| Message ID | 20161205181521.10586-3-fparent@baylibre.com |
|---|---|
| State | Accepted |
| Commit | 2b2cab24ac7de0df79ab48d31473dbc06ff3740a |
| Headers | show |
On Mon, Dec 05, 2016 at 07:15:21PM +0100, Fabien Parent wrote: > The configuration used to error correction was not in line with what > linux and the ROM code is using. Fix it by using the correct > configuration. Now u-boot and the SPL are able to read correctly > anything written by them. > > Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com> -- Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
On Mon, Dec 05, 2016 at 07:15:21PM +0100, Fabien Parent wrote: > The configuration used to error correction was not in line with what > linux and the ROM code is using. Fix it by using the correct > configuration. Now u-boot and the SPL are able to read correctly > anything written by them. > > Signed-off-by: Fabien Parent <fparent@baylibre.com> > Reviewed-by: Tom Rini <trini@konsulko.com> Applied to u-boot/master, thanks! -- Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 2101086d59..a1e5f4481f 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -173,6 +173,7 @@ #undef CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST +#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) @@ -184,11 +185,10 @@ CONFIG_SYS_MALLOC_LEN - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_NAND_ECCPOS { \ - 24, 25, 26, 27, 28, \ - 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ - 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ - 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ - 59, 60, 61, 62, 63 } + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \ + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \ + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \ + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 } #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 #define CONFIG_SYS_NAND_ECCSIZE 512
The configuration used to error correction was not in line with what linux and the ROM code is using. Fix it by using the correct configuration. Now u-boot and the SPL are able to read correctly anything written by them. Signed-off-by: Fabien Parent <fparent@baylibre.com> --- include/configs/omapl138_lcdk.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) -- 2.11.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot