = &vadc_prescale_ratios[prop->prescale];
-
-	voltage = voltage * prescale->den;
-
-	return div64_s64(voltage, prescale->num);
-}
-
-static int vadc_decimation_from_dt(u32 value)
-{
-	if (!is_power_of_2(value) || value < VADC_DECIMATION_MIN ||
-	    value > VADC_DECIMATION_MAX)
-		return -EINVAL;
-
-	return __ffs64(value / VADC_DECIMATION_MIN);
+	return qcom_vadc_calibrate(&vadc_prescale_ratios[prop->prescale],
+				   &vadc->graph[prop->calibration],
+				   (prop->calibration == VADC_CALIB_ABSOLUTE),
+				   adc_code);
 }
 
 static int vadc_prescaling_from_dt(u32 num, u32 den)
@@ -752,7 +671,7 @@  static int vadc_get_dt_channel_data(struct device *dev,
 
 	ret = of_property_read_u32(node, "qcom,decimation", &value);
 	if (!ret) {
-		ret = vadc_decimation_from_dt(value);
+		ret = qcom_vadc_decimation_from_dt(value);
 		if (ret < 0) {
 			dev_err(dev, "%02x invalid decimation %d\n",
 				chan, value);
diff --git a/drivers/iio/adc/qcom-vadc-common.c b/drivers/iio/adc/qcom-vadc-common.c
new file mode 100644
index 000000000000..f67fc5e2a702
--- /dev/null
+++ b/drivers/iio/adc/qcom-vadc-common.c
@@ -0,0 +1,38 @@ 
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/math64.h>
+#include <linux/log2.h>
+#include <linux/err.h>
+
+#include "qcom-vadc-common.h"
+
+s32 qcom_vadc_calibrate(const struct vadc_prescale_ratio *prescale,
+			const struct vadc_linear_graph *graph,
+			bool absolute,
+			u16 adc_code)
+{
+	s64 voltage;
+
+	voltage = adc_code - graph->gnd;
+	voltage *= graph->dx;
+	voltage = div64_s64(voltage, graph->dy);
+
+	if (absolute)
+		voltage += graph->dx;
+
+	if (voltage < 0)
+		voltage = 0;
+
+	voltage = voltage * prescale->den;
+
+	return div64_s64(voltage, prescale->num);
+}
+
+int qcom_vadc_decimation_from_dt(u32 value)
+{
+	if (!is_power_of_2(value) || value < VADC_DECIMATION_MIN ||
+	    value > VADC_DECIMATION_MAX)
+		return -EINVAL;
+
+	return __ffs64(value / VADC_DECIMATION_MIN);
+}
diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h
new file mode 100644
index 000000000000..b41cb501eef8
--- /dev/null
+++ b/drivers/iio/adc/qcom-vadc-common.h
@@ -0,0 +1,69 @@ 
+/*
+ * Code shared between the different Qualcomm PMIC voltage ADCs
+ */
+
+#define VADC_CONV_TIME_MIN_US			2000
+#define VADC_CONV_TIME_MAX_US			2100
+
+/* Min ADC code represents 0V */
+#define VADC_MIN_ADC_CODE			0x6000
+/* Max ADC code represents full-scale range of 1.8V */
+#define VADC_MAX_ADC_CODE			0xa800
+
+#define VADC_ABSOLUTE_RANGE_UV			625000
+#define VADC_RATIOMETRIC_RANGE_UV		1800000
+
+#define VADC_DEF_PRESCALING			0 /* 1:1 */
+#define VADC_DEF_DECIMATION			0 /* 512 */
+#define VADC_DEF_HW_SETTLE_TIME			0 /* 0 us */
+#define VADC_DEF_AVG_SAMPLES			0 /* 1 sample */
+#define VADC_DEF_CALIB_TYPE			VADC_CALIB_ABSOLUTE
+
+#define VADC_DECIMATION_MIN			512
+#define VADC_DECIMATION_MAX			4096
+
+#define VADC_HW_SETTLE_DELAY_MAX		10000
+#define VADC_AVG_SAMPLES_MAX			512
+
+#define KELVINMIL_CELSIUSMIL			273150
+
+/*
+ * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.
+ * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for
+ * calibration.
+ */
+enum vadc_calibration {
+	VADC_CALIB_ABSOLUTE = 0,
+	VADC_CALIB_RATIOMETRIC
+};
+
+/**
+ * struct vadc_linear_graph - Represent ADC characteristics.
+ * @dy: numerator slope to calculate the gain.
+ * @dx: denominator slope to calculate the gain.
+ * @gnd: A/D word of the ground reference used for the channel.
+ *
+ * Each ADC device has different offset and gain parameters which are
+ * computed to calibrate the device.
+ */
+struct vadc_linear_graph {
+	s32 dy;
+	s32 dx;
+	s32 gnd;
+};
+
+/**
+ * struct vadc_prescale_ratio - Represent scaling ratio for ADC input.
+ * @num: the inverse numerator of the gain applied to the input channel.
+ * @den: the inverse denominator of the gain applied to the input channel.
+ */
+struct vadc_prescale_ratio {
+	u32 num;
+	u32 den;
+};
+
+s32 qcom_vadc_calibrate(const struct vadc_prescale_ratio *prescale,
+			const struct vadc_linear_graph *graph,
+			bool absolute,
+			u16 adc_code);
+int qcom_vadc_decimation_from_dt(u32 value);